Texas Instruments

Texas Instruments CD74HC4520M96G4 is a dual binary up-counter in the high-speed CMOS HC/UH logic family, supporting both positive and negative edge triggering. It operates with 50 pF load capacitance and offers a 16-pin SOIC package with RoHS e4 lead-free compliance. Available in tape-and-reel (96-unit reel) packaging for automated SMT assembly.

Analog Comparators Dual Low Vltg LinCMOS Differential

Power Management IC (PMIC) for Li-Ion Powered Systems

The CD74HC4520MG4 is a dual 4-bit binary up counter from Texas Instruments in the HC CMOS logic family, operating at up to 20 MHz with 50 pF load in a 16-pin SOIC package. It features synchronous reset and load capability with positive or negative edge triggering. Available in stock with worldwide shipping.

Dual, Low Voltage, LinCMOS™ Differential Comparator

Analog Switch ICs Hi-Speed CMOS Logic Quad Bilat Switch

Digital Signal Processors & Controllers - DSP, DSC Dig Signal Proc

DSP Fixed-Point 16bit 40MHz 40MIPS 100-Pin LQFP

Hall Effect Sensor 5mA Unipolar 1.8V/2.5V/3.3V/5V 3-Pin SOT-23 T/R

Digital Signal Processors & Controllers - DSP, DSC Dig Signal Proc

TEXAS INSTRUMENTS - BQ24157SYFFT - BATTERY CHARGER, LI-ION/LI-POL, DSBGA-20

Use the download button to access the OP27AJGB schematic symbol, PCB footprint, and 3D model.

DRA790BAGCBDQ1 is an AEC-Q100 qualified ARM Cortex-A15 SoC from Texas Instruments running at 300 MHz with integrated DSP, designed for automotive audio amplifier and infotainment applications. Supports -40°C to +125°C operating range and is packaged in a 538-pin FCBGA for high-density automotive PCB integration. Qualified under AEC-Q100 Grade 1 for long-term automotive reliability in body and cockpit electronics.

RS-422/RS-485 Interface IC Dual Diff Driver And Receiver

TLV2464CDRG4 is a quad rail-to-rail operational amplifier from Texas Instruments with 80dB CMRR and 2.2mV maximum input offset voltage for precision signal processing. Voltage-feedback architecture with frequency compensation supports low-power sensor and audio applications. Available in SOIC-14 package with worldwide distribution.

Analog & Digital Crosspoint ICs 2X2 1.5 Gbps LVDS Crosspoint Switch

Texas Instruments TL081IDRE4 is a JFET-input single operational amplifier with a 3 MHz gain-bandwidth product and 86 dB typical CMRR in an 8-pin SOIC package. Its ultra-low bias current of 0.2 nA makes it ideal for high-impedance signal conditioning. Available from stock with worldwide shipping.

Quadruple 2-Input Positive-NOR Gates

Texas Instruments TL714CPG4 is a high-speed differential comparator in an 8-pin DIP package with TTL-compatible outputs and wide supply voltage range. It provides fast response times for threshold detection and window comparator circuits. Available from stock with worldwide shipping.

Video Amp Single 120MHz ±9V 18V 8-Pin SOIC T/R

Regulating Pulse Width Modulator

Analog to Digital Converters - ADC 2.7-5.5V,16B 500KSPS Low Pwr Serial ADC

Low side smart power switch

The SN74CB3Q3253PWG4 is a Texas Instruments dual 4-bit 2:1 CMOS bus switch and multiplexer/demultiplexer with bidirectional data flow, active-low enable control, and 50 pF load capacitance rating in a 16-pin TSSOP package. Competitively priced and in stock with worldwide shipping for digital bus switching designs.

16-bit Ultra-Low-Power Microcontroller, 16KB Flash, 512B RAM, Sigma-Delta ADC, 128 Seg LCD

Analog Switch Single SPST 5-Pin SC-70 T/R

Inverting High-Speed MOSFET Drivers

TLV3011AIDBVTG4 is a low-power analog comparator with open-drain output from Texas Instruments. It features 10 pA input bias current, 12 mV max input offset voltage, and operates in a compact 6-pin SOT-23 package. Available from stock with worldwide shipping.

Use the download button to access the OPA2369AIDGKR schematic symbol, PCB footprint, and 3D model.

Low-capacitance, 1:1 (SPST) 4-channel, powered-off protection switch with 1.8-V logic

Use the download button to access the TMUX1511RSVR schematic symbol, PCB footprint, and 3D model.

Analog Switch ICs 14O Dual SP4T Ana Sw

Texas Instruments UC2705NG4 is a MOSFET power driver IC with 1.5A peak output current in a totem-pole complementary output configuration. Features buffer/inverter-based MOSFET driver interface with standard input characteristics, single-function low-side drive design without high-side capability. Available in through-hole 8-pin PDIP package with RoHS-compliant lead-free construction. In stock worldwide with fast shipping.

Inverter Schmitt Trigger 1-Element CMOS 5-Pin SOT-23 T/R

Multiplexer Switch ICs Dual 1-of-4 FET Mult Demult 2.5V/3.3V

Quadruple Positive-OR Gates With Schmitt-Trigger Inputs

Use the download button to access the TPS72525DCQ schematic symbol, PCB footprint, and 3D model.

2.2MHz wide VIN non-synchronous boost controller

Voltage Level Translator 24-Pin TSSOP Tube

Operational Amplifiers - Op Amps Quad Micropwr Rail-to-Rail

Texas Instruments THVD1429DR is a 3.3 V to 5 V RS-485/RS-422 line transceiver with integrated surge protection and differential Schmitt trigger inputs in an 8-pin SOP package. Compliant with EIA-485-A and TIA-485-A standards for robust half-duplex communications over long cable runs. Available from stock with worldwide shipping.

3.3-V to 5-V RS-485 transceiver with surge protection

Inverter Schmitt Trigger 1-Element CMOS 5-Pin SC-70 T/R

The CD74ACT20M96 is a dual 4-input NAND gate from Texas Instruments, built on ACT CMOS technology and housed in a 14-pin SOIC package. It operates at 5 V, delivers up to 24 mA output sink current per gate, and supports a 50 pF rated load, making it suitable for robust logic interfacing and bus-driving applications.

DSP Fixed-Point 32bit 100MHz 100MIPS 100-Pin LQFP

Switching Voltage Regulators 3-17V 3A SD Cnvrtr

Switch ICs - Various Quad SPDT Hi-BW 10/ 100 Base-T Lan Sw

Switching Controllers 2.2-MHz wide VIN nonsynchronous boost, flyback, & SEPIC controller with hiccup 12-WSON -40 to 125

TL062IPE4 is a dual low-power JFET-input operational amplifier from Texas Instruments with 80 dB minimum CMRR, 0.0002 µA bias current, and 8-pin DIP package. Delivers precision low-noise performance for dual-channel signal applications. Available from stock with worldwide shipping.

Op Amp Quad Low Power Amplifier R-R I/O ±1.8V/3.6V 14-Pin TSSOP Tube