Texas Instruments

The CD74HC4020MG4 is a 14-bit asynchronous ripple-carry binary up-counter from Texas Instruments in the HC CMOS logic family, packaged in a 16-pin SOIC. It operates up to 20 MHz with 12 output stages accessible for frequency division and counting applications, featuring a load/preset input and 50 pF load capacitance. Ideal for clock division, timing generation, and event counting in consumer, industrial, and communications electronics.

Single 9-A High Speed Low-Side MOSFET Driver With Enable

The PLM5146QRGYTQ1 is an AEC-Q100 qualified automotive-grade switching controller IC from Texas Instruments, introduced in 2018. It supports versatile DC-DC conversion topologies for demanding automotive power supply designs. Available in volume with worldwide shipping starting from competitive pricing.

The LM239NE4 is a quad differential voltage comparator from Texas Instruments featuring four independent open-collector outputs for flexible logic interfacing and wired-OR configurations. It operates from a single 2V to 36V supply or dual supplies up to ±18V, with 5mV maximum input offset voltage and 0.25µA bias current. Packaged in a 14-pin DIP, it suits threshold detection, window comparator, and level-shifting applications across commercial to industrial environments.

The CD4029BF3A is a 4-bit synchronous up/down binary or BCD decade counter in a 16-pin Ceramic DIP package. It supports presettable inputs, bidirectional counting, and binary/BCD mode selection with wide supply voltage range from 3 V to 15 V. Available from stock with worldwide shipping.

Counter Single 4-Bit Async Binary/Decade UP/Down 16-Pin CDIP Tube

RFID Transponders Multi-Standard High Frequency RFID

SOIC-24

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 16-Pin CDIP Tube

Logic Gates Quadruple 2-Input Positive-NAND gates

Quad Transmitter RS-422 16-Pin CDIP Tube

CD40174BPWE4 is a 16 pins logic ic by Texas Instruments. Key specs: 16 pins, Small Outline Packages package, TSSOP-16. From quote-based sourcing, in stock checks support worldwide shipping.

RS-232 Interface IC 3 to 5.5V Multichan RS-232 Line Drv/Rec

The DS26F32MJRQMLV is a quad differential line receiver from Texas Instruments compliant with EIA-422 and EIA-423 standards, housed in a 16-pin ceramic DIP package. It features four independent receiver channels with differential inputs, high-speed data reception up to RS-422 specifications, and wide common-mode range suitable for industrial and military applications. Available in tube packaging with guaranteed military-grade reliability and worldwide shipping.

Dual Channel Dual ADC Delta-Sigma 48ksps 16-bit Serial 14-Pin SOIC Tube

Dual Processor Supervisory Circuit with Watchdog Timer

Conv DC-DC 4.5V to 60V Step Down Single-Out 0.8V to 58.8V 3.5A Automotive 10-Pin WSON EP T/R

The TPS54316PWPR is a 3A synchronous step-down SWIFT buck converter from Texas Instruments accepting 3V to 6V input and providing a fixed 3.3V output regulated using voltage-mode PWM control in a 20-pin SOIC package. It integrates high-side and low-side MOSFETs for high efficiency and minimal external component count. Ideal for point-of-load conversion from 5V bus rails in embedded systems, DSPs, FPGAs, and communications equipment.

Switching Voltage Regulators Lo-In Voltage 3A Sync Buck Converter

The CD4040BF is a 12-stage ripple-carry binary counter IC in a ceramic 16-pin DIP package, operating from 3 V to 15 V supply. It provides outputs from all 12 counter stages with a maximum clock frequency of 12 MHz at 10 V. Available from stock worldwide with prompt shipping.

Dual 500-nA RRIO nanopower operational amplifier

Latch Transparent 4-CH D-Type 16-Pin SOP T/R

DIP-16

The CD4042BDW is a quad D-type latch from Texas Instruments in the 4000 CMOS series, housed in a 16-pin SOIC package. It features programmable trigger polarity, 8 MHz maximum frequency, and 50 pF load capacitance, enabling flexible clocked data storage. Ideal for data registers, keyboard debounce circuits, and general-purpose digital latch applications in consumer and industrial electronics.

Latch Transparent 4-CH D-Type 16-Pin SOIC T/R

The PESDS314DBVT is a 4-line ESD and surge protection diode array from Texas Instruments, designed to protect data lines from electrostatic discharge and transient voltage surges, housed in a compact 5-pin SOT-23 package for use in high-speed consumer electronics and communication interfaces. In stock worldwide.

The CD4042BDE4 is a transparent 4-channel D-type latch from Texas Instruments, featuring programmable trigger type and 16-pin SOIC package. It operates with a 50 pF load capacitance and 4.2 mA output current, making it ideal for data storage and bus interfacing applications. Available from authorized distributors worldwide with fast shipping.

Latch Transparent 4-CH D-Type 16-Pin CDIP Tube

The INA129SJD is a precision instrumentation amplifier from Texas Instruments with 113 dB minimum CMRR, 125 µV maximum offset voltage, and 1.3 MHz bandwidth. It is designed for accurate differential signal amplification in sensor and medical applications via an 8-pin ceramic DIP package. From $12.50, in stock, worldwide shipping.

Bus XCVR Single 8-CH 3-ST 20-Pin CDIP Tube

INA129UG4 Texas Instruments, Instrumentation Amplifier, 8-Pin SOIC

REG101NA-3.3 is a 100 mA low-dropout (LDO) linear voltage regulator from Texas Instruments in a SOT-23-5 package, providing a fixed 3.3 V output with ultra-low quiescent current and high PSRR. Designed for portable and battery-powered electronics requiring stable, low-noise 3.3 V regulation.

The CC2520RHDTG4 is a second-generation 2.4GHz ZigBee and IEEE 802.15.4 RF transceiver from Texas Instruments, operating at a nominal 3V supply. It features a 28-pin QFN package with an integrated heat sink slug and supports low-power wireless communication, making it ideal for IEEE 802.15.4-based mesh networks, smart home, and industrial IoT applications.

Oscillator VCO 25MHz to 85MHz 15pF Squarewave/TTL 50% 5V 16-Pin PDIP Thru-Hole Tube

Current Mode PWM Controller 0V to 30V 200mA 8-Pin SOIC T/R

Shift Register Single 8-Bit Serial/Parallel to Parallel 16-Pin CDIP Tube

Shift Register Single 8-Bit Serial/Parallel to Parallel 16-Pin SOIC Tube

LVDS Interface IC Quad LVDS Receiver w/Flow-Thru Pinout

LDO Voltage Regulators Low Input Voltage Any Cap 1-A

DAC8831IBDG4 is a 16-bit single-channel serial-input digital-to-analogue converter from Texas Instruments in a 14-pin SOIC package. It provides a bipolar output range of -2.5 V to 2.5 V with a maximum linearity error of 0.0031%. Available in tube packaging from authorised distributors with worldwide shipping.

SOIC-14

Driver 4.3A 1-OUT Inv/Non-Inv 8-Pin SOIC T/R

200mA, Low Quiescent Current, Ultra-Low Noise, High PSRR Low Dropout Linear Regulator

Audio Amplifiers TAS5720A-Q1 1x25-W Digital Input Closed-Loop Automotive Class-D Audio Amplifier 32-HTSSOP -40 to 105

LDO Voltage Regulators 200mA High PSRR LDO 3.3V

Low-quiescent current supervisor with programmable-delay and manual reset

The SN75HVD10DRG4 is a 3.3V RS-485 differential transceiver from Texas Instruments supporting 32 Mbps signaling rate, TIA-485-A/EIA-485 compliant, with Schmitt-trigger inputs, half-duplex operation, and 8-pin SOIC package for robust industrial communication. In stock worldwide.

The SN75HVD10DG4 is a 3.3V differential RS-485/RS-422 line transceiver from Texas Instruments supporting signaling rates up to 32 Mbps in an 8-pin SOIC package. It features a differential Schmitt trigger input, complies with EIA-485-A, TIA-485-A, and ISO 8482 standards, and provides robust half-duplex communication for industrial networks. Ideal for RS-485 bus systems, industrial fieldbus protocols, and long-distance serial data transmission.

Automotive 4A/6A, 5.7 kVrms Isolated Dual Channel Gate Driver

The SN74HC241DWE4 is an octal non-inverting buffer/line driver with 3-state outputs in the HC CMOS family, featuring dual enable inputs, 150 pF load capacitance rating, 20-pin SOIC package, and 2V to 6V supply operation. In stock with worldwide shipping.