Microchip

9 X 9 MM, 0.90 MM HEIGHT, LEAD FREE, PLASTIC, QFN-64

MICROCHIP - MIC5504-3.3YM5-TR - LDO VOLT REG, 0.3A, 3.3V, SOT-23-5

The PIC16F1788-I/SS is an 8-bit PIC16 microcontroller from Microchip with 28 KB Flash, 2 KB RAM, 32 MHz maximum clock, integrated ADC, DAC, and SSOP-28 package, featuring low-voltage operation down to 2.3 V at 16 MHz for mixed-signal embedded control and sensor interface designs.

Microchip DSPIC30F6010-30I/PF is a 16-bit digital signal controller with 40 MHz max clock, 144 KB flash, and 8 KB SRAM. It operates at 2.5 V minimum and provides UART, SPI, and I2C interfaces in an 80-pin TQFP package. Available in stock worldwide with factory-direct shipping.

The PIC16F1788-I/SO is an 8-bit PIC16 microcontroller with 28 KB Flash, integrated ADC and DAC, running up to 32 MHz in a 28-pin SOIC package. It operates down to 2.3 V at 16 MHz for mixed-signal embedded designs. Available worldwide with fast shipping.

Microchip MCP79412T-I/MNY is an I2C real-time clock IC with 1 Kb EEPROM, 64-byte SRAM, and EUI-64 node address. It supports clock frequencies up to 32.768 kHz and operates at 1.8 V nominal. Available in an 8-pin TDFN package with 6-week lead time.

The MCP47FEB02A0-E/ST is a dual-channel 8-bit DAC with I2C serial interface in a compact TSSOP-8 package. It delivers analog outputs spanning 0.01 V to 5.46 V across 2 independent channels. Perfect for calibration, bias setting, and programmable analog control in embedded and industrial systems.

Microchip MCP47FEB21A0 is a 12-bit dual-channel DAC with non-volatile EEPROM memory and I2C serial interface. It delivers 0.01V to 5.46V output range in a compact TSSOP-8 package. Suitable for precision analog signal generation in industrial and consumer applications.

LED Drvr, Avg Mode, Constant Current Microchip HV9961NG-G LED Driver IC, 8 → 450 V dc 16-Pin SOIC

The MCP4726A2T-E/CH is a 12-bit single-channel DAC from Microchip with I2C serial interface, housed in a compact SOT-23-6 package. It delivers an analog output voltage from 0.01 V to 5.46 V and includes non-volatile EEPROM for storing the power-up output value. Suited for set-point control, signal generation, and analog trimming in battery-powered and space-constrained designs.

MICROCHIP - ATSAMD21J18A-MU - MCU, 32BIT, CORTEX-M0+, 48MHZ, QFN-64

MCP4728A1-E/UN is a quad-channel 12-bit serial DAC from Microchip with I2C interface and non-volatile memory for each channel output. It supports analog output voltages up to 5.5 V and integrates an internal voltage reference, housed in a compact 10-pin MSOP package for precision analog signal generation.

Microchip MCP4728A0T-E/UN is a quad-channel 12-bit non-volatile DAC with an I2C interface, capable of outputting up to 5.5V from an internal or external voltage reference in a compact 10-pin MSOP package. On-chip EEPROM retains DAC codes after power loss without host intervention. Well-suited for calibration offsets, bias voltage generation, and programmable analog references.

Digital to Analog Converters - DAC 6-Bit Volatile DAC with Command Code

The DSPIC33EP512GP806-I/PT is a 16-bit digital signal controller in 64-pin TQFP, running at up to 60 MHz with 512 KB Flash and hardware DSP instructions. It integrates ADC, multiple serial peripherals, and a barrel shifter for real-time signal processing and motor control.

LED Driver, Uni. High Brightness, SOIC N Microchip HV9910BNG-G LED Driver IC, 8 → 450 V dc 16-Pin SOIC

The MCP73837T-FCI/UN is a highly integrated linear Li-Ion and Li-Polymer battery charger IC from Microchip, featuring automatic USB/DC input power-source selection, up to 1 A charge current, and thermal regulation in a compact MSOP-10 package. It is RoHS compliant and supports adjustable charge thresholds suitable for single-cell battery applications.

Use the download button to access the HV9923N3-G schematic symbol, PCB footprint, and 3D model.

Microchip DSPIC30F4011-30I/P is a 16-bit digital signal controller with a 40 MHz DSP core, hardware barrel shifter, and fixed-point arithmetic in a 40-pin DIP package, supporting motor control and power conversion applications. Available in stock with worldwide shipping.

Use the download button to access the LAN9252/PT schematic symbol, PCB footprint, and 3D model.

Microchip MCP87055T-U/LC is an N-channel power MOSFET rated at 25 V and 60 A with an ultra-low 7 mΩ (max) drain-source on-resistance and 162 mJ avalanche energy rating in an 8-pin DFN (PDFN-8) package. Optimized for high-current synchronous buck converters and load switches. From $1.10 in stock worldwide shipping.

The MTCH102-I/MS is a 2-channel capacitive touch controller IC from Microchip, operating at 3.3 V with simple GPIO-compatible output signals per channel. It requires no firmware and uses autonomous sensing to detect finger touch on up to 2 electrode pads. Available in a compact 8-pin MSOP surface-mount package from global authorized distributors at competitive pricing.

