Texas Instruments

Buffers & Line Drivers Dual Buffer/Driver w/ 3-State Outputs

The FCT162H952ATPACTG4 is a 16-bit registered bus transceiver from Texas Instruments in the FCT logic family, featuring independent bidirectional control and 24 mA output drive current for high-drive bus interfacing. It integrates two 8-bit ports with registered outputs in a 56-pin SSOP package. Designed for high-speed backplane and bus buffering in microprocessor and FPGA systems.

Conv DC-DC 2.3V to 6V Step Up Single-Out 2.8V to 18.5V 2A 8-Pin TSSOP T/R

PLASTIC, LQFP-128

Operational Amplifiers - Op Amps Quadruple Low-Power Op Amp

PINA253A1IPW is a 20 pins integrated circuit by Texas Instruments. Key specs: 20 pins, Small Outline Packages package, 80V, Low-/High-Side, Bi-Directional, CSA w/PWM Rejection & Precision Integrated Shunt Resistor. From quote-based sourcing, in stock checks support worldwide shipping.

32-bit Microcontrollers - MCU PiccoloG 32-bit MCU with 100 MHz, FPU, TMU, 256 KB Flash, CLA, PGAs, SDFM 100-LQFP -40 to 125

The MC3303NE4 is a quad general-purpose voltage-feedback operational amplifier from Texas Instruments operating on ±15V or 30V single supply with 70dB minimum CMRR and internal frequency compensation, in a 14-pin PDIP through-hole package. It features 0.5µA typical input bias current and 10mV maximum input offset voltage for reliable analog signal processing. Available from authorized distributors with worldwide shipping.

Single-phase Metering SoC with 2 Sigma-Delta ADCs, LCD, Real-Time Clock, 32KB Flash, 2KB RAM

The CD4018BEE4 is a 5-bit programmable Johnson ring counter IC from Texas Instruments housed in a 16-pin PDIP package. It features a preset input and UP-counting direction with a 50 pF load capacitance for CMOS 4000-series compatibility. Available in stock with worldwide shipping.

The FCT162H952ATPACTE4 is a 16-bit registered bus transceiver from Texas Instruments in the FCT logic family. It features bidirectional data flow with independent control and 24 mA output sink current in a 56-pin SSOP package. Available in RoHS-compliant packaging with in-stock worldwide shipping.

TEXAS INSTRUMENTS - UCC28634D - HIGH-POWER FLYBACK CONTROLLER, SOIC-7

The TPS715345DCKRG4 is a 50 mA fixed-output, high-input-voltage LDO regulator with a 3.45 V output and up to 24 V input. Key specs include 0.415 V typical dropout, SOT-323 package, and wide supply range from 4.15 V to 24 V. Available from stock worldwide with competitive pricing.

Use the download button to access the MSP430F67791AIPZ schematic symbol, PCB footprint, and 3D model.

CD74HC423M96G4 is a dual retriggerable monostable multivibrator in HC CMOS logic by Texas Instruments. Key specs include 2 independent one-shot channels, 50 pF load capacitance, and a 16-pin SOIC package. Available from stock with worldwide shipping.

Analog to Digital Converters - ADC 16-Bit 250kHz CMOS w/Parallel Interface

Digital Isolators High Speed, Robust EMC Reinforced Dual-Channel Digital Isolator 16-SOIC -55 to 125

Single-phase Metering SoC with 3 Sigma-Delta ADCs, LCD, Real-Time Clock, 64KB Flash, 4KB RAM

Use the download button to access the TPS75833KTTR schematic symbol and PCB footprint.

Flip Flop D-Type Pos-Edge 2-Element 14-Pin TSSOP T/R

The SN74LV74D is a dual D-type positive-edge-triggered flip-flop logic IC from Texas Instruments in the LV family, available in a 14-pin small outline package. It supports up to 24MHz maximum operating frequency with low-voltage CMOS compatibility, 6mA output sink current, and output ground bounce less than 0.8V. Competitively priced and available in stock with worldwide shipping for digital logic design.

Application Processors 3.135V to 5.25V 169-Pin NFBGA T/R

Encoders, Decoders, Multiplexers & Demultiplexers QUAD 2Ln To 1Ln Data Selector Multiplexer

Inverter Schmitt Trigger 1-Element CMOS 5-Pin SC-70 T/R

4.5 V to 18 V input, dual 2 A output, synchronous step-down converter, with 1 ms fixed soft start

Special Purpose Amplifiers WB 420MHz 40dB Gain Adjust Range Linear

The TPS54283PWPG4 is a dual-output synchronous step-down DC-DC controller from Texas Instruments supporting 4.5V to 28V input. It delivers up to 2A per channel with adjustable 0.8V to 25.2V output using current-mode PWM control in a 14-pin HTSSOP package. Available from stock worldwide for industrial and telecom power designs.

16-bit Microcontrollers - MCU Ultra low power Micro Controller

The SN74LV74APWG4 is a dual D-type positive-edge-triggered flip-flop from Texas Instruments in a 14-pin TSSOP package. It operates at up to 45MHz with 2V to 5.5V supply range and 6mA output drive. From $0.35 in stock with worldwide shipping.

Use the download button to access the TL051CP schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS560430X3FDBVT schematic symbol, PCB footprint, and 3D model.

Comparator Single 18V 8-Pin VSSOP T/R

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SOIC Tube

Analog to Digital Converters - ADC 14-Bit 500kSPS 8-Channel SAR ADC With Bipolar Inputs Off 5V Supply 38-TSSOP -40 to 125

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin TSSOP T/R

SOIC-14

Texas Instruments SN74HC157PWG4 is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 16 pins, -40°C to 85°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

SN74LV00D is a quadruple 2-input NAND gate in a 14-pin SOIC package, operating across a 2 V to 5.5 V supply range with 6 mA output sink current and 50 pF load drive. Part of the LV logic family, it is suited for low-voltage digital gating and combinational logic in portable and industrial embedded designs.

Automotive Catalog Octal Buffers And Line Drivers With 3-State Outputs

TSSOP-20

Precision 36V 8-Channel/16-Channel Single Ended CMOS Multiplexer

Analog to Digital Converters - ADC 2.35V-5.25V 12 bit 1 MSPS Serial

Inverter Schmitt Trigger 1-Element CMOS 5-Pin SC-70 T/R

Single Power Supply, Single BUFFER GATE w/ 3-State Output (active high enable)

The LMC6044IN NOPB is a quad CMOS rail-to-rail output general-purpose op-amp from Texas Instruments in a 14-pin DIP package, operating from ±7.75 V or 15.5 V single supply, offering micropower consumption for battery-powered analog signal conditioning.

Analog to Digital Converters - ADC 2.35V-5.25V 12 bit 1 MSPS Serial

Texas Instruments SN65LBC184DG4, Line Transceiver, ISO 8482, 5 V, 8-Pin SOIC

Single power supply 2-input POSITIVE AND Gate with Logic Level Shifter

16-bit Microcontrollers - MCU Mixed Signal MCU

TEXAS INSTRUMENTS - TLE2022IPE4 . - Operational Amplifier, Dual, 2 Amplifier, 1.2 MHz, 0.5 V/µs, ± 2V to ± 20V, DIP, 8 Pins