Texas Instruments

TPS25925x, TPS25926x Simple 5-V/12-V eFuse Protection Switches

25MHz MCU with two 16-bit High Res Timers, 16 KB flash, 2KB RAM, 10-bit ADC, 16-channel Comparator

High Accuracy, Miniature 1A, Step-Down DC-DC Converter for Portable Applications

LNB Voltage Regulator with 1MHz,I2C Interface Power Management IC (PMIC)

Use the download button to access the DP83867IRRGZT schematic symbol, PCB footprint, and 3D model.

Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and 3-State Outputs

DRV120 Single-Channel Relay, Solenoid, Valve Low-Side Driver With Current Regulation

Octal Buffers And Line Drivers With 3-State Outputs

40ns, micro-Power, Rail-to-Rail Input, Single-Channel Comparator with Push-Pull Outputs

Dual, 200mA, Low-IQ, Low-Dropout Regulator for Portable Devices

Use the download button to access the SN65DP159RSBR schematic symbol, PCB footprint, and 3D model.

Precision Micropower Shunt Voltage Reference

200mA, Low-IQ, Low-Noise, Low-Dropout (LDO) Regulator in Ultra-Small 0.8mm x 0.8mm WCSP

106dB SNR Stereo DAC

Micropower, 300mA Ultra Low-Dropout CMOS Voltage Regulator

Octal Buffers/Drivers With 3-State Outputs

The LM25061PMME-2/NOPB is a positive low-voltage hot-swap and power-limiting controller from Texas Instruments, operating from 2.9V to 17V input with an adjustable reset threshold at 2.6V in a 10-pin MSOP package. It controls inrush current during board hot-insertion and limits sustained overcurrent, protecting downstream circuitry in telecom and server slot applications. Available in stock globally for positive-rail hot-swap and power protection designs.

USB Dedicated Charging Port Controller

Use the download button to access the TPS2063DR schematic symbol, PCB footprint, and 3D model.

LED Lighting Drivers Dual 1.5A Current Source Camera Flash LED Driver 12-DSBGA -40 to 85

High-Output RS-485 Transceiver

Polyphase Metering SoC with 7 Sigma-Delta ADCs, LCD, Real-Time Clock, 512KB Flash, 32KB RAM

1 to 6000 MHz 18dB RF Gain Block Amplifier with Powerdown Pin

Automotive Single 2-Input Exclusive-OR Gate

Use the download button to access the TLC279CD schematic symbol, PCB footprint, and 3D model.

Automotive 20MHz Low-Noise 1.8V RRI/O CMOS Operational Amplifier With Shutdown

Precision Micropower Shunt Voltage Reference

3-17V 3A Step-Down Converter in 3x3 QFN Package

Adjustable, 500-mA, 3-MHz Step-Down Converter in QFN or Chip-Scale

Use the download button to access the TLV62084DSGR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS2103DBVR schematic symbol, PCB footprint, and 3D model.

Serializers & Deserializers - Serdes 125MHz-312.5MHz FPGA Link Deserializer

Use the download button to access the SN74LVC3G04YZPR schematic symbol, PCB footprint, and 3D model.

3.3-V, 8:1, 1-channel analog multiplexer

1.8V, 2.9uA, 90kHz, Rail-to-Rail I/O Operational Amplifiers

Use the download button to access the PTH08T240WAS schematic symbol, PCB footprint, and 3D model.

The CD74HC4094NSR is a high-speed CMOS 8-stage serial-in parallel-out shift and store bus register from Texas Instruments in a 16-pin SOIC package. It operates up to 20 MHz, supports 2V to 6V supply, and features 3-state parallel outputs for direct bus connection. Available from stock worldwide with competitive pricing.

16-Bit Single-Channel Programmable Current Output DAC for 4-20mA Current-Loop Applications

Texas Instruments SN74AUP1G00DCKR is a single 2-input NAND gate in ultra-low-power AUP logic family, operating from 0.8V to 3.6V with max propagation delay of 3.8ns and 4mA output drive. Housed in a compact SC-70 5-pin package. From $0.10 in stock worldwide shipping.

3.3-V Supply RS-485 With IEC ESD Protection

Audio Amplifiers 27-W, 2-MHz Digital Input 4-Channel Automotive Class-D Audio Amplifier 56-HSSOP -40 to 125

8-Bit FET 2.5-V/3.3-V Low-Voltage High-Bandwidth Bus Switch

Low voltage, 45MHz, rail-to-rail output operational amplifier

1.2A High Power White LED Driver with I2C Compatible Interface

Dual 1.8V RRIO, 8MHz Amplifier

1A Low Voltage Brushed DC Motor Driver with Speed Regulation (I2C Ctrl)

Use the download button to access the TXS4555RGTR schematic symbol, PCB footprint, and 3D model.

Single Output LDO, 800mA, Fixed and Adj., Internal Current limit, Thermal Overload Protection

1-A, Positive Fixed Voltage, Low-Dropout Regulator

Current & Power Monitors & Regulators Automotive overcurrent protection high-speed, precision current sense amplifier with int. comparator 8-VSSOP -40 to 125