Texas Instruments

The CD74HC251EG4 is a high-speed CMOS 8-to-1 data selector and multiplexer from Texas Instruments, featuring three-state outputs, a complementary output pair, and operating from 2V to 6V supply in a DIP-16 package. It selects one of eight data inputs based on a 3-bit address with output enable control. Ideal for digital signal routing and data bus selection in CMOS designs.

IC BATT CHG MULTI-CHEM 24TSSOP

Operational Amplifiers - Op Amps Excalibur JFET-Input Hi-Out-Drv uPwr Quad

Battery Management Host-Controlled Mult Chem Batt Charger

Adjustable precision shunt regulator

0.3A 2.7 to 5.5V Dual 2 In/2 Out High-Side MOSFET Switch IC Fault Reporting 2 Act-Hi Enable

Switching Voltage Regulators 5.5-23V 3A Step Down Swift Converter

Conv DC-DC 5.5V to 23V Step Down Single-Out 1.22V to 20V 3A 8-Pin HSOP EP T/R

High Speed Operational Amplifiers Low-Distortion High Speed R-to-R Output

LDO Voltage Regulators High PSRR Fast RF High-Enable 1.5A

Quad JFET-Input High-Output-Drive uPower Operational Amplifier

Use the download button to access the LM5122ZAPWPT schematic symbol, PCB footprint, and 3D model.

Texas Instruments LM2724AM Dual MOSFET Power Driver, 3.2A 8-Pin, SOIC

Encoders, Decoders, Multiplexers & Demultiplexers BCD-To-Decimal Decod er/Driver

CAN Interface IC Fault Protected CAN Transceiver With CAN FD and Wake Input

Configurable Multiple-Function Gate

32-bit Microcontrollers - MCU Piccolo MicroCntlr

Delfino™ 32-bit MCU with 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 1024 KB Flash, EMIF, 12b ADC

Flip-Flops

LDO Voltage Regulators Sgl Output LDO 150mA Dual Level Fixed

SSOP-48

Use the download button to access the SN65LVDS1DR schematic symbol, PCB footprint, and 3D model.

The CDC328ADRG4 is a 1:6 low-skew clock buffer IC from Texas Instruments, operating up to 100 MHz and providing six true output copies of a single clock input signal. It features polarity-control inputs enabling combinations of true and complementary outputs, 48 mA output drive, and is housed in a 16-pin SOIC package. Suitable for clock distribution in FPGAs, microprocessors, and high-speed digital system designs.

Translation - Voltage Levels 16-Bit Level Shift Xcvr

Switching Controllers Phase Shift Resonant Controller

1-Channel Single ADC Pipelined 125Msps 14-bit Parallel/Serial/LVDS 48-Pin VQFN EP T/R

Use the download button to access the SNJ54HC573AJ schematic symbol and PCB footprint.

Single Inverter

Flip Flops Octal D-Type Flip- Flops

TPS2814PE4 is a dual MOSFET gate driver featuring one inverting and one non-inverting channel with Schmitt trigger inputs, delivering up to 2A peak output current. Requires an 8V to 40V regulator input supply for high-side switching applications. Available from Texas Instruments in DIP-8 package with worldwide distribution.

106-dB SNR stereo digital-to-analog converter (DAC) (software control)

Use the download button to access the DRV8876PWPR schematic symbol, PCB footprint, and 3D model.

The PDRV8876PWPR is a 37V, 3.5A brushed DC motor driver from Texas Instruments with a half-bridge architecture, integrated current sensing, and a dedicated current sense output. Operating from 4.5V to 37V supply voltage, it comes in a 16-pin thin shrink small outline package with a heat sink slug, enabling efficient motor control in automotive and industrial designs.

10-MHz, low-noise, RRIO, CMOS operational amplifier for cost-sensitive systems

MCU 32-bit C28x RISC 256KB Flash 3.3V 100-Pin LQFP Tray

RF Microcontrollers - MCU Ultralow-Pwr MCU SOC

Adjustable Inverting DC/DC Converter

SOC MSP430 48-Pin VQFN EP T/R

The TPS6755IDR is an inverting DC-DC switching regulator from Texas Instruments that converts a 2.7V to 9V input into a regulated -4.75V to -5.25V negative output at up to 270mA. It uses current-mode PWM control and is housed in a compact 8-pin SOIC package, ideal for generating negative supply rails in portable and battery-powered equipment.

The Texas Instruments BQ2005SG4 is a fast charge management IC designed for NiCd and NiMH dual battery applications, supporting up to 2000mA charge current with PWM current-mode control. It operates from a 4.5V to 5.5V supply and integrates dual battery fast charger functionality in a 20-pin SOIC package. This device streamlines portable device charging design by providing complete charge management in a compact, easy-to-integrate solution.

TEXAS INSTRUMENTS - TPS6755IP - IC, DC/DC INVERTER 200MA 5V, 6755I

Fast Charge Management NiCD/NiMH 2000mA 20-Pin SOIC T/R

Enhanced Product 3-V To 6-V, 3-A Output Synchronous-Buck Pwm Switcher W/Integrated Fets

PLASTIC, DIP-8

High frequency Dual Synchronous Rectifier Controller for LLC Converter

Motor/Motion/Ignition Controllers & Drivers Temp Monitoring and Fan Ctrl

Buffers & Line Drivers Octal Buff/Line Drvr W/3-State Otpt

Clock Drivers & Distribution 1-To-6 Clock Driver

4-Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and 3-State Outputs

The DAC2932PFBTG4 is a dual-channel 12-bit digital-to-analog converter from Texas Instruments supporting serial, parallel, and word input formats with 2's complement binary encoding. It features a TQFP-48 surface-mount package with 0.8V maximum analog output voltage and 0.1953% linearity error for precision analog signal generation. Available in stock globally for audio, instrumentation, and industrial control applications.