Texas Instruments

Inverter Schmitt Trigger 6-Element CMOS 14-Pin SOIC T/R

IC TXRX RS485 EXT MODE 8-SOIC

Latches Tri-St Octal D-Type

0.9-Ω, 5-V, 1:1 (SPST), 1-channel analog switch (active low)

SOP-20

CD4078BMG4 is a Texas Instruments integrated circuit for industrial and embedded electronics. It provides 14 pins, -55°C to 125°C, Small Outline Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.

Operational Amplifiers - Op Amps 550-uA/Ch 3-MHz R-to-R Otpt Oper Amp

Operational Amplifiers - Op Amps 550-uA/Ch 3-MHz R-to-R Otpt Oper Amp

TLV272CDGKG4 is a dual rail-to-rail output operational amplifier with 550 µA per channel quiescent current and 3 MHz gain-bandwidth product in an 8-pin SOIC package. It provides 85 dB typical CMRR and a maximum input offset voltage of 7000 µV. Designed for battery-powered signal conditioning, sensor interfaces, and active filter circuits.

The TL5001ACDG4 is a PWM DC-to-DC switching controller from Texas Instruments designed for voltage-mode control in power supply designs. It accepts input voltages from 3.6V to 40V and supports adjustable output regulation with built-in oscillator and error amplifier. Packaged in an 8-pin SOIC, it suits industrial, telecom, and embedded power conversion applications.

Op Amp Dual High Speed Amplifier R-R O/P ±2.7V/5.4V 8-Pin VSSOP T/R

The TLV2772IDGKRG4 is a dual operational amplifier from Texas Instruments featuring rail-to-rail output, 2.7V supply operation, and high slew rate performance. It offers 3MHz gain bandwidth, low offset voltage of 2.7mV, and operates across -40°C to 125°C industrial temperature range. Available in MSOP-8 package, suitable for precision signal conditioning and portable battery-powered systems.

Operational Amplifiers - Op Amps 550-uA/Ch 3-MHz Rail-to-Rail Out

DC DC Cntrlr Single-OUT PWM DC to DC Controller 3.6V to 40V Input 8-Pin SOIC T/R

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin PDIP Tube

The TLV2772AIDG4 is a dual-channel, high-slew-rate operational amplifier from Texas Instruments, designed for rail-to-rail output operation from a 2.7V single supply. It features 60 dB minimum CMRR, 350 µV maximum bias current, and is optimized for low-voltage signal processing applications. Housed in an 8-pin SOIC package, it is ideal for portable instrumentation, battery-powered devices, and audio amplification circuits.

DC DC Cntrlr Single-OUT PWM DC to DC Controller 3.6V to 40V Input 8-Pin SOIC T/R

Operational Amplifiers - Op Amps Dual Micropwr 2.5V RRIO Single Supply

Comparator Single 8V 5-Pin SOT-23 T/R

The PDRV110AQPWRQ1 is an automotive-grade single-channel low-side current controller from Texas Instruments designed for driving relays, solenoids, and valves. It uses PWM current-mode control with a 6 V to 15 V input range and is AEC-Q100 qualified for harsh automotive environments. Available in a 14-pin SOP package with worldwide in-stock shipping.

Counter Single 4-Bit Async Binary UP/Down 16-Pin SOIC T/R

The CD74ACT164M96G4 is an 8-bit serial-in, parallel-out shift register from Texas Instruments, designed for high-speed data conversion from serial to parallel format. Based on the ACT logic family, it operates up to 70 MHz clock frequency with 24 mA output drive capability. Available in a 14-pin SOIC package, this device is ideal for data serialization, LED driving, and parallel port expansion in embedded systems.

Use the download button to access the SN74HC74QDRQ1 schematic symbol, PCB footprint, and 3D model.

The LM7171AIN is a high-speed voltage-feedback operational amplifier from Texas Instruments in an 8-pin DIP package. It delivers 200 V/µs slew rate with 1.5 mV maximum input offset voltage and 104 dB typical CMRR, operating with unity-gain stable design for minimum closed-loop gain of 2. Suitable for video and imaging signal chains.

