DSPIC30F6010-30I/PF Microchip Integrated Circuit (Quad Flat Packages) In Stock
Microchip DSPIC30F6010-30I/PF is a 16-bit digital signal controller with 40 MHz max clock, 144 KB flash, and 8 KB SRAM. It operates at 2.5 V minimum and provides UART, SPI, and I2C interfaces in an 80-pin TQFP package. Available in stock worldwide with factory-direct shipping.
- Manufacturer
- Microchip
- Package
- Quad Flat Packages
- Pin Count
- 80
- Lifecycle
- NOT RECOMMENDED
- Datasheet
- DSPIC30F6010-30I/PF Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 16-bit DSP core with 40 MHz max clock and fixed-point arithmetic barrel shifter for high-speed signal processing
- Operates at 2.5 V minimum supply voltage at 7.5 MHz, enabling low-power embedded control designs
- 80-pin TQFP package with boundary-scan support and multiple communication peripherals including UART, SPI, and I2C
Applications
The DSPIC30F6010-30I/PF is well-suited for industrial motor control, power conversion, and sensor signal conditioning applications that require real-time DSP computation at 40 MHz. Its 16-bit architecture and multiple serial interfaces make it effective for embedded control designs in HVAC systems and industrial automation controllers. The device is also used in medical instrumentation and automotive subsystems where combined DSP and MCU functionality reduces component count.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | TQFP-80 |
| Factory Lead Time | 10Weeks |
| YTEOL | 3 |
| Additional Feature | ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 7.5 MHZ |
| Barrel Shifter | YES |
| Bit Size | 16 |
| Boundary Scan | NO |
| Clock Frequency-Max | 40MHz |
| Format | FIXED POINT |
| Internal Bus Architecture | MULTIPLE |
| JESD-30 Code | S-PQFP-G80 |
| JESD-609 Code | e3 |
| Low Power Mode | YES |
| On Chip Program ROM Width | 24 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TQFP80,.63SQ |
| Package Shape | SQUARE |
| Package Style | FLATPACK, THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| ROM Programmability | FLASH |
| Screening Level | TS 16949 |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 4.75V |
| Supply Voltage-Nom | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, CONTROLLER |
| Package | Quad Flat Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | 3A991.A.2 |
| HTS Code | 8542.31.00.01 |
| Country of Origin | Philippines |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the maximum clock frequency of the DSPIC30F6010-30I/PF and how does it affect DSP throughput?
The DSPIC30F6010-30I/PF operates at up to 40 MHz, delivering a 30 MIPS throughput. Its fixed-point DSP core with hardware barrel shifter enables single-cycle multiply-accumulate operations, making it suitable for real-time control loops running at 10 kHz to 100 kHz update rates.
What is the minimum supply voltage for the DSPIC30F6010-30I/PF and what operating frequency does it support at that voltage?
The device also operates at 2.5 V minimum supply, running at up to 7.5 MHz at that lower rail. This allows low-power battery-operated designs where the 3.3 V or 5 V rail is not available, reducing dynamic power consumption significantly at reduced clock speeds.
Which industrial motor-control or power-conversion designs benefit most from the DSPIC30F6010-30I/PF at 40 MHz?
Applications such as 3-phase brushless DC motor drives, switched-mode power supplies operating at switching frequencies up to 100 kHz, and active power factor correction circuits benefit from the 40 MHz core, 16-bit resolution, and the device's multiple PWM channels with dead-time control available in the 80-pin TQFP package.
How does the 80-pin TQFP package of DSPIC30F6010-30I/PF compare to smaller Microchip DSC packages for board space-constrained designs?
The 80-pin TQFP measures approximately 12 mm x 12 mm with 0.5 mm pitch, providing 80 pins for GPIO, PWM, ADC, UART, SPI, and I2C. Smaller 28-pin or 44-pin variants give fewer peripherals; for designs needing more than 4 UART channels or more than 8 ADC inputs simultaneously, the 80-pin package is preferred.
Related Guides
LM2904BQDGKRQ1 Selection Guide: Automotive Dual Op-Amp Variants, Packages, and Alternatives
How to choose the right LM2904BQ automotive dual op-amp variant: AEC-Q100 grade, offset voltage, package, and non-automotive alternatives explained.
May 27, 2026
ST3232CDR vs ST3232 Variants: RS-232 Transceiver Selection Guide
How to choose the right ST3232 RS-232 transceiver variant: compare ST3232CDR, ST3232BDR, ST3232BTR, ST3232CTR, and ST3232EBDR by supply voltage, package, temperature, and ESD rating.
May 27, 2026
ST3232CDR RS-232 Transceiver: Application Note & Design Guide
Complete design guide for the ST3232CDR RS-232 transceiver: charge-pump capacitor selection, PCB layout, ESD protection, and circuit examples for 3.3 V systems.
May 26, 2026
TPS613222ADBVR Selection Guide: How to Choose the Right Low-Power Boost Converter
How to choose between TPS613221ADBVR, TPS613222ADBVR, and TPS613223ADBVR: key parameters include quiescent current, output voltage, and switch current rating.
May 26, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
MIC5319-1.8YD5-TR
SOT23 (5-Pin)
Integrated Circuit
PIC16F628-04/SS
Small Outline Packages
Integrated Circuit
ATSAMD21E15B-AF
Quad Flat Packages
Integrated Circuit
ATSAMD51J20A-MU
Quad Flat No-Lead
Integrated Circuit
ATSAMD51N20A-AU
Quad Flat Packages
Integrated Circuit
AT28HC256-12TU
Small Outline Packages
Integrated Circuit
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”