Texas Instruments

Use the download button to access the DP83869HMRGZT schematic symbol, PCB footprint, and 3D model.

Power Factor Correction - PFC for low-med pwr app w/IEC1000-3-2 cmplnc

Power Factor Correction - PFC for low-med pwr app w/IEC1000-3-2 cmplnc

Hot Swap Voltage Controllers Simple-48V Hot Swap Controller

The TPS731125DBVTG4 is a fixed 2.5 V, 150 mA positive LDO linear regulator from Texas Instruments with an ultra-low 30 mV typical dropout voltage and 1.7 V to 5.5 V input range in a 5-pin SOT-23 package. It delivers 0.01% maximum line regulation for noise-sensitive supply rails. Available RoHS-compliant in tape-and-reel from global authorized distributors.

TPS2HB08BQPWPTQ1 is an AEC-Q100 automotive-grade dual high-side power switch with 8 mΩ on-resistance and integrated diagnostics for 12 V load switching up to several amperes. It provides over-temperature protection and current sensing in a small outline package. Available from stock with worldwide shipping.

CAN Interface IC Automotive Fault Protected CAN Transceiver With Flexible Data-Rate 8-SOIC -55 to 125

Bus Transceivers Octal Bus Trnscvrs With 3-State Outputs

Dual Transmitter/Receiver RS-422/RS-485 16-Pin SOP

Octal Channel Single ADC SAR 25ksps 8-bit Parallel 28-Pin PLCC T/R

Supervisory Circuits Programmable-Delay Supervisory

Use the download button to access the TMUX1109PWR schematic symbol, PCB footprint, and 3D model.

USB Power SW Hi Side/DIST Single 5.5V 2.1A 8-Pin HVSSOP EP Tube

Operational Amplifiers - Op Amps Quad General-Purpose Op Amp

Conv DC-DC 3V to 6V Step Down Single-Out 0.9V to 4.5V 6A 28-Pin HTSSOP EP Tube

24-bit, 1kSPS, 4-ch general-purpose delta-sigma ADC with I2C interface and external Vref inputs

The TPS259827ONRGET is a 15A, 2.7 milliohm smart eFuse by Texas Instruments with accurate load current monitoring and adjustable transient fault management over a 2.7V to 24V input range. It replaces traditional fuses with intelligent protection in a 24-pin QFN package. Available from stock with worldwide shipping.

Texas Instruments 15A, 3m? eFuse with Accurate Current Monitor and Configurable Retry Timers 24-VQFN -40 to 125

PWM Controller with Wide Input Range

The OPA2344PAG4 is a dual-channel, single-supply CMOS operational amplifier from Texas Instruments with a 10 fA maximum bias current, 1200 µV input offset voltage, and 92 dB typical CMRR. It operates from a single supply and is housed in a DIP package for battery-powered precision signal conditioning applications.

The Texas Instruments SN74AHCT573NE4 is an octal D-type transparent latch with 3-state outputs, accepting 5 V TTL-level inputs while operating from a 3.3 V or 5 V supply in the AHCT logic family. Housed in a 20-pin PDIP package with active-low output enable, it drives 8-bit data buses in embedded, industrial, and digital logic systems.

The CD74FCT244ATE is a BiCMOS FCT-family octal buffer and line driver with 3-state outputs in a 20-pin DIP package. It features active-low output enable control and operates at 5 V with a 50 pF load capacitance. Available from stock with worldwide shipping.

The CD74HC4543EE4 is a BCD-to-seven-segment latch, decoder, and driver IC from Texas Instruments in the HC CMOS logic family with configurable output polarity and latched input conditioning. It supports 50 pF load capacitance and drives seven-segment displays directly in a 16-pin DIP package. Available from stock with worldwide shipping.

Digital Signal Processors & Controllers - DSP, DSC Fixed-Point DSP TMS320 Platform

Switching Controllers 2-Ch Multiphase Buck DC/DC w/Int Drvr

Use the download button to access the ISO1410DWR schematic symbol, PCB footprint, and 3D model.

Quad LVDS Receiver with -2 to 4.4V Common-mode Range

Switching Controllers 2-Ch Multiphase Buck DC/DC w/Int Drvr

Conv DC-DC 3V to 6V Step Down Single-Out 0.9V to 4.5V 6A 28-Pin HTSSOP EP T/R

The TPS2013ADRG4 is a single-channel load switch with integrated current limiting from Texas Instruments, operating from 2.7V to 5.5V and supporting up to 600mA continuous output current. It features a fixed current threshold with no external programming, packaged in an 8-pin SOIC for protecting downstream circuits in USB, portable, and embedded power distribution systems.

Single 6.5MHz, 585uA, rail-to-rail I/O CMOS operational amplifier

Conv DC-DC 3V to 6V Step Down Single-Out 0.9V to 4.5V 6A 28-Pin HTSSOP EP T/R

The CD74FCT244ATM96 is a BiCMOS FCT-series octal non-inverting buffer and line driver with 3-state outputs from Texas Instruments in a 20-pin SOIC package. It features active-low output enable, a typical output low voltage of 1V at 5V supply, and 50 pF load capacitance. Available from stock with worldwide shipping.

Operational Amplifiers - Op Amps 6.5MHz 585uA Rail-2-Rail I/O CMOS

The CD4085BEE4 is a dual 2-wide 2-input AND-OR-Invert gate IC from the Texas Instruments 4000-series CMOS family, housed in a 14-pin PDIP package. It provides 2 independent AOI gate elements with 4 total inputs and operates from a wide supply voltage range with 50 pF load capacitance. Available from stock with worldwide shipping.

Digital Signal Processors & Controllers - DSP, DSC Fixed-Pt Dig Signal Proc

Digital Signal Processors & Controllers - DSP, DSC Fixed-Point DSP TMS320 Platform

3.3-V ABT Octal Buffers/Drivers With 3-State Outputs

Digital Signal Processors & Controllers - DSP, DSC Fixed-Point DSP TMS320 Platform

SN74S86DE4 is a quad 2-input XOR gate IC from Texas Instruments in the 74S Schottky TTL family, offering four independent gates in a 14-pin SOIC package. Supports 15 pF load capacitance with 20 mA output sink current capability. Available from stock with worldwide shipping.

Bus Transceivers 3.3-V ABT 16-Bit Bus Trncvr W/3-St Otpt

Latches Tri-State 8-Bit

Operational Amplifiers - Op Amps 36V ZERO-DRIFT QUAD AMPLIFIER

Texas Instruments OPA374AIDG4 is a single rail-to-rail input/output general-purpose op-amp operating from ±2.75V or 5.5V supply, offering 90dB typical CMRR and 10nA maximum bias current in an 8-pin SOIC package. It targets precision low-power signal conditioning. Available in stock with worldwide shipping.

Use the download button to access the TMUX1119DCKR schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps 6.5MHz 585uA Rail-2-Rail I/O CMOS

Single 6.5MHz, 585uA, rail-to-rail I/O CMOS operational amplifier

ISO1500DBQR is a Texas Instruments isolated RS-422/RS-485 line transceiver with differential Schmitt-trigger inputs and differential output, built as a single-function driver in a 16-pin small-outline package for industrial serial communication.

Flip Flops Octal D-Type Flip-Flop w/Clear

TSSOP-20