Inverter 6-Element CMOS 14-Pin SOIC T/R

VQCCN,

Supervisory Circuits Battery-Backup for RAM Retention

The TPS3619-50DGKG4 is a single-channel battery-backup supervisory circuit from Texas Instruments with a 5.0 V threshold for RAM retention. It includes manual reset and operates in an 8-pin TSSOP package. RoHS e4 compliant, available in stock with worldwide shipping.

The TPS65100PWPRG4 is a quad output LCD power supply IC for TFT displays, integrating boost, SEPIC, and inverting converters. It operates from 2.7 V to 5.8 V input and provides regulated positive and negative voltages for LCD bias. Available in a compact 24-pin HTSSOP package with worldwide in-stock supply.

Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC T/R

Automotive 2.25-MHz Fixed VOUT Dual 800mA Step-Down Converter for ADAS Camera applications

Voltage References Precision Micropower Shunt Vltg Ref

Low-Power, RRIO, 750-uV Offset, 1-MHz Operational Amplifier for Cost-Sensitive Systems

Octal Buffer/Driver With 3-State Outputs

Operational Amplifiers - Op Amps Advanced LinCMOS Rail-To-Rail Dual

Logic Gates Quadruple 2-Input Positive-NAND gates

The CD4070BNSRG4 is a quad 2-input XOR gate IC from Texas Instruments in the 4000B CMOS series, packaged in a 14-pin SOP with tape-and-reel (NSR) packaging. It operates over a wide 3V to 15V supply range, provides four independent XOR gates with 50 pF load drive, and features PLASTIC/EPOXY construction. Ideal for parity generation, comparators, and logic level conversion circuits.

The CD4070BF is a quad 2-input XOR (exclusive-OR) gate from Texas Instruments in the CMOS 4000-series logic family. It contains four independent XOR gates operating from 3V to 18V supply with a 50pF load capacitance rating. Available in a 14-pin ceramic DIP package, in stock with worldwide shipping.

The CD54HC365F3A is a 6-channel non-inverting tri-state buffer and line driver from Texas Instruments with dual active-low output enables, housed in a 16-pin ceramic DIP package for high-reliability applications. It operates in the HC/UH high-speed CMOS logic family with 50 pF load capacitance for robust bus driving in military and industrial environments. Available in stock worldwide for data bus buffering and signal isolation applications.

The CD54HCT365F3A is a military-grade hex non-inverting bus driver with dual output enable from Texas Instruments in a 16-pin ceramic DIP package. Operating in the HCT CMOS family with TTL-compatible inputs, it supports unidirectional 3-state bus driving from -55°C to 125°C and is QML qualified for space and defense use.

Flip-Flops Hi Spd CMOS LogDual Pos-Edge-Triggered D

Operational Amplifiers - Op Amps Quad Op Amp

Metering Systems on a Chip - SoC

Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC T/R

LDO Regulator Pos 1.95V 0.2A 6-Pin WSON EP T/R

3.3-V ABT 16-Bit Transparent D-Type Latches With 3-State Outputs

The CD74ACT541M96E4 is an 8-channel non-inverting 3-state CMOS bus driver from Texas Instruments in a 20-pin SOIC package. It features dual active-low output enable inputs, unidirectional data flow, and 5 V ACT CMOS operation for TTL-compatible bus buffering. Available on tape and reel with RoHS compliance.

The CD74ACT541SM96E4 is an 8-channel non-inverting tri-state buffer and line driver from Texas Instruments, built with ACT CMOS logic for TTL-compatible high-speed bus driving in a 20-pin SSOP package. It features dual active-low output enables for flexible 8-bit bus partitioning and delivers 24 mA output sink current with 50 pF load capacitance. Available in stock worldwide for data bus buffering and signal routing applications.

LM386MM-1

The SN74HC4060DRG4 is a 14-bit binary ripple up-counter with integrated oscillator from Texas Instruments, featuring outputs from 10 accessible stages and operating up to 22 MHz in a 16-pin SOIC package. It includes an on-chip RC/crystal oscillator circuit for standalone clock generation without external timing ICs, making it a compact self-clocked divider solution. Available in stock globally for timing, clock division, and delay circuit applications.