Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
41,509
Total Products
126
Categories
All Texas Instruments Components
Showing 17,101–17,150 of 41,509
The CD74HC365MT is a hex non-inverting buffer and line driver from Texas Instruments, belonging to the HC/UH CMOS logic family with dual active-LOW output-enable inputs and unidirectional 6mA output drive capability. It operates from 2V to 6V supply and is packaged in a 16-pin SOIC. Suitable for bus expansion and signal buffering in 3.3V and 5V digital systems.
LDO Regulator Pos 5V 0.25A 8-Pin SOIC T/R
74 Series Transceiver, Non-Inverting 1 1.65V ~ 3.6V TSSOP-20 RoHS
Inverter 6-Element CMOS 14-Pin SOIC Tube
Processor Supervisor 2.93V/1.68V 1.8V/3.3V 8-Pin HVSSOP EP T/R
Operational Amplifiers - Op Amps 1MHz 45uA RRIO Quad Op Amp
Single Channel Single ADC Delta-Sigma 128sps 16-bit Serial 6-Pin SOT-23 T/R
IC DRIVER DOT BAR DISPLAY 18-DIP
1-Channel Single ADC Delta-Sigma 128sps 16-bit Serial 6-Pin SOT-23 T/R
2.95V to 6V, 4A Step-Down Power Module in 9x11x2.8mm QFN Package
High Speed Operational Amplifiers Ultra-Wideband Current Feedback
LDO Regulator Pos 3V 0.5A 8-Pin SOIC Tube
High Speed Operational Amplifiers Ultra-Wideband Current Feedback
Texas Instruments PTMUX1208PWR is a 5 V general-purpose single-ended 8-to-1 analog multiplexer designed for signal routing in industrial and consumer applications. Supports 5 V supply operation with low on-state resistance for accurate analog switching. Available from stock worldwide with competitive pricing.
The DRV8873SPWPRQ1 is an automotive-grade H-bridge DC motor driver in a 24-pin HTSSOP package, rated for 10A peak output current with integrated current sensing and current sense output. AEC-Q100 qualified for automotive applications, it features advanced protection circuitry and enables precise motor torque control in power windows, seat adjusters, and HVAC actuators.
Low-Power, RRIO, 1-MHz, Operational Amplifier for Cost-Sensitive Systems
MSP430G2x33, MSP430G2x03 Mixed Signal Microcontroller
USB Type-C SBU Multiplexer
The PDRV8847SPWR is a 2A dual H-bridge motor driver and stepper motor controller in a TSSOP power package, enabling bidirectional control of two DC motors or one bipolar stepper motor. It features integrated protection circuitry, PWM current control, and a simple logic interface, making it ideal for compact robotics, printers, and consumer automation applications.
LDO Regulator Pos 2.9V 0.1A 5-Pin SOT-23 T/R
The MAX3232EIDBRE4 is a multichannel RS-232 line driver/receiver IC operating from 3 V to 5.5 V supply with Schmitt trigger inputs and EIA/TIA-232-F compliance. Available from Texas Instruments with worldwide shipping.
Buffer/Line Driver 8-CH Non-Inverting 3-ST Bipolar 20-Pin SOIC Tube
Buffer/Line Driver 2-CH Non-Inverting 3-ST CMOS 8-Pin SSOP T/R
Use the download button to access the SN74S1051PW schematic symbol, PCB footprint, and 3D model.
The PUCC21220AD is a 4-A/6-A isolated dual-channel gate driver from Texas Instruments with 3.0-kVRMS isolation, enabling reliable IGBT and MOSFET control. It integrates two independent drive channels in a compact Small Outline Package. Available from stock with worldwide shipping.
Quadruple Bilateral Analog Switch
High-Speed Fully-Differential Amplifiers
Buffer/Line Driver 2-CH Non-Inverting 3-ST CMOS 8-Pin VSSOP T/R
Counter/Divider Single 12-Bit Binary UP 16-Pin CDIP Tube
Very-Low-Power Stereo Codec With DirectPath™ HP Amplifier
The TPS63710 is an inverting step-down DC-DC converter that generates a stable negative output voltage from a positive input supply. It supports output voltages down to -15V with up to 500mA output current and operates from a 2.7V to 5.5V input range, making it ideal for op-amp bias rails, LCD display bias, and MEMS microphone power supply applications.
SP Amp DIFF AMP Single ±7.5V/15V 8-Pin HVSSOP EP T/R
OP Amp Quad GP R-R I/O ±3V/6V 16-Pin SOIC Tube
Interface - I/O Expanders Rem 16B I2C & SMBus I/O Expander
Texas Instruments TLV2455IDRG4 is a quad general-purpose rail-to-rail input/output operational amplifier operating from ±3V to 6V supply in a 16-pin SOIC package. Achieves 80dB typical CMRR, 5nA bias current, and 2mV max offset voltage for precision signal conditioning. Available from authorized distributors with worldwide shipping.
Flip Flops Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear And Preset 14-TSSOP -40 to 125
Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC Tube
The TLV2451CDBVTG4 is a single general-purpose rail-to-rail input/output operational amplifier operating from ±3 V or single 6 V supply. It features 70 dB minimum CMRR, 2 mV maximum input offset voltage, and 5 pA maximum bias current in a 5-pin SOT-23 package. From $0.35 in stock worldwide shipping.
Conv DC-DC 4.5V to 18V Synchronous Step Down Dual-Out 0.68V to 1.95V 5A/5A 36-Pin VQFN EP T/R
The SN65HVD20DG4 is a single-channel RS-485/RS-422 transceiver IC from Texas Instruments with differential Schmitt trigger input and extended common-mode range. It supports data rates up to 10 Mbps, operates from a 3.3 V supply, and features fail-safe open-circuit, short-circuit, and terminated-line receiver outputs. Available from stock worldwide with fast shipping.
Operational Amplifiers - Op Amps Sngl Mcrpwr R-to-R Input/Output Op Amp
LVDS Serializer Automotive 64-Pin VQFN EP T/R
The TLV2451CPE4 is a single-channel, general-purpose rail-to-rail input and output CMOS operational amplifier from Texas Instruments, operating from ±3V to ±6V (or single 6V) supply. It provides 70 dB minimum CMRR, 2 mV maximum input offset voltage, and low bias current of 5 nA. Housed in an 8-pin PDIP through-hole package, it is suitable for low-voltage signal conditioning and sensor interface applications.
SOP-8
Driver 4.5A 2-OUT Lo Side Non-Inv 8-Pin SOIC T/R
Single Channel Single ADC SAR 125ksps 12-bit Parallel 28-Pin PDIP Tube
Interface - I/O Expanders Remote 16-Bit I2C & SMBus I/O Expander
The TPS54872PWPG4 is a voltage-mode PWM synchronous buck switching regulator from Texas Instruments operating from a 4 V to 6 V input supply in a 28-pin SOIC package. It delivers efficient DC-DC step-down conversion with pulse width modulation control for stable output regulation. Available RoHS-compliant with worldwide distribution.
IC SERIALIZER HDMI TO FPD 64VQFN
Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin SOIC Tube
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote