Texas Instruments

Automotive grade, 1.7V remote and local temp sensor with N-factor, filtering and series-R correction

The TLV1391CDBVRG4 is a single-channel voltage comparator from Texas Instruments featuring an open-collector output, 5mV maximum input offset voltage, and 0.25µA bias current for threshold detection and signal conditioning applications. It operates across commercial temperature range and is packaged in a compact 5-pin SOT-23 for space-constrained circuit designs. Suitable for battery voltage monitoring, analog-to-digital threshold detection, and logic-level conversion in portable and embedded electronic systems.

Enhanced Product 16-Bit Dual-Supply Bus Transceiver w/ configurable translation and 3-state outputs

Analog to Digital Converters - ADC Lo Pwr 12b 125MSPS

Automotive 2.75-V to 6-V, 4-A step-down converter in a 2mm x 3mm wettable-flanks QFN package

MCU 16-bit MSP430 MSP430 RISC 16KB Flash 2.5V/3.3V 64-Pin VQFN EP T/R

Single Channel Single ADC SAR 333ksps 12-bit Parallel 24-Pin SBCDIP Tube

Analog to Digital Converters - ADC Dual 16B 250MSPS ADC

MCU 16-bit MSP430 RISC 16KB Flash 2.5V/3.3V 48-Pin VQFN EP T/R

RS-485 Interface IC

16-bit Microcontrollers - MCU A 595-MSP430F5508IRGCR

MCU 16-bit MSP430 RISC 128KB Flash 2.5V/3.3V 100-Pin LQFP T/R

Voltage Level Translator 6-Pin SC-70 T/R

Metering Systems on a Chip - SoC Ultra low power Micro Controller

MCU 16-bit MSP430 RISC 128KB Flash 2.5V/3.3V 128-Pin LQFP

Metering Systems on a Chip - SoC Ultra low power Micro Controller

Voltage References 10-V Prec Micropower Shunt 1% accuracy

16-bit, 3-MSPS, dual-channel, simultaneous-sampling SAR ADC with internal reference and enhanced SPI

The PPS74511PQWDRVRQ1 is an automotive-grade fixed-output 500 mA low-dropout (LDO) voltage regulator from Texas Instruments with integrated power-good output. It features a typical dropout of 0.4V, input range of 1.5V to 6V, and AEC-Q100 Grade 1 qualification for -40°C to +125°C operation. Housed in a compact 6-pin no-lead SOT package for automotive power management.

The PPS74501PQWDRVRQ1 is an automotive-qualified 500 mA adjustable low-dropout (LDO) regulator from Texas Instruments with power-good output. It achieves a typical dropout voltage of 0.72V at full load and operates across a -40°C to +125°C AEC-Q100 temperature range. Packaged in a compact 6-pin SOT-23-style no-lead (SOT-563) package.

The PLP8867QPWPRQ1 is an automotive-grade 4-channel LED driver IC from Texas Instruments capable of delivering up to 120 mA per channel for high-brightness LED backlight and indicator control. It features I2C interface, PWM dimming, open-load and short detection, and is packaged in a 20-pin TSSOP for automotive interior lighting applications.

The PPS74518PQWDRVRQ1 is an automotive-qualified 500 mA low-dropout (LDO) voltage regulator with power-good output, 2.3V to 6V input range, ultra-low 215 mV dropout, fixed output, and 6-pin SON package for vehicle body electronics. Available in stock with worldwide shipping.

PPS74525PQWDRVRQ1 is an automotive-qualified 500mA low-dropout (LDO) linear regulator with power-good indicator by Texas Instruments, operating from 3V to 6V input in a 6-pin small outline no-lead package. Key specs: 500mA output, 0.16V typical dropout, power-good flag, AEC-Q100 qualified. Available in stock worldwide.

CD74ACT240M96E4 is an octal inverting buffer and line driver with 3-state outputs by Texas Instruments in the ACT logic family, housed in a 20-pin wide SOIC package on tape and reel. Key specs: 8-bit inverting bus driver, active-low output enable, 50pF load capacitance, unidirectional data flow. Available in stock worldwide.

Digital Bus Switch ICs LO VLTG QUAD FETBus Switch

Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 16-Pin CDIP Tube

Voltage References GP51-01110-99,99/03/02 (FCC PSI)

Power Factor Correction - PFC Natural Interleaving Trans-Mode PRC Cntrl

Audio Amp Headphone/Speaker 2-CH Stereo 0.235W Class-AB 24-Pin HTSSOP EP Tube

RS-232 Interface IC 3-5.5V 2 Ch Compat Line Drvr/Rcvr

Power Factor Correction - PFC Interleaved Trans Mode PFC

The SN74HCS74QPWRQ1 is an automotive-qualified dual D-type positive-edge-triggered flip-flop with Schmitt-trigger inputs, clear, and preset, from Texas Instruments. It supports operating frequencies up to 45 MHz and supply voltages of 2 V to 5.5 V. Packaged in a 14-pin TSSOP, it is AEC-Q100 qualified for automotive applications.

Buffers & Line Drivers 16B Buffers And Line Drivers

Bus Transceivers

Battery Charger Li-Ion 2500mA 3.5V to 4.44V 49-Pin DSBGA T/R

Use the download button to access the SN5417J schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - UCC2800DG4 . - PWM Controller, 10V-0V supply, 1 MHz, 5.075V/1A out, SOIC-8

Texas Instruments LM3S9B92 is a 32-bit ARM Cortex-M3 microcontroller operating at up to 80 MHz with 256 KB flash, integrated USB, Ethernet MAC/PHY, and rich analog peripherals. Available in BGA-108 package with extended temperature support.

NAND Gate 2-Element 2-IN CMOS 8-Pin SSOP

Use the download button to access the PCA9518PWT schematic symbol, PCB footprint, and 3D model.

Interface - I/O Expanders Expandable 5-Ch I2C Hub

LDO Voltage Regulators

Switching Controllers Lw P BiCMOS PWM

RS-232 Interface IC 3 to 5V Multichannel RS-232 Line Drv/Rcvr

Translation - Voltage Levels 16B Dual-Supply Bus Xceiver

RS-232 Interface IC 3 to 5V Multichannel RS-232 Line Drv/Rcvr

Switching Voltage Regulators Reg 5V Hi-Eff Charge Pump DC/DC Converter

Logic Gates Quad Positive-NAND Gate

Texas Instruments TPS60132PWPG4, Charge Pump Step Up, 5 V, 20-Pin, HTSSOP

Bus XCVR Single 8-CH 3-ST 20-Pin TSSOP T/R