Texas Instruments

Linear Voltage Regulators 1A 5V output linear regulator / LDO in hermetic packages 3-TO 0 to 125

Switching Voltage Regulators Pwr Cnvtr 150KHz 3A SD VTG Reg

Texas Instruments LP2985AIM-2.5 is a fixed 2.5V, 150mA low-dropout linear regulator with enable pin in a 5-SOT-23 package. Supports input voltage up to 16V with a maximum dropout of 575mV and operates from -40°C to 125°C. Available in stock with worldwide shipping at competitive pricing.

Switching Voltage Regulators Automotive 2.2-MHz w ide VIN low IQ synch

TPS7A5701RTER is a 5 A low-dropout LDO voltage regulator by Texas Instruments with low noise and high accuracy. Key specs: 0.7 V–6 V input, 75 mV typical dropout at full load, 16-pin QFN package. Available from stock with worldwide shipping.

Non-Isolated PoL Module DC DC Converter 1 Output 0.69 ~ 3.6V 10A 2.2V - 5.5V Input

Use the download button to access the HDC3021DEHR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LMR51430YDDCR schematic symbol, PCB footprint, and 3D model.

Digital Input Mono Class-D Audio Amplifier With Speaker IV Sense

Texas Instruments THVD1449VDR is a 12 Mbps RS-485/RS-422 transceiver with integrated 4 kV IEC surge protection and wide IO supply range of 1.65 V to 5.5 V. It features a differential Schmitt-trigger receiver input and EIA-485-A/TIA-485-A compliance in an 8-pin SOIC package. Available from stock worldwide with competitive pricing.

TPS3895ADRYT is a single-channel adjustable voltage supervisor and reset IC from Texas Instruments in an ultra-compact 6-pin SOT-23 package. It monitors supply rails with a programmable threshold and asserts a reset output during undervoltage events. Available with RoHS compliance and worldwide in-stock distribution.

SN75LVDS81DGG is a 7-bit parallel-to-serial LVDS line driver with differential Schmitt trigger inputs, EIA-644 compliant, in a 56-pin TSSOP package. Features 4 functions and differential output for noise-immune high-speed serial data transmission. Available from stock worldwide with competitive pricing.

Interface - Signal Buffers, Repeaters Ultra Low Power 10.3 Gbps 2Ch Repeater

Motor / Motion / Ignition Controllers & Drivers 48-V, 1.5-A bipolar stepper motor driver with integrated current sensing & 1/256 microstepping

TLV74330PDQNR is a 300 mA fixed 3.3 V low-dropout LDO regulator by Texas Instruments with ultra-low quiescent current. Key specs: 3.5 V to 5.5 V input, 122 mV typical dropout, 4-pin SOT-23 package. From $0.40, in stock with worldwide shipping.

TMAG5231B1DQDMRR is a low-power omnipolar Hall-effect switch IC from Texas Instruments operating from 1.65 V to 5.5 V with a 1.35 mT hysteresis and 3.8 mT maximum magnetic field range. Housed in a tiny 1.4 mm x 1.1 mm x 0.35 mm plastic package, it suits compact wearable and industrial proximity detection designs. Available from stock with worldwide shipping.

The TLA2021IRUGR is a 12-bit, single-channel delta-sigma ADC from Texas Instruments with a 3.03 µs maximum conversion time and ±6.144 V input range in a 10-pin QFN package. It integrates a programmable gain amplifier and voltage reference. Available from stock with worldwide shipping.

TMUX646NZECR is a 10-channel 2:1 SPDT MIPI analog switch IC by Texas Instruments supporting up to 6 GHz bandwidth in a 36-ball BGA package. Key specs: 10 SPDT channels configurable as 5 differential pairs, 1.8 V logic control, 3.6 V max input voltage. From $2.50, in stock with worldwide shipping.

Use the download button to access the CSD17381F4 schematic symbol, PCB footprint, and 3D model.

DCPA10515DP-U/700 is a miniature 1 W isolated unregulated DC/DC converter by Texas Instruments accepting a 4.5 V to 5.5 V input and delivering dual ±15 V outputs in a 7-SOP package rated to 100°C. Key specs: 1 W output, 86% efficiency, -40°C to +100°C operating range. Available in stock worldwide.

Motor Drives 33V H bridge motor driver with current regulation

Motor / Motion / Ignition Controllers & Drivers Automotive 12-V battery, sensorless sinusoidal control 3-phase BLDC motor driver 24-HTSSOP -40 to 125

Switching Voltage Regulators SIMPLE SWITCHER® 4.5-V to 36-V, 3-A synchronous buck converter with 40-µA IQ

The TPS7B8633DQDDARQ1 is an automotive-grade 500 mA, 40 V ultra-low-IQ LDO linear regulator with power-good output from Texas Instruments in an 8-pin SOIC package, featuring 370 mV typical dropout voltage. Available from stock with worldwide shipping.