The MCP6002T-E/SN is a dual general-purpose op-amp from Microchip with 1 MHz gain-bandwidth product and 0.6 V/µs slew rate in an 8-pin SOIC package. It features 60 dB minimum CMRR, 4.5 mV maximum input offset, and voltage-feedback architecture, suited for low-frequency signal conditioning.

The AT24C1024BW-SH-B is a 1 Mbit I2C serial EEPROM from Microchip with up to 1 MHz clock frequency and 1,000,000 write/erase cycle endurance. It comes in an SOIC-8 package suitable for embedded data logging and configuration storage applications.

The MTCH102T-I/MU is a 2-channel projected capacitive touch sensor controller IC from Microchip, featuring autonomous touch detection with no firmware required, low power standby, and direct output signals. Available in a compact 8-pin UDFN package for consumer and industrial HMI applications worldwide.

LED Lighting Drivers UNIVERSAL HIGH BRIGHT LED DRIVER

Microchip MIC5235YM5-TR, LDO Voltage Regulator Controller, 150mA Adjustable, ±2% 5-Pin, SOT-23

24AA256UID-I/ST is a Microchip 256 Kbit (32 Kx8) I2C serial EEPROM in an 8-pin TSSOP package operating from 1.7 V to 5.5 V. It supports 400 kHz I2C Fast Mode, delivers 1 million write/erase cycle endurance, and guarantees 200-year data retention. Available from stock with worldwide shipping.

The MCP1702-3302E/TO is a fixed 3.3 V, 250 mA LDO voltage regulator from Microchip with a wide input range of 4.15 V to 13.2 V and typical dropout of 0.525 V. It offers stable regulation for battery-powered and industrial 12 V applications in a through-hole TO-92-3 package. RoHS-compliant lead-free construction with worldwide stock and standard distribution availability.

Microchip MCP3901A0T is a dual-channel analog front-end IC designed for energy metering with SPI interface. It integrates two sigma-delta ADC channels in a 20-pin SSOP package. Ideal for single-phase and polyphase energy measurement and power monitoring systems.

AFE 6 Channel, 24-Bit, 64ksps, SPI, SSOP MCP3903-I/SS, General Purpose Analogue Front End, 6-channel 24 bit, 64ksps SPI, 28-Pin SSOP

Microchip PIC12F1572-I/MS is an ultra-compact 8-bit PIC12 microcontroller running up to 32 MHz with 3.5 KB Flash, integrated ADC and DAC in an 8-pin MSOP package. It operates from 2.3 V minimum supply voltage, ideal for space-constrained and low-power embedded applications. Available in stock with worldwide shipping.

LED Driver, Uni. High Brightness, SOIC Microchip HV9910CLG-G LED Driver IC, 15 ??? 450 V dc 8-Pin SOIC

DSPIC33EP32GS506-I/PT is a 16-bit digital signal controller from Microchip with 32 KB Flash, operating up to 140 MHz and 3.6 V supply, housed in a TQFP-64 package. It integrates a high-speed ADC, barrel shifter, and boundary scan for advanced signal processing. Suited for power conversion and motor control designs.

SOT-23, 5 PIN

Microchip MCP1702-5002E/TO is a fixed 5 V, 250 mA low-dropout LDO linear voltage regulator with 330 mV typical dropout and up to 13.2 V input in a TO-92-3 through-hole package. Features low quiescent current for battery-friendly operation. Ideal for regulating 9 V batteries or 12 V supplies down to 5 V in microcontroller and sensor systems.

EEPROM 4Kbit 2x256x8 Serial-I2C SOT23-5 24LC04BT-E/OT, Serial EEPROM Memory 4kbit,, 256 x, 8bit, I2C, 1000ns 2.5 → 5.5 V, 5-Pin SOT-23

EEPROM 4K (512x8) 2-WIRE NiPdAu, 1.7V

MCU/DSP,16 Bit,dsPIC30F2011-30I/P Microchip DSPIC30F2011-30I/P, 16bit dsPIC Microcontroller, 30MIPS, 12 kB Flash, 18-Pin PDIP

DIP-40

The MCP6142-I/P is a dual-channel rail-to-rail general-purpose operational amplifier with ultra-low 5 nA typical input bias current and 80 dB typical CMRR, housed in an 8-pin DIP package. It operates from a wide supply voltage range suitable for single-supply sensor interfaces and signal conditioning. Ideal for battery-powered instruments, pH probes, and precision analog circuits requiring through-hole prototyping.

QFN-36

QFN-36

IC, LDO, 3.0V, 500MA

QFN-36

Microchip MCP4726A0T-E/CH is a 12-bit single-channel DAC with I2C serial interface in SOT-23-6 package. It outputs 0.01 V to 5.46 V analog voltage with non-volatile EEPROM storage for power-on defaults. Ideal for precision voltage reference and trimming applications.

MICROCHIP - PIC12F1572-I/P - MCU, 8BIT, PIC12, 32MHZ, DIP-8

DSPIC33EP256MC506-I/PT is a 16-bit digital signal controller from Microchip with 256 KB flash and 60 MHz maximum clock, optimized for motor control applications. It features integrated ADC, DMA, and a barrel shifter in a TQFP-64 package for high-performance embedded control.

Use the download button to access the LAN8742A-CZ-TR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LAN8742AI-CZ-TR schematic symbol, PCB footprint, and 3D model.