Texas Instruments

Low-Power Single Inverter Buffer/Driver with Open-Drain Outputs

10-Bit FET Bus Switch

32-bit Microcontrollers - MCU Piccolo MCU W/ InstaSPIN-MOTION

Texas Instruments PCA9546A is a 4-channel I2C and SMBus multiplexer with reset pin and 45 Ω on-state resistance in a 16-pin TSSOP package, enabling bus isolation of up to 4 I2C segments. Available from stock with worldwide shipping.

32-bit Microcontrollers - MCU DelfinoG 32-bit MCU with 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash, EMIF, 12b ADC 176-HLQFP -40 to 125

Audio Amplifiers 2W Stereo A

Voltage References Adjustable Precision Zener Shunt Regulator 8-SOIC -40 to 85

TI MPC506APG4 is a 16-channel single-ended CMOS analog multiplexer in 28-pin DIP, with break-before-make switching and ±15V dual supply operation. Industrial -40 to 85°C grade. In stock with worldwide shipping.

TEXAS INSTRUMENTS - PCM1794DB - Digital to Analogue Converter, 24 bit, 192 kSPS, 3 Wire, Serial, 4.75V to 5.25V, SSOP, 28 Pins

The SN74CBT3384CDBQRG4 is a 10-bit CMOS bus switch IC from Texas Instruments with active-low output enable control and 3-state outputs in the CBT/FET bus switch family. It provides near-zero propagation delay, 5 Ω typical on-resistance, and is packaged in a 24-pin SSOP for high-speed bus connectivity applications.

The SN74CBT3861DWRE4 is a 10-bit FET bus switch from Texas Instruments with TTL-compatible inputs and a single active-low enable control. It provides bidirectional, low-resistance signal routing across 10 data lines simultaneously, housed in a 24-pin SOIC package, making it ideal for bus multiplexing and signal isolation in digital systems.

The CD74HC251MG4 is a single 8-input CMOS data selector and multiplexer from Texas Instruments, providing three-state single output with 1-of-8 selection based on a 3-bit address, in a 16-pin SOIC package. It belongs to the HC/UH logic family and supports 4mA output drive with 50pF load capacity. Suitable for bus multiplexing and data routing in low-power CMOS digital designs.

The CD74HC251EG4 is a high-speed CMOS 8-to-1 data selector and multiplexer from Texas Instruments, featuring three-state outputs, a complementary output pair, and operating from 2V to 6V supply in a DIP-16 package. It selects one of eight data inputs based on a 3-bit address with output enable control. Ideal for digital signal routing and data bus selection in CMOS designs.

LMC8101TP is an operational amplifier by Texas Instruments. Key specs include Average Bias Current-Max (IIB): 0.000064 µA; Bias Current-Max (IIB) @25C: 0.000064 µA. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

IC BATT CHG MULTI-CHEM 24TSSOP

Operational Amplifiers - Op Amps Excalibur JFET-Input Hi-Out-Drv uPwr Quad

Battery Management Host-Controlled Mult Chem Batt Charger

Adjustable precision shunt regulator

0.3A 2.7 to 5.5V Dual 2 In/2 Out High-Side MOSFET Switch IC Fault Reporting 2 Act-Hi Enable

Switching Voltage Regulators 5.5-23V 3A Step Down Swift Converter

Conv DC-DC 5.5V to 23V Step Down Single-Out 1.22V to 20V 3A 8-Pin HSOP EP T/R

High Speed Operational Amplifiers Low-Distortion High Speed R-to-R Output

LDO Voltage Regulators High PSRR Fast RF High-Enable 1.5A

Quad JFET-Input High-Output-Drive uPower Operational Amplifier

Use the download button to access the LM5122ZAPWPT schematic symbol, PCB footprint, and 3D model.

Texas Instruments LM2724AM Dual MOSFET Power Driver, 3.2A 8-Pin, SOIC

Encoders, Decoders, Multiplexers & Demultiplexers BCD-To-Decimal Decod er/Driver

CAN Interface IC Fault Protected CAN Transceiver With CAN FD and Wake Input

The SN74S86DRE4 is a quad 2-input exclusive-OR (XOR) gate IC from Texas Instruments in the high-speed Schottky (74S) logic family. It provides four independent XOR gates with 20mA sink current, 15pF load capacitance, and a 5V TTL-compatible supply in a 14-pin SOIC package. Available from stock worldwide with competitive pricing.

32-bit Microcontrollers - MCU DelfinoG 32-bit MCU with 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 1024 KB Flash, EMIF, 12b ADC 100-HTQFP -40 to 125

Configurable Multiple-Function Gate

32-bit Microcontrollers - MCU Piccolo MicroCntlr

Delfino™ 32-bit MCU with 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 1024 KB Flash, EMIF, 12b ADC

Flip-Flops

LDO Voltage Regulators Sgl Output LDO 150mA Dual Level Fixed

SSOP-48

Texas Instruments CD74AC273EE4 is an octal D-type flip-flop with active-low reset in the AC logic family, operating at up to 71 MHz clock frequency with 24 mA output drive in a 20-pin DIP package. Suitable for 8-bit data latching, bus interfacing, and pipeline register applications at 2 V to 6 V supply. From $0.60 in stock with worldwide shipping.

Use the download button to access the SN65LVDS1DR schematic symbol, PCB footprint, and 3D model.

LP324DG4 is a integrated circuit by Texas Instruments for production BOM and repair sourcing. Key specs: 14 pins, 70°C maximum, 16V, 32V. From quote-based pricing, in stock with worldwide shipping support.

The CDC328ADRG4 is a 1:6 low-skew clock buffer IC from Texas Instruments, operating up to 100 MHz and providing six true output copies of a single clock input signal. It features polarity-control inputs enabling combinations of true and complementary outputs, 48 mA output drive, and is housed in a 16-pin SOIC package. Suitable for clock distribution in FPGAs, microprocessors, and high-speed digital system designs.

The CY74FCT244ATPCE4 is an 8-channel non-inverting tri-state bus buffer/line driver in a 20-pin PDIP package. It operates from a 4.5 V to 5.5 V supply, supports up to 64 mA output current, and features TTL-compatible inputs. Available from stock worldwide.

Translation - Voltage Levels 16-Bit Level Shift Xcvr

Switching Controllers Phase Shift Resonant Controller

1-Channel Single ADC Pipelined 125Msps 14-bit Parallel/Serial/LVDS 48-Pin VQFN EP T/R

Texas Instruments PCA9546APWE4 is a 4-channel I2C and SMBus multiplexer/switch IC in a 16-pin TSSOP package with 45Ω maximum on-state resistance. It enables one master to communicate with multiple I2C slave devices sharing the same address, simplifying complex bus architectures in embedded systems.

Use the download button to access the SNJ54HC573AJ schematic symbol and PCB footprint.

Single Inverter

SN74HCT273PWE4 is an octal positive-edge-triggered D flip-flop from Texas Instruments in the HCT CMOS logic family, providing 8 synchronous data storage elements with a common clock and asynchronous active-low reset. The device clocks data at up to 20 MHz with 4 mA output sink current and 50 pF load drive capability. Packaged in a 20-pin TSSOP, it is used for bus-width registers, data storage, and pipeline buffering in 5 V digital systems.

Flip Flops Octal D-Type Flip- Flops

TPS2814PE4 is a dual MOSFET gate driver featuring one inverting and one non-inverting channel with Schmitt trigger inputs, delivering up to 2A peak output current. Requires an 8V to 40V regulator input supply for high-side switching applications. Available from Texas Instruments in DIP-8 package with worldwide distribution.