TLV840CADL28DBVR is a low-voltage supervisor IC with programmable reset time delay in a compact 5-pin SOT-23 package, operating from -40°C to +125°C. It monitors a single supply rail and asserts a reset output when supply voltage falls below the threshold, with a user-adjustable delay set by an external capacitor. RoHS-compliant (e4), in stock worldwide with fast shipping.

Use the download button to access the LM2904BAIDDFR schematic symbol, PCB footprint, and 3D model.

Battery Management Voltage and temperature protection for 3-s to 16-s cell Li-ion batteries with internal delay timer

ULN2803CDWR is an 8-channel Darlington transistor array peripheral driver by Texas Instruments with open-collector outputs and integrated transient suppression diodes. Key specs: 8 outputs, 500 mA per channel, 20-pin SOIC package. From stock with worldwide shipping.

Use the download button to access the LM2904BTQDRQ1 schematic symbol, PCB footprint, and 3D model.

Cost and Size Optimized, Low Power, 1.8-V to 5.5-V Selectable Gain Instrumentation Amplifier

32-bit Microcontrollers - MCU C2000 32-bit MCU 120-MHz 256-KB flash, FPU, TMU with CLA, CLB, AES and CAN-FD 48-LQFP -40 to 125

Current Sense Amplifiers AEC-Q100, 26-V, 350-kHz current sense amplifier with integrated overcurrent comparator

Encoders, Decoders, Multiplexers & Demultiplexers 3-line to 8-line decoders/demultiplexer 16-WQFN -40 to 125

Switching Voltage Regulators Automotive 6-V to 120-V Wide VIN, 650-mA DC-DC converter with Fly-Buck capability

MOSFET 25-V, N channel NexFET power MOSFET, single SON 3 mm x 3 mm, 4.8 mOhm 8-VSON-CLIP -55 to 150

The TPS566242DRLR is a voltage-mode PWM synchronous buck switching regulator from Texas Instruments designed for 3 V to 16 V input applications. It delivers up to 6 A output current in a compact 6-pin SOT-23 package, optimized for 12 V nominal supply rails. Available in tape-and-reel packaging with worldwide stock and fast shipping.

Texas Instruments UCC14240-Q1 is an AEC-Q100 automotive-grade isolated DC/DC module with an integrated transformer, providing 1.5 W output from a 24 V input with 3-kVRMS isolation. Designed for gate-driver bias supply in EV traction inverters and motor drives.

8-Bit, 30 MSPS ADC SE/Diff Inputs w/ Internal Ref. and Low Power, Powerdown

Digital Isolators Low emissions dual- channel 1/1 reinfo

Gate Drivers 600-V 50-m? GaN FET with integrated driver, protection, temperature reporting and ideal diode mode

Digital Isolators Low-emissions, dual-channel, 1/1, reinforced digital isolator with integrated power

Use the download button to access the LM25149RGYR schematic symbol, PCB footprint, and 3D model.

MOSFETs 30V NCH NexFET MOSFE T A 595-CSD17577Q3A

UCC14240 is an automotive-grade isolated DC/DC power module from Texas Instruments delivering 1.5 W regulated output from a 24 V input with an integrated transformer and 3 kV RMS isolation. It targets gate driver bias supply and isolated auxiliary rail applications in AEC-Q100 automotive systems. Available from stock with worldwide shipping.

TPS63700DRCT is an inverting DC-DC converter by Texas Instruments that generates a regulated negative output voltage from a positive input supply. Key specs: 2.7 V to 5.5 V input range, adjustable -2 V to -15 V output, current-mode PWM control, in a 10-pin MSOP package. Available from stock with worldwide shipping.

TPS51396ARJER is a high-current synchronous buck switching regulator from Texas Instruments delivering up to 8 A output in a 20-pin VFQFN exposed-pad package. Supports 4.5 V to 24 V input with adjustable output from 0.6 V using voltage-mode PWM control. Available from stock with worldwide shipping.

Texas Instruments LM4050QBIM3-2.0/NOPB is an automotive-grade precision 2.048V shunt voltage reference in a 3-pin SOT-23 package with ±0.5% initial accuracy and 15 mA maximum current. AEC-Q100 qualified for -40°C to +125°C operation. Available from stock with worldwide shipping.

The TLV809EF30DBZR is a low-power single-channel voltage supervisor reset IC by Texas Instruments with a 3.0 V threshold and active-low push-pull output. Key specs: -40°C to +125°C operating range, 3-pin SOT-23 package, and manual reset support. Available from competitive pricing, in stock with worldwide shipping.

Switching Voltage Regulators 1A STEP-DOWN VLTG REG

The TMAG5231A1CQDMRR is a low-power Hall-effect omnipolar magnetic switch operating from 1.65 V to 5.5 V. It detects magnetic fields up to 2.7 mT with 0.6 mT hysteresis and fits in an ultra-compact 1.4 mm x 1.1 mm package. Available on tape-and-reel from stock with worldwide shipping.