MCP79412T-I/MNY Microchip Integrated Circuit (Small Outline No-lead) In Stock

Microchip MCP79412T-I/MNY is an I2C real-time clock IC with 1 Kb EEPROM, 64-byte SRAM, and EUI-64 node address. It supports clock frequencies up to 32.768 kHz and operates at 1.8 V nominal. Available in an 8-pin TDFN package with 6-week lead time.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP79412T-I/MNYSmall Outline No-lead
Quick Facts
Manufacturer
Microchip
Package
Small Outline No-lead
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.4670(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of MCP79412T-I/MNY?

  • I2C serial interface supporting 100 kHz and 400 kHz modes at 1.8 V nominal operation
  • Integrated 1 Kb EEPROM for user data and 64-byte battery-backed SRAM for time-critical storage
  • EUI-64 node address for unique network identification in IoT and communication designs
  • Interrupt output with alarm capability for time-triggered events and low-power wake-up

What is MCP79412T-I/MNY used for?

The MCP79412T-I/MNY is suited for IoT sensor nodes requiring precise timekeeping with minimal board area in 8-pin TDFN packages. It fits battery-backed data loggers and industrial equipment needing persistent timestamps across 1.8 V power domains. Its EUI-64 address simplifies unique device identification in networked embedded systems.

What are the specifications of MCP79412T-I/MNY?

Manufacturer Package CodeTDFN-8
Factory Lead Time6Weeks
YTEOL13
Additional FeatureALSO OPERATES AT 100KHZ WITH 1.8 V NOMINAL
Clock Frequency-Max0.032MHz
Information Access MethodSERIAL(I2C)
Interrupt CapabilityY
JESD-30 CodeR-PDSO-N8
JESD-609 Codee4
On Chip Data RAM Width8
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOLCC8,.11,20
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
RAM (words)64
Screening LevelTS 16949
Supply Current-Max3mA
Supply Voltage-Max5.5V
Supply Voltage-Min1.8V
Supply Voltage-Nom2.5V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishNickel/Palladium/Gold (Ni/Pd/Au)
Terminal FormNO LEAD
Terminal Pitch0.5mm
Terminal PositionDUAL
Time-MinSECONDS
Time@Peak Reflow Temperature-Max (s)40
VolatileNO
uPs/uCs/Peripheral ICs TypeTIMER, REAL TIME CLOCK
PackageSmall Outline No-lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginThailand

Where can I find the MCP79412T-I/MNY datasheet?

MCP79412T-I/MNY Datasheet Download

Official datasheet from Microchip

What are equivalent replacements for MCP79412T-I/MNY?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What supply voltage does the MCP79412T-I/MNY require, and can it run from a coin-cell backup?

The MCP79412T-I/MNY operates at a 1.8 V nominal supply and is also specified to run at 100 kHz I2C speed at that voltage. A separate VBAT pin allows a coin-cell battery to maintain timekeeping when primary power is removed, making it ideal for 8-pin TDFN designs with continuous clock operation.

How much non-volatile storage does the MCP79412T-I/MNY provide for user configuration data?

The device integrates 1 Kb of EEPROM accessible over the I2C bus for storing user configuration or calibration data, plus 64 bytes of battery-backed SRAM. This combination lets embedded systems preserve both persistent settings and time-stamped runtime state within a single 8-pin component.

When is MCP79412T-I/MNY preferred over a standalone RTC without an EUI-64 node address?

The MCP79412T-I/MNY is preferred in networked IoT and industrial designs where each node requires a unique 64-bit hardware identifier. The pre-programmed EUI-64 address eliminates the need for external EEPROM or firmware-generated IDs, reducing BOM cost and board space while simplifying network stack integration at 1.8 V to 5.5 V supply levels.

What package does the MCP79412T-I/MNY use, and how does it benefit compact PCB layouts?

It comes in an 8-pin TDFN (small outline no-lead) package with a compact footprint, enabling high-density PCB layouts where space is constrained. The exposed thermal pad and leadless construction improve thermal dissipation and reduce parasitic inductance compared to leaded packages, supporting designs targeting less than 10 mm² area.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.4670
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$1.2300$1.23
50+$1.2100$60.50
100+$1.0700$107.00
500+$0.4829$241.45
1000+$0.4750$475.00
3000+$0.4670$1401.00
pcs
Unit price: $1.2300 · Total: $1.23

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea