Texas Instruments

The PUCC24624D is a high-frequency dual synchronous rectifier controller for LLC resonant converters from Texas Instruments, available in a small outline package. It drives two synchronous rectifier FETs with accurate timing to maximize efficiency in isolated DC-DC power supply designs. Ideal for server power supplies, telecom rectifiers, and high-efficiency industrial power conversion applications.

Buffers & Line Drivers Octal FET Bus Switch

Use the download button to access the DRV8306HRSMT schematic symbol, PCB footprint, and 3D model.

Texas Instruments SN74HC241PWG4 is an 8-channel non-inverting bus driver with 3-state outputs in HC CMOS logic. It supports bidirectional enable control and drives up to 50 pF load capacitance at standard CMOS voltage levels. Offered in a 20-pin TSSOP package for high-density digital bus applications.

Gate Drivers A 595-UCC5390ECDWV

TEXAS INSTRUMENTS - THVD1552D - RS485 TRANSCEIVER, SOIC-14

Current Mode PWM Controller 1.5A 16-Pin PDIP Tube

Translation - Voltage Levels 1B Bidir Vltg-Level Translator

TEXAS INSTRUMENTS - LM78L15ACM - Linear Voltage Regulator, 7815, Fixed, Positive, 16.7V To 35V In, 15V And 0.1A Out, SOIC-8

Translation - Voltage Levels 1B Bidir Vltg-Level Translator

SON-6

Multi Function Gate 1-Element 2-IN CMOS 6-Pin SOT-563 T/R

1.8V-5.5V input, tiny, 600mA ultra-low Iq step-down converter in 1.05 x 0.70mm chip scale package

Use the download button to access the SN65LVDT14PWG4 schematic symbol, PCB footprint, and 3D model.

The INA212AIDCKRG4 is a precision current shunt monitor from Texas Instruments with 26V common-mode voltage range and 140dB CMRR. Features 35µV max offset voltage in a compact 6-pin SC-70 package. Available from stock with worldwide shipping.

Texas Instruments LT1054IDWRG4 is a switched-capacitor voltage inverter and regulator generating negative voltages up to -5V at 100mA output current from a 3.5V to 15V input supply. Packaged in a 16-pin SOIC with voltage-mode control. Available from stock with worldwide shipping.

LVDS Interface IC Interconnect Ext Chipset

8-Bit Dual-Supply Bus Transceiver

TEXAS INSTRUMENTS - THVD1512DGS - RS485 TRANSCEIVER, 500KBPS, VSSOP-10

1-µA, ultra-low-IQ, 200-mA low-dropout (LDO) regulator in a small-sized package

PTL432LIBCDBZR is a precision adjustable shunt voltage regulator by Texas Instruments with optimized reference current, available in a compact SOT-23 3-pin package for low-current feedback and reference applications. Key specs: two-terminal adjustable shunt regulator, optimized reference current, SOT-23 package. Available in stock worldwide.

Voltage References 3V 4ppm/DegC 100uA SOT23-6 Series

Inverter 6-Element CMOS 14-Pin TSSOP Tube

1-µA, ultra-low-IQ, 200-mA low-dropout (LDO) regulator in a small-sized package

Quadruple Low-Power Line Receiver

IC DAC 8BIT MULTIPLYING 16-DIP

BASIC ISOLATED AMPLIFIER FOR AUTO

Texas Instruments CD74AC138M96G4 is a 3-to-8 line inverting decoder and demultiplexer in a 16-pin SOIC package, featuring advanced CMOS AC logic for high-speed operation. It includes two active-low and one active-high enable inputs, 50 pF load capacitance tolerance, and 24 mA output sink current for robust bus driving. Available in tape and reel packaging for automated assembly with global distribution through authorized distributors.

DIP, DIP16,.3

Switching Controllers Current-Mode PWM Controller

LDO Regulator Pos 2.5V 0.4A 5-Pin SOT-23 T/R

The PTL431LIACDBZR is an adjustable precision shunt voltage regulator from Texas Instruments in a 3-pin SOT-23 package. It offers optimized reference current performance in a two-terminal configuration, enabling accurate voltage regulation from 1.24 V upward using a simple external resistor divider. Compact and RoHS-compliant for consumer and industrial designs.

LDO Regulator Pos 0.798V to 3.6V 3A 20-Pin VQFN EP T/R

LVDS Interface IC Quad Transmitter w/Flow-Thru Pinout

Use the download button to access the TL2844PE4 schematic symbol, PCB footprint, and 3D model.

PC Power Supply Supervisor

The PTL432LIBIDBZR is an adjustable precision shunt voltage regulator from Texas Instruments with an optimized reference current architecture, designed for low-power flyback converter feedback and precision reference applications. Operating in a 3-pin SOT-23 package, it adjusts cathode voltage from approximately 1.24V to 36V using an external resistor divider. Its minimized reference current reduces power dissipation and simplifies optocoupler feedback design in switching power supplies.

Switching Controllers Current-Mode PWM Controller

Conv DC-DC 3.1V to 17V Step Down Single-Out 3.3V 1.5A 16-Pin VQFN EP T/R

Texas Instruments TL031CDRG4 is an enhanced JFET-input, low-power precision operational amplifier in SOIC-8 package, featuring 70 dB minimum CMRR, 4.5 mV max input offset voltage, and 0.2 pA typical bias current. Designed for high-impedance sensor interfaces, precision signal conditioning, and instrumentation applications where ultra-low input bias current and low power consumption are critical. Available from authorized distributors worldwide with same-day shipping.

Operational Amplifiers - Op Amps Dual Low-Power Rail-to-Rail I/O

The PATL431LIBQDBZR is a high bandwidth, low quiescent current programmable shunt voltage reference from Texas Instruments. It offers a wide adjustable output voltage range and tight initial accuracy, making it ideal for precision analog circuit designs. Available in a compact SOT-23 3-pin package with worldwide stock and global shipping.

Use the download button to access the ISO7721FDWVR schematic symbol, PCB footprint, and 3D model.

TLC548CPE4 is an 8-bit successive approximation ADC from Texas Instruments in an 8-pin DIP package, with a single analog input channel and up to 17 µs conversion time. It features a 3-wire SPI-compatible serial interface and supports analog input voltages up to 6 V for versatile signal acquisition. RoHS-compliant and suitable for low-speed data acquisition, industrial sensors, and microcontroller-based measurement systems.

The PATL432LIBQDBZR is a high-bandwidth, low-quiescent-current programmable precision shunt voltage regulator from Texas Instruments, designed for adjustable voltage reference and feedback regulation applications. Housed in a 3-pin SOT-23 package, it offers wide cathode voltage adjustment from 1.24V to 36V with fast response and high bandwidth for switching power supply feedback networks. Suitable for isolated flyback, LED driver, and precision reference circuits.

PATL432LIBIDBZR is a high-bandwidth, low quiescent current programmable precision shunt voltage reference by Texas Instruments in a compact SOT-23 3-pin package. Key specs: three-terminal adjustable voltage reference, low Iq for energy-sensitive applications, SOT-23 surface-mount package. Available in stock with worldwide shipping.

PATL432LIAIDBZR is a high-bandwidth, low quiescent current programmable precision shunt voltage reference by Texas Instruments, packaged in a compact SOT-23 3-pin package. Key specs: three-terminal voltage reference topology, low Iq for battery applications, SOT-23 package. Available in stock with worldwide shipping.

Buffer/Line Driver 16-CH Non-Inverting 3-ST BiCMOS 48-Pin SSOP T/R

16-Bit, 500kSPS, 8-Ch SAR ADC w/ Bipolar Inputs Using 5V Supply, Low-Drift Vref, and Wide Temp Range

NAND Gate 4-Element 2-IN Bipolar 14-Pin PDIP Tube