Texas Instruments

Use the download button to access the ISO6762FQDWRQ1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS7333QP schematic symbol, PCB footprint, and 3D model.

Analog to Digital Converters - ADC 24-bit 400-kSPS de lta-sigma ADC with e

TPS7A2018PDQNR is a 300 mA ultra-low-noise, low-IQ LDO linear regulator from Texas Instruments with high PSRR, 2.1 V to 6 V input range, and a maximum 0.2 V dropout voltage. It operates from -40°C to 125°C in a compact 4-pin X2SON package with a line regulation of 0.21%. Available from global stock with fast worldwide shipping.

TPA3245DDV is a 4-channel Class D audio power amplifier with 18 dB fixed gain and 112 dB SNR by Texas Instruments. Key specs: up to 36 V supply, 4 × 30 W output, 44-pin HTSSOP package. From $3.75, in stock with worldwide shipping.

TXU0304QWBQARQ1 is an AEC-Q100 automotive-qualified 4-channel bidirectional voltage level translator operating at up to 200 Mbps in a 14-pin WQFN (3x2.5 mm) package. It features active-high enable control and 5 pF load capacitance for high-speed bus translation. Available from authorized distributors with worldwide shipping.

TLV4041R1 is a general-purpose rail-to-rail comparator with push-pull output in a miniature 4-pin DSBGA package, operating from a 1.8 V to 5.5 V single supply. It offers fast response suitable for battery-powered IoT and wearable designs, with input common-mode voltage extending from ground to VCC. In stock worldwide with competitive pricing and fast shipping.

Use the download button to access the CSD19505KTT schematic symbol and PCB footprint.

Use the download button to access the SN74HCS74BQAR schematic symbol, PCB footprint, and 3D model.

Board Mount Hall Effect / Magnetic Sensors Low power (5 Hz <1u A) low voltage (up

TUSB320HIRWBR is a USB Type-C Configuration Channel (CC) logic controller from Texas Instruments that handles CC pin detection, role negotiation, and I2C status reporting for USB Type-C port implementations without a full PD controller. It supports host, device, and dual-role data operation and is housed in a compact 12-pin WQFN package rated to 260 °C reflow. Available from Texas Instruments with worldwide shipping.

TCAN1463DMTRQ1 is a low-power AEC-Q100-qualified CAN FD transceiver by Texas Instruments featuring signal improvement, inhibit, and local wake functions in a 14-pin VSON package. Key specs: up to 8 Mbps CAN FD data rate, 4.5 V to 5.5 V supply, -40°C to 150°C. From stock with worldwide shipping.

TRS3222IDB is a multichannel RS-232 line driver and receiver supporting 3 V to 5.5 V supply with Schmitt trigger inputs, 2-driver and 2-receiver configuration, EIA-232-F compliant in a 20-pin SOIC package. Available from stock with worldwide shipping.

USB Interface IC USB Type-C Configuration Channel Logic and Port Control 12-X2QFN -40 to 85

Board Mount Hall Effect / Magnetic Sensors Low-power, low-voltage (1.65 V to 5.5 V) Hall-effect switch

Digital Signal Processors & Controllers - DSP, DSC Freon 2.3

Buck Switching Regulator IC Positive Adjustable 1V 1 Output 3A 12-VFQFN

Counter Shift Registers 8-bit shift registers with output registers 16-WQFN -40 to 125

Current Sense Amplifiers AEC-Q100, 40-V, bidirectional, ultraprecise current sense amplifier with picoamp input bias & ENABLE 8-SOT-23-THIN -40 to 125

Gate Drivers Automotive 100-V max simple 3-phase gate driver with bootstrap diodes

Battery Management 0.8-A, one- to six-cell NiMH stand-alone linear charger in a QFN package

Texas Instruments TPS92550TZ/NOPB is a single-channel constant-current buck LED driver supporting up to 450 mA output and 14 W total power in a 7-pin PSSO package. Designed for high-efficiency LED lighting applications with precise current regulation. Available from stock with worldwide shipping.

Texas Instruments TMUX6236RUMR is a dual-channel 2:1 (SPDT) precision analog switch with a 36 V supply range, low on-resistance, and 1.8 V logic control. It features 30 MHz signal bandwidth and latch-up immunity in a 16-pin QFN package. Available from stock worldwide with competitive pricing.

Texas Instruments TPS25830QWRHBRQ1 is an AEC-Q100 automotive USB Type-C and SDP/CDP charge port controller with short-to-BATT protection, supporting 4.5 V to 36 V input and up to 3.5 A output current. Packaged in a 32-pin WQFN for automotive USB charging port designs.

F280037CSPM

Current Sense Amplifiers AEC-Q100, 40-V, bidirectional, high-precision current sense amplifier w/ picoamp input bias & ENABLE

Use the download button to access the OPA627SM schematic symbol, PCB footprint, and 3D model.

