Texas Instruments

Automotive Catalog Single Schmitt-Trigger Buffer

Automotive 10W Analog input Mono Class D Amplifier with SpeakerGuard™

Gate Drivers 4-A, 6-A, 5.7-kVRMS Isolated Dual-Channel Gate Driver with Enable 16-SOIC -40 to 125

SM72445MT/NOPB is a programmable Maximum Power Point Tracking (MPPT) controller with 8-channel analog inputs and adjustable PWM frequency for solar energy harvesting. Operates from a 4.75 V to 5.25 V supply. Available from stock worldwide at competitive pricing.

3-pin or 8-pin 100-mA adjustable positive regulator

Use the download button to access the MUX508ID schematic symbol, PCB footprint, and 3D model.

16-Bit, 128SPS, 1-Ch Delta-Sigma ADC w/ PGA, Oscillator & I2C

Use the download button to access the LM239AQDRQ1 schematic symbol, PCB footprint, and 3D model.

Automotive Precision, Low Noise, Low Iq Operational Amplifier

75-W 2.1-MHz Digital Input 4-Channel Automotive Class-D Audio Amplifier

600kHz/1.3MHz Step-up PWM DC/DC Converter

Use the download button to access the PCM2903CDB schematic symbol, PCB footprint, and 3D model.

400-Mbps LVDS quad high-speed differential driver

12-Channel, 16-Bit, ES-PWM RGB LED Driver with 3.3V Linear Regulator and Watchdog Timer

Use the download button to access the LMK61E2BAA-SIAT schematic symbol, PCB footprint, and 3D model.

The TXB0101DRLTG4 is a Texas Instruments 1-bit bidirectional voltage-level translator in a 6-pin SOT-23 package with 14.2 ns maximum propagation delay and open-drain output. It automatically senses signal direction and translates logic levels between different supply voltage domains without direction control pins. Available worldwide in stock for mixed-voltage interface designs in portable and embedded systems.

Digital Isolators Quad Ch 3/1 1Mbps Dig Iso

Delfino™ 32-bit MCU with 150 MIPS, FPU, 512 KB Flash, EMIF, 12b ADC

16-Bit 2.5-V to 3.3-V/3.3-V To 5-V Level Shifting Transceiver With 3-State Outputs

Wide Input 65V, 2A Synchronous Buck / Fly-Buck™ Converter

Use the download button to access the TPS75633KTTT schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - OPA374AIDBVTG4 . - OP AMP, CMOS 6.5MHZ RRI/O, SOT-23-5

18V, 12A, 3mΩ eFuse with IMON and PG

1% low-voltage wide-operating current adjustable precision shunt regulator

Automotive Qualified Precision, Zero-Crossover, 20MHz, 0.9pA Ib, RRIO, CMOS Operational Amplifier

17V Input, 3A Synchronous Step-Down Regulator in SOT-23 With Power-good and Soft-start

100-ppm/°C precision micropower shunt voltage reference

Current Mode PWM Controller

PRECISION INSTRUMENTATION AMP

Digital Isolators

Use the download button to access the DAC82001DRXR schematic symbol, PCB footprint, and 3D model.

The TPS7A1601ADGNR is a 60 V, 100 mA adjustable LDO linear regulator with only 5 µA quiescent current, power good output, and enable pin. Ideal for battery-powered and industrial applications requiring wide input range with minimal standby power. Available in an 8-pin MSOP package from Texas Instruments.

DLP7000BFLP is a Texas Instruments 0.7-inch XGA Digital Micromirror Device (DMD) supporting dual LVDS Type-A 3G inputs with peak wavelength at 700 nm and 3.6 V max supply. Available in stock with competitive pricing and worldwide shipping.

Texas Instruments

The TPS48111LQDGXRQ1 is a single-channel high-side power and current monitor IC from Texas Instruments with an adjustable threshold, packaged in a 19-lead TSSOP for automotive-grade (Q1) power monitoring and overcurrent protection designs.

Analog to Digital Converters - ADC Automotive, six-channel, 24-bit, 32-kSPS, simultaneous-sampling, delta-sigma ADC

USB Interface IC

Analog to Digital Converters - ADC Automotive, eight-channel, 24-bit, 32-kSPS, simultaneous-sampling, delta-sigma ADC

Dual 5A Compound Gate Driver

Texas Instruments TPS7H2221MDCKTSEP is a radiation-tolerant single-channel load switch IC supporting 1.6 V to 5.5 V input voltage and up to 1.25 A load current in a compact SOT-23-6 package. Designed for space and harsh-environment applications with adjustable threshold control. Available from stock worldwide with fast shipping.

32-bit Microcontrollers - MCU

Operational Amplifiers - Op Amps Automotive, quad, 40-V, 4.5-MHz, low-power operational amplifier

Op Amp Single High Speed Amplifier ±18V/36V 6-Pin(5+Tab) DDPAK T/R , -40°C ~ 85°C

Use the download button to access the INA241A1IDDFR schematic symbol, PCB footprint, and 3D model.

Analog Comparators Dual micropower high-voltage comparator

4-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation and 3-State Outputs

Use the download button to access the TPS62933FDRLR schematic symbol, PCB footprint, and 3D model.

Voltage References 650-nA quiescent current, 12-ppm/C drift, ultra-low-power precision voltage reference

BQ25628RYKR is a single-cell linear battery charger IC with boost mode and integrated ADC, supporting a 3.9 V to 18 V input range and 2 A charge current. From $1.45, in stock worldwide shipping.

Texas Instruments TPS629203DRLR is a PWM/PFM step-down switching regulator accepting 3 V to 17 V input in an 8-pin SOT flat-lead package for space-constrained power designs. Available from stock with worldwide shipping.