Texas Instruments

TEXAS INSTRUMENTS - DS3487M. - Line Driver RS422, 4 Drivers, Tri-State, 4.75V-5.25V supply, SOIC-16

The XOPA2834IDGKT is an ultra-low-power dual operational amplifier from Texas Instruments with 50 MHz gain-bandwidth product and rail-to-rail output swing. It features negative rail input capability, 104 dB typical CMRR, and voltage-feedback architecture, packaged in a small MSOP-8 package for space-efficient precision signal conditioning.

The PTLIN1021DRBRQ1 is an automotive-grade LIN transceiver compliant with ISO 17987-4.2, featuring WAKE and INH pins for low-power network management. It operates from 5 V to 27 V and supports data rates up to 20 kbps. Available in an 8-pin SON package from Texas Instruments, in stock with worldwide shipping.

The SN74ALS153DR is a dual 4-to-1 data selector/multiplexer IC from Texas Instruments' Advanced Low-power Schottky (ALS) logic family. It selects one of four data inputs per channel using two common address inputs, with individual active-low enable pins per channel. Available in a 16-pin SOIC package with tape-and-reel packaging for automated production assembly.

Precision Amplifiers Quad Precision Lo-Pwr Single Supply

Bus Transceivers Octal Bus Trnscvr With 3-State Outputs

36-V, Low Noise(4nV/√Hz), Wide-Bandwidth(25MHz), Precision Rail-to-Rail In/Out Operational Amplifier

Switching Controllers Wide Input Sync Buck Cntrlr source/sink

Temp Sensor Digital Serial (2-Wire, I2C) Automotive 8-Pin SOIC Tube

Encoders, Decoders, Multiplexers & Demultiplexers Data Selectors Multiplexers

The PS7A0527PDBZR is an ultra-low quiescent current LDO regulator from Texas Instruments, delivering 200 mA output with only 1 µA IQ and up to 5.5 V input in a tiny 3-pin SOT-23 package for battery-powered designs.

The PPS74601PQWDRVRQ1 is an automotive-grade adjustable 1 A low-dropout LDO linear regulator with a power-good output, qualified for AEC-Q100. It features a maximum dropout voltage of 1.09 V and operates up to 150 °C junction temperature. Packaged in a 6-pin SOT-23 for compact automotive power supply designs with worldwide availability.

The PS7A0522PDBZR is an ultra-low quiescent current (1 µA typical) 200 mA fixed-output LDO regulator with a maximum dropout voltage of 382 mV and input range of 2.7 V to 5.5 V. It delivers excellent line regulation of 0.018% and load regulation of 0.062% in a compact 3-pin SOT-23 package. Available from stock worldwide with fast shipping.

Battery Management Fully Int Sw Mode 1-Cell Li-Ion Chrgr

The PUCC256404DDB is an LLC resonant controller IC from Texas Instruments featuring ultra-low power standby, high-voltage startup, and a 13 V to 26 V input range. In a 14-pin SOIC package, it is optimized for high-efficiency server power supplies and telecom power conversion designs.

Battery Management Fully Int Sw Mode 1-Cell Li-Ion Chrgr

Texas Instruments PDRV8436PWPR is a 48V, 1.5A bipolar stepper motor driver with integrated current sensing and 1/256 microstepping in a 24-pin HTSSOP package with exposed thermal slug. It delivers smooth, low-noise motor control for precision motion applications in industrial and robotics systems available with worldwide distribution.

Serializers & Deserializers - Serdes A 595-SN65LVDS93BDGG

Battery Management Fully Int Sw-Mode 1 Cell Li-Ion Chrgr

QFN-28

The TPS74501PDRVT is a high-performance 1A LDO linear regulator from Texas Instruments. Features adjustable output voltage with ultra-low 95mV typical dropout, 1.5V to 6V input range, and excellent PSRR. Available in compact 6-pin SOT-23 package for space-constrained designs.

TLV61048DBVR is a current-mode PWM boost converter from Texas Instruments operating from 2.65 V to 5.5 V input in a compact SOT-23-6 package. It delivers up to 1 A switch current with programmable output voltage and up to 1 MHz switching frequency. Available in stock worldwide with fast shipping.

Conv DC-DC 4.2V to 60V Synchronous Step Down Single-Out 3.3V 1.5A Automotive 12-Pin VQFN-HR T/R

Encoders, Decoders, Multiplexers & Demultiplexers Quad 2-to-1 Data Slct/Mltpx W/3St Otp

TLE2074AMJ is a quad wideband operational amplifier from Texas Instruments with ±19V supply in ceramic 14-pin DIP package. Features 78dB minimum CMRR, 0.175nA bias current, and voltage-feedback architecture with frequency compensation. Available from stock worldwide with competitive pricing.

LDO Regulator Pos 1.2V to 9.75V 0.5A 20-Pin TSSOP Tube

LVDS Deserializer 4160Mbps Automotive 64-Pin VQFN EP T/R

Logic Gates Dual 4-input Positive-NAND Schmitt triggers 14-PDIP 0 to 70

The LM3S9B96-IBZ80-C5 is a 32-bit ARM Cortex-M3 Stellaris microcontroller from Texas Instruments running at up to 80 MHz with ADC, DMA, boundary scan, and 3.3 V I/O in a 108-pin BGA package. It targets advanced connectivity and control applications requiring high peripheral integration. Available from stock worldwide with fast shipping.

Logic Gates Dual 4-Input Positive-AND Gate

ARM Microcontrollers - MCU Stellaris Micro

ARM Microcontrollers - MCU Stellaris Micro controller

LQFP-100

The LM3S9B96-IBZ80-C5T is a 32-bit ARM Cortex-M3 microcontroller from Texas Instruments, featuring a 25 MHz maximum clock, integrated ADC, DMA channels, boundary scan support, and a 108-pin NFBGA package for embedded control applications.

LM3S9B92-IBZ80-C5 is a 32-bit ARM Cortex-M3 microcontroller running up to 80 MHz with integrated ADC, DMA, and multiple communication peripherals in a 108-pin BGA package, targeting industrial control and networking applications. From $12.00, in stock, worldwide shipping.

I2C Controlled, 2-cell, 2-A boost-mode battery charger with cell balancing

The LM3S9B92-IQC80T is a 32-bit ARM Cortex-M3 microcontroller from Texas Instruments running up to 80 MHz with rich connectivity peripherals. It integrates USB, Ethernet MAC/PHY, CAN, and multiple serial interfaces in a quad flat package. Designed for industrial control, automation, and connected embedded applications requiring high performance.

Texas Instruments LM3S9B92-IQC80-C5T is a 32-bit ARM Cortex-M3 Stellaris microcontroller in a 100-pin LQFP package, featuring 16.384 MHz max clock, 65 I/O lines, integrated ADC, DMA, and JTAG boundary scan for industrial control and connected embedded applications.

TLC556MDRG4 is a dual LinCMOS low-power timer IC with two independent timing channels. It operates up to 1.2 MHz output frequency and supports 15 V nominal supply for versatile pulse generation. Housed in a 14-pin SOP package for space-efficient PCB assembly.

Use the download button to access the RM48L530DPGET schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - TPS72711YFFT - Fixed LDO Voltage Regulator, 2V to 5.5V, 162.5mV Dropout, 1.1Vout, 250mAout, DSBGA-4

Use the download button to access the RM46L430CPGET schematic symbol, PCB footprint, and 3D model.

TPS40021PWPRG4 is a synchronous buck controller from Texas Instruments supporting voltage-mode PWM control with a 2.25 V to 5.5 V input range. It drives external N-channel MOSFETs and can deliver output currents limited only by the external FETs, making it suitable for high-current DC-DC conversion. Available in a 16-pin TSSOP package, in stock worldwide with fast shipping.

LDO Voltage Regulators L-N H-B PSRR 150mA

LDO Voltage Regulators Sgl Output LDO 150mA Fixed Hi PSRR

Texas Instruments TPS40020PWPG4 is a voltage-mode PWM buck controller operating from 2.25 V to 5.5 V input for step-down DC-DC conversion. The 16-pin HTSSOP package integrates gate drivers and protection features for compact point-of-load power supplies.

LM5180NGUT is a primary-side regulated flyback converter controller from Texas Instruments with an integrated 100V, 1.5A power MOSFET and input voltage range of 4.5V to 65V. It operates in current-mode control and is housed in a compact 8-pin WSON package rated to 150°C.

Switching Controllers Enhanced Low Input

65-VIN PSR flyback converter with 100-V, 1.5-A integrated power MOSFET

Automotive 42-VIN PSR flyback converter with 65-V, 1.5-A integrated power MOSFET