Automotive-grade ultralow-noise LDO linear regulator rated at 35 V input and 1 A output, delivering only 4.2 µV RMS output noise for RF and precision analog circuits. AEC-Q100 qualified for automotive and high-reliability applications in a compact QFN package. Available in stock with worldwide shipping.

16-bit Microcontrollers - MCU 16-MHz integrated analog microcontroller with 3.75-KB FRAM, OpAmp, TIA, comparator w/ DAC, 10-bit AD 16-VQFN -40 to 85

Buck Switching Regulator IC Positive Fixed 5V 1 Output 300mA 9-VFQFN

Latches Automotive octal bus transceivers with Schmitt-trigger inputs and 3-state outputs

Voltage References 680-nA quiescent current, 6-ppm/C drift, ultra-low-power precision voltage reference

Buffers & Line Drivers Octal buffers and line drivers with 3-state outputs and Schmitt-trigger inputs 20-VQFN -40 to 125

General Purpose Amplifier 2 Circuit Rail-to-Rail 8-SOIC

TPS22916CNLYFPR is a single-channel load switch from Texas Instruments with 60 mΩ on-resistance, 2 A current capacity, and only 10 nA leakage. Supports 1 V to 5.5 V input with integrated output discharge. From $0.40 in stock with worldwide shipping.

CAN Interface IC Automotive signal improvement CAN FD transceiver with VIO and standby

TXU0102QDCURQ1 is an automotive-grade 2-channel fixed-direction voltage level shifter by Texas Instruments in an 8-pin SOT-23 package. Key specs: unidirectional channels, 5 pF load capacitance, AEC-Q100 qualified with enable-high control. Available in stock with worldwide shipping.

TXU0104QWBQARQ1 is an automotive-grade 4-channel unidirectional voltage level translator by Texas Instruments with 3-state outputs and an 8 ns maximum propagation delay. Key specs: 14-pin QFN package, 12 mA output low current, AEC-Q100 qualified. From $0.85, in stock with worldwide shipping.

LM22678-ADJ is a SIMPLE SWITCHER step-down voltage regulator from Texas Instruments with 4.5 V to 42 V input range and 5 A output current. It features adjustable output voltage, precision enable threshold, and high efficiency switching operation. Available in multiple packages, in stock worldwide with fast shipping.

Counter Shift Registers Automotive 8-bit shift registers with output registers 16-WQFN -40 to 125

The TLE4275QKTTRQ1 is an AEC-Q100 qualified automotive-grade 5 V LDO voltage regulator from Texas Instruments with a typical dropout voltage of 250 mV and input range from 8 V to 42 V. It supports the harsh automotive environment with 45 V absolute maximum input in a 5-pin TO-252 package. Available worldwide with competitive pricing.

Texas Instruments TXBN0304RUTR is a bidirectional 4-channel voltage level translator supporting data rates up to 100 Mbps in a compact 12-UQFN 1.7x2 mm package, enabling seamless logic interfacing between mixed-voltage rails. Ideal for mobile and IoT designs. Available in stock with worldwide shipping.

Texas Instruments TLV9041IDCKR is an ultra-low voltage single-channel operational amplifier operating from 1.2 V with 350 kHz bandwidth and 75 dB minimum CMRR in a 5-pin SOT-23 package. Designed for power-saving applications in battery-powered systems with 12 pA max bias current. Available from stock with worldwide shipping.

The UCC23514EDWVR is a single-channel IGBT/MOSFET gate driver from Texas Instruments with 4.5 A source and 5.3 A sink peak output current for high-side applications. It features standard input logic and SOP-8 packaging for compact power stage layouts. From $1.50, in stock worldwide shipping.

The TLV9022QDGKRQ1 is an automotive-grade precision dual comparator from Texas Instruments with open-drain outputs in an 8-pin SOIC package. It operates from 1.65 V to 5.5 V with 1500 µV maximum input offset voltage and 5 pA bias current. Available from stock with worldwide shipping.

The TPS3760A012DYYR is a 65V overvoltage and undervoltage supervisor from Texas Instruments with adjustable threshold, programmable reset delay, watchdog timer, and ultra-low quiescent current in a 14-pin small outline package. It monitors single-channel supply rails up to 65V with both OV and UV detection, manual reset, and a window watchdog output for robust system supervision. Available in stock globally with lead-free construction and fast worldwide shipping.

Gate Drivers Low-emission 36-V push-pull transformer driver with duty cycle control for isolated power supplies

Board Mount Hall Effect / Magnetic Sensors Auto Analog-Bipolar Hall Effect Sensor

Switching Voltage Regulators Automotive 2.2 MHz wide VIN low IQ synchronous boost controller

Texas Instruments MCT8316A is a sensorless trapezoidal BLDC motor driver with integrated FETs supporting up to 8 A peak phase current and 4.5 V to 35 V supply in a compact QFN package. From $3.50 in stock worldwide shipping.