Texas Instruments

Interface - CODECs Stereo Low Pwr Voice Band Codec

Operational Amplifiers - Op Amps Dual Lo-Pwr JFET-Inp Gen-Purp Op Amp

Analog Comparators Quad Nanopower Push-Pull Comparator

Battery Management Multi-Cell Synch Sw- mode Charger

Use the download button to access the ISO1042BDWVR schematic symbol, PCB footprint, and 3D model.

Switching Controllers Wide Vin Synch Buck DC/DC Contr

Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC Tube

IC 8-BIT SHIFT REGISTER 14-DIP

High accuracy 3.3 V or 5 V digital PWM-output Hall effect sensor family

Operational Amplifiers - Op Amps Single-Supply Rail-to-Rail

Audio Amp Headphone/Speaker 2-CH Stereo/3-CH Stereo 20W Class-D 64-Pin HTQFP EP Tray

SN74HC00 Quadruple 2-Input Positive-NAND Gates

Buffer/Driver 6-CH Inverting Open Collector Bipolar 14-Pin SOP Tube

Use the download button to access the TMUX6119DCNR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the DAC81408RHAT schematic symbol, PCB footprint, and 3D model.

Battery Management 6-Ch Pwr Mgmt IC for Li-Ion Systems

6-channel Power Management IC (PMIC) with 3DC/DCs, 3 LDOs, I2C interface and Dynamic Voltage Scaling

Texas Instruments TPS728330185DRVT, LDO Voltage Regulator, 200mA Adjustable, 0.9 → 3.6 V, 3% 6-Pin, SON

Texas Instruments TPS65198RUYT, Voltage Supervisor 28-Pin, WQFN

3.3V, Full-Duplex RS-485, 12kV IEC ESD, 50Mbps data rate, No Enables

Inverters Dual Schmitt-Trigger Inverter 6-SC70 -40 to 125

Low-Noise, High-Speed, 16-Bit Accurate CMOS Operational Amplifier with digital shutdown

The DAC7541AKPG4 is a 12-bit CMOS 4-quadrant multiplying digital-to-analog converter from Texas Instruments with parallel word input interface. Features 0.0244% max linearity error in an 18-pin DIP package. Available from stock with worldwide shipping.

Digital to Analog Converters - DAC 12-Bit CMOS 4-Quad Multiplying Cnvtr

The DAC7541AKUG4 is a 12-bit CMOS multiplying digital-to-analog converter from Texas Instruments with a 4-quadrant output, parallel word input format, and a maximum linearity error of 0.024%. Housed in an 18-pin SOIC package, it is designed for precision waveform generation, programmable gain, and analog signal synthesis in industrial and instrumentation applications.

Switching Controllers 2.2-MHz wide VIN, 1.5-A MOSFET driver, non-synchronous boost controller 12-WSON -40 to 125

LED DRVR 10Segment 3.3V/5V/9V/12V/15V 6-Pin WSON EP T/R

The TL081IDRG4 is a JFET-input general-purpose operational amplifier from Texas Instruments with 3MHz gain-bandwidth product and ultra-low 0.2nA bias current. It operates on split supplies up to ±18V and delivers 86dB CMRR in the industrial-grade 8-pin SOIC package. Available from stock worldwide with competitive pricing.

OP Amp Dual GP R-R O/P ±3V/6V 8-Pin SOIC Tube

Logic Gates Quadruple 2-Input Pos-NAND Buffer

The TL714CPE4 is a high-speed single voltage comparator from Texas Instruments featuring totem-pole output stage for direct logic interface without external pull-up resistors. It delivers fast response time suitable for precision threshold detection applications and operates over a wide commercial temperature range in an 8-pin DIP package. Well-suited for zero-crossing detection, oscillators, and high-speed signal level conversion in analog-to-digital interface circuits.

The CD74HC174M96 is a hex D-type flip-flop with common reset in the high-speed HC CMOS logic family by Texas Instruments, housed in a 16-pin SOIC package. Key specs: 20 MHz maximum operating frequency, 50 pF load capacitance, 5.2 mA output sink current. Available from stock worldwide with competitive pricing.

Battery Management Fully Integr Sw-Mode One-Cell LiIon Chrgr

Counter ICs Synchronous 4-Bit Binary Counter

The TMS320F28015ZGMA is a 32-bit fixed-point digital signal controller from Texas Instruments based on the C28x CPU core running at up to 100MHz with boundary scan support. It integrates real-time control peripherals for motor control and power conversion with dual 3.3V/1.8V supply requirements in a BGA package. Available from stock worldwide with competitive pricing.

Digital to Analog Converters - DAC 12-Bit CMOS 4-Quad Multiplying Cnvtr

Use the download button to access the ISO1042BQDWVRQ1 schematic symbol, PCB footprint, and 3D model.

LDO Regulator Pos 2.5V 0.4A 5-Pin SOT-23 T/R

Switching Voltage Regulators Low Power Synch Boost Converter

Use the download button to access the ISO1042BQDWVQ1 schematic symbol and PCB footprint.

The TPS76650DG4 is a fixed 5V output, 250mA linear voltage regulator with ultra-low dropout of 0.14V typical. It supports an input voltage range of 5.4V to 10V and comes in an 8-pin SOIC package. Available from Texas Instruments with worldwide shipping.

RF Transceiver FSK/OOK 2.5V/3.3V 48-Pin LQFP T/R

The REG103UA-5G4 is a low-dropout linear voltage regulator with a fixed 5 V output and 500 mA maximum output current. It features a 160 mV typical dropout voltage, 0.16% line regulation, and accepts an input voltage from 5.25 V to 15 V. Housed in an 8-pin SOIC package, it suits precision analog power supplies, DSP core rails, and noise-sensitive measurement instruments.

Texas Instruments SN74S00NG4 is a quad 2-input NAND gate IC from the Schottky TTL logic family, offering propagation delays as low as 3 ns for high-speed digital designs. It operates from a 5 V supply and provides four independent NAND gates in a 14-pin DIP package. Compatible with standard 74S-series logic for legacy and new industrial designs.

TEXAS INSTRUMENTS - TMS320F2801PZS - IC, DSP, 16K FLASH, 100-LQFP

TEXAS INSTRUMENTS - SN74S00D - LOGIC, QUAD 2-IN NAND GATE, 14SOIC

TEXAS INSTRUMENTS - TL16C752BPTR - ASYNC COMM ELEMENT, 3MBPS, LQFP-48

Analog Comparators Dual Nanopower Push-Pull Comparator

Dual Nanopower High-Voltage Comparator

Logic Gates Quad 2-Input Positive-NAND gates