TPS7B8633DQDDARQ1 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

The TPS7B8633DQDDARQ1 is an automotive-grade 500 mA, 40 V ultra-low-IQ LDO linear regulator with power-good output from Texas Instruments in an 8-pin SOIC package, featuring 370 mV typical dropout voltage. Available from stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
TPS7B8633DQDDARQ1Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
9
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $1.2900(MOQ 10)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 500 mA output current capability with 40 V maximum input and only 370 mV typical dropout voltage for automotive battery-rail applications
  • Ultra-low quiescent current design extends battery life in always-on automotive subsystems such as key-off standby circuits
  • Integrated power-good output flag enables system supervisors to sequence supply rails safely in ADAS and body control designs

Applications

The TPS7B8633DQDDARQ1 is designed for always-on automotive subsystems such as ECU standby circuits, infotainment keep-alive rails, and body control modules that must operate from a 40 V automotive battery with minimal quiescent current drain. Its 500 mA current capacity and power-good output make it suitable for powering microcontrollers, sensors, and CAN transceivers in ADAS and gateway modules. The AEC-Q100 qualified device supports extended -40°C to +125°C temperature operation required for under-hood automotive electronics.

Specifications

Pbfree CodeYes
YTEOL15
AdjustabilityFIXED
Dropout Voltage1-Max0.535V
Dropout Voltage1-Nom0.37V
Input Voltage Absolute-Max42V
Input Voltage-Max40V
Input Voltage-Min4.3V
JESD-30 CodeR-PDSO-G8
JESD-609 Codee4
Line Regulation-Max0.0066%
Load Regulation-Max0.01485%
Number of Functions1
Number of Outputs1
Operating Temperature TJ-Max150°C
Operating Temperature TJ-Min-40 °C
Output Current1-Max0.5A
Output Voltage1-Max3.328V
Output Voltage1-Min3.2719V
Output Voltage1-Nom3.3V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP8,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
Packing MethodTR, 13 INCH
Peak Reflow Temperature (Cel)260
Regulator TypeFIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Screening LevelAEC-Q100
Surface MountYES
TechnologyBICMOS
Terminal FinishNickel/Palladium/Gold (Ni/Pd/Au)
Terminal FormGULL WING
Terminal Pitch1.27mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Voltage Tolerance-Max0.85%
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 2
ECCNEAR99
HTS Code8542.39.00.90
Country of OriginMexico

Datasheet

TPS7B8633DQDDARQ1 Datasheet Download

Official datasheet from Texas Instruments

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the dropout voltage of the TPS7B8633DQDDARQ1 at 500 mA output and why does this matter for 12 V automotive systems?

The TPS7B8633DQDDARQ1 has a typical dropout voltage of 370 mV and a maximum of 535 mV at full 500 mA output load, ensuring the regulator maintains its 3.3 V fixed output even when the 12 V automotive battery drops to approximately 4.3 V minimum input during cold-crank conditions.

How does the TPS7B8633DQDDARQ1 handle load dump transients in automotive applications with 40 V input rating?

The TPS7B8633DQDDARQ1 accepts input voltages up to 40 V continuously (42 V absolute maximum), providing inherent protection against ISO 7637 load dump transients common on 12 V automotive battery rails where transient spikes can reach 40 V, eliminating the need for an external suppressor in most designs.

What does the power-good output on the TPS7B8633DQDDARQ1 enable in multi-rail automotive ECU power sequencing?

The power-good pin on the TPS7B8633DQDDARQ1 asserts a logic signal when the output voltage reaches its regulation target (typically within 5% of 3.3 V), allowing a supervisor IC or MCU to delay enabling downstream supply rails or releasing reset lines until the LDO output is stable, preventing undefined startup states in ADAS processors.

Over what temperature range is the TPS7B8633DQDDARQ1 rated for under-hood automotive installation?

The TPS7B8633DQDDARQ1 is AEC-Q100 qualified and rated for operation from -40°C to +125°C junction temperature, covering both arctic cold-start conditions and the elevated ambient temperatures found near automotive engine compartments and transmission controllers.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
From $1.2900
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
10+$1.7000$17.00
25+$1.5200$38.00
100+$1.4348$143.48
250+$1.3544$338.60
500+$1.3158$657.90
1000+$1.2900$1290.00
pcs
Unit price: $1.7000 · Total: $17.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK