Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
34,737
Total Products
97
Categories
All Texas Instruments Components
Showing 10,851–10,900 of 34,737
Buffers & Line Drivers 16-Bit Buffer/Driver With 3-State Outputs
Clock Buffer Low Jitter Dual 1:6 Univ-to-LVPECL Bfr
Digital to Analog Converters - DAC Dual 12-Bit 40MSPS
Translation - Voltage Levels 16-Bit Level Shift Xcvr
IC BUF NON-INVERT 5.25V 20SOIC
Buffers & Line Drivers 16-Bit Buffer/Driver With 3-State Outputs
The CY74FCT244ATSOCTE4 is an 8-channel non-inverting 3-state CMOS buffer and line driver from Texas Instruments in the FCT logic family. It features two active-low output enable inputs, 64 mA output sink current, and operates at 5 V in a 20-pin SOIC package for high-drive bus buffering applications.
Analog Switch ICs SNGL Pole Doubl Thrw Analog SWCH
IC MCU 16BIT 32KB FLASH 64VQFN
Voltage References
Use the download button to access the SN74AUP1G80DCKTG4 schematic symbol, PCB footprint, and 3D model.
Octal Buffers/Drivers With 3-State Outputs
3.3-V ABT Octal Buffers/Drivers With 3-State Outputs
Bus Transceivers 16-Bit Bus Trnscvrs With 3-State Outputs
Op Amp Dual Low Noise Amplifier R-R I/O ±3V/6V Automotive 8-Pin SOIC T/R
RS-232 Interface IC Quad Line Driver/LIN
The LT1013DIPE4 is a dual precision operational amplifier from Texas Instruments in an 8-pin DIP package. It delivers 300 µV maximum input offset voltage, 97 dB minimum CMRR, and 30 nA bias current, suitable for precision measurement and industrial instrumentation. Available for worldwide shipping with lead-free compliance.
Use the download button to access the SN74AUP1G80DCKRG4 schematic symbol, PCB footprint, and 3D model.
Octal Bus Transceivers
The TLV2262AIDRG4 is a dual rail-to-rail input/output operational amplifier from Texas Instruments in an 8-pin SOIC package. It features 1.5 mV maximum input offset voltage, 65 dB minimum CMRR, and a voltage-feedback architecture, operating across the industrial temperature range. Stocked worldwide for immediate shipment.
The CD4056BMG4 is a CMOS BCD-to-7-segment LCD decoder and driver IC from Texas Instruments. It accepts parallel BCD input and drives all seven LCD segment lines directly, supports non-multiplexed display operation, and operates from 3 V to 15 V in a 16-pin SOIC package for low-power LCD display applications.
Bus Transceivers 20-Bit Bus Trnscvrs With 3-State Outputs
Buffers & Line Drivers Octal Buffers And Line Drivers With 3-State Outputs 20-TSSOP -40 to 85
Op Amp Quad High Output Current Amplifier R-R O/P ±3V/6V 14-Pin TSSOP T/R
Operational Amplifiers - Op Amps Quad 2.7-V High-Slew Rate R-To-R Output
Logic Gates Quadruple 2-Input Positive-NOR Gate
CAN Interface IC Automotive Fault Protected CAN Transceiver With Flexible Data-Rate 8-SON -55 to 125
Bus Transceivers 16B Bus Transceiver
DIP-8
The CD74HC174M96E4 is a high-speed CMOS hex D-type flip-flop with master reset from Texas Instruments in a 16-pin SOIC package. It features six independent D flip-flops clocked simultaneously, operating at up to 20 MHz with a 5.2 mA output drive, making it suitable for parallel data storage and pipeline registers.
Switching Controllers Prgmb Max Duty Cycle PWM Controller
Switching Controllers Programmable Maximum Duty Cycle
Adjustable and fixed 1-A 16-V positive-voltage low-dropout (LDO) linear regulator
The LM3812M-1.0 is a single-channel battery gauge IC from Texas Instruments in a Small Outline 8-pin package. It monitors battery charge level with a fixed threshold and provides a single output channel. Available from stock with worldwide shipping.
The MM5453N is a liquid crystal display driver integrated circuit from Texas Instruments supporting 33-segment, 4-digit serial interface LCD driving. It operates in segment display mode without multiplexing capability and comes in a DIP-40 package. Available in stock with worldwide shipping.
Logic Gates A 595-SN74ALS08NSR
32-bit Microcontrollers - MCU PiccoloG 32-bit MCU with 100 MHz, FPU, TMU, 128 KB Flash, InstaSPIN-FOC, CLB, PGAs, SDFM 64-LQFP -40 to 125
SOIC-8
MCU 32-bit Tiva C ARM Cortex M4F RISC 256KB Flash 1.2V/3.3V 144-Pin LQFP T/R
Buffers & Line Drivers Octal Buffer/Driver With 3-State Outputs
Operational Amplifiers - Op Amps Quad MicroPwr RRIO
Conv DC-DC 2.3V to 4.85V Step Up Single-Out 2.85V to 4.4V 16-Pin DSBGA T/R
Bus Switch 2-Element CMOS 8-IN 20-Pin TSSOP T/R
Sensor Interface Sensor Signal Conditioning
Texas Instruments LF347BNE4 is a quad general-purpose JFET-input operational amplifier operating on ±18 V supply rails. Features 100 dB typical CMRR, 0.0002 µA ultra-low bias current, and internal frequency compensation in a 14-pin PDIP package. Available from stock with worldwide shipping.
Analog & Digital Crosspoint ICs 2x2 LVPECL Output Crosspoint Switch
The CD4022BPWRE4 is a CMOS octal Johnson counter and divider from Texas Instruments, providing eight decoded output lines sequentially activated by clock pulses in a ring counter configuration. It operates from 3V to 15V supply with a maximum clock frequency of 2.5 MHz and features a carry output for cascading multiple counters. Housed in a 16-pin TSSOP on tape and reel, it is suitable for timing, sequencing, and frequency division applications.
LDO Voltage Regulators NRND, alternate is LM2936MX-5.0/NOPB
Operational Amplifiers - Op Amps Low Cost FET-Input Oper Amplifier
Clock Generator 0MHz to 2.2GHz Input 1500MHz Output 48-Pin VQFN EP T/R
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote