Microchip

The DSPIC30F6010A-30I/PF is a 16-bit digital signal controller running at up to 30 MIPS with a 40 MHz clock and fixed-point DSP core. It integrates a barrel shifter, extensive on-chip peripherals, and operates from 2.5 V to 5.5 V for broad supply compatibility. Housed in an 80-lead TQFP package and available with worldwide shipping.

LDO Voltage Regulators

Microchip PIC24FV32KA304-I/PT is a 16-bit PIC24 microcontroller running at up to 32 MHz with 32 kB Flash and 16 MIPS performance. It includes an integrated ADC and operates from a 2 V minimum supply at 8 MHz. Housed in a 44-pin TQFP package with 28-week lead time.

17.90 X 7.50 MM, 2.65 MM HEIGHT, 1.27 MM PITCH, LEAD FREE, PLASTIC, SOIC-28

Serial to Parallel Logic Converters 325V 64Ch Push-Pull

PIC24FV32KA304-I/ML is a 16-bit PIC24 microcontroller from Microchip in a 44-pin QFN package, running at up to 32 MHz with 32 kB Flash and integrated ADC. It operates from as low as 2 V at 8 MHz for battery-powered applications. Suitable for IoT sensors, consumer electronics, and industrial control designs requiring a compact 16-bit MCU with low-voltage capability.

PIC32MX210F016B-I/ML is a 32-bit MIPS-based microcontroller with 16KB flash, 4KB RAM, and 40MHz clock frequency featuring integrated ADC, DMA, and boundary scan in a compact 28-pin QFN package. Key specs include 2.3V to 3.6V supply and USB support. Available from stock with worldwide shipping.

MCP6004T-I/SL is a quad rail-to-rail input/output operational amplifier with 1MHz bandwidth and 60dB CMRR minimum. It operates from 1.8V to 5.5V supply in a 14-pin SOIC package for general-purpose signal conditioning.

CPLD - Complex Programmable Logic Devices CPLD 128 MACROCELL w/ISP LOW PWR 5V

Microchip MCP6004-I/P is a quad general-purpose CMOS op-amp with rail-to-rail input and output, 1 MHz bandwidth, and 1.8 V to 6 V single-supply operation, packaged in a 14-pin DIP for easy prototyping and breadboard use.

Use the download button to access the PIC24FJ128GB204-I/ML schematic symbol, PCB footprint, and 3D model.

MCU,PIC24,16MIPS,32K Flash,SDIP28 Microchip PIC24F32KA302-I/SP, 16bit PIC Microcontroller, 32MHz, 32 kB Flash, 28-Pin SPDIP

PIC32MX210F016B-I/SP is a 32-bit MIPS-based microcontroller from Microchip with 16 KB Flash, 4 KB SRAM, and a maximum clock frequency of 40 MHz. It includes a 10-bit ADC, DMA channels, SPI, I2C, UART interfaces, and JTAG boundary scan, housed in a 28-pin SPDIP package for prototyping and low-pin-count embedded applications.

Serial to Parallel Logic Converters 220V 32Ch Open D Out

MCU,PIC24,16MIPS,32K Flash,TQFP44 Microchip PIC24F32KA304-I/PT, 16bit PIC Microcontroller, 32MHz, 32 kB Flash, 44-Pin TQFP

MCU,PIC24,16MIPS,32K Flash,QFN28 Microchip PIC24F32KA302-I/ML, 16bit PIC Microcontroller, 32MHz, 32 kB Flash, 28-Pin QFN

16-bit Microcontrollers - MCU 32KB 2KBRM 512B EEP 16MIPS 12b ADC CTMU

LED Drvr, Avg Mode, Constant Current

QTouch 7-ch GuardChannel AKS Buttons I2C AT42QT1070-SSU, Touch Screen Controller Serial-I2C, 14-Pin SOIC

MCU 8-Bit AVR RISC 8KB Flash 2.5/3.3/5V Atmel ATTINY84A-SSU, 8bit AVR Microcontroller, 20MHz, 8 kB Flash, 14-Pin SOIC

Microchip PIC16F1788-I/SP is an 8-bit PIC microcontroller operating up to 32 MHz with 16384 words of Flash memory. It features integrated ADC and DAC channels with operation down to 2.3 V at 16 MHz. Available in a 28-pin SPDIP package for easy through-hole prototyping.

Gate Drivers

The DSPIC30F6010-20I/PF is a 16-bit digital signal controller from Microchip Technology operating at up to 40 MHz with 144 KB of flash memory. It integrates hardware-accelerated DSP math, a 12-bit ADC, motor-control PWM, and CAN/UART/SPI/I2C peripherals in an 80-pin TQFP package. Available in lead-free versions and backed by worldwide distribution for industrial and motor-control applications.

MCU,PIC Flash 32KB 8 bit,XLP,USB2 SOIC28 Microchip PIC18LF25K50-I/SO, 8bit PIC Microcontroller, 16MHz, 32k B Flash, 28-Pin SOIC

DIP-32

9 X 9 MM, 0.90 MM HEIGHT, LEAD FREE, PLASTIC, QFN-64

MICROCHIP - MIC5504-3.3YM5-TR - LDO VOLT REG, 0.3A, 3.3V, SOT-23-5

The PIC16F1788-I/SS is an 8-bit PIC16 microcontroller from Microchip with 28 KB Flash, 2 KB RAM, 32 MHz maximum clock, integrated ADC, DAC, and SSOP-28 package, featuring low-voltage operation down to 2.3 V at 16 MHz for mixed-signal embedded control and sensor interface designs.

Microchip DSPIC30F6010-30I/PF is a 16-bit digital signal controller with 40 MHz max clock, 144 KB flash, and 8 KB SRAM. It operates at 2.5 V minimum and provides UART, SPI, and I2C interfaces in an 80-pin TQFP package. Available in stock worldwide with factory-direct shipping.

The PIC16F1788-I/SO is an 8-bit PIC16 microcontroller with 28 KB Flash, integrated ADC and DAC, running up to 32 MHz in a 28-pin SOIC package. It operates down to 2.3 V at 16 MHz for mixed-signal embedded designs. Available worldwide with fast shipping.

Microchip MCP79412T-I/MNY is an I2C real-time clock IC with 1 Kb EEPROM, 64-byte SRAM, and EUI-64 node address. It supports clock frequencies up to 32.768 kHz and operates at 1.8 V nominal. Available in an 8-pin TDFN package with 6-week lead time.

The MCP47FEB02A0-E/ST is a dual-channel 8-bit DAC with I2C serial interface in a compact TSSOP-8 package. It delivers analog outputs spanning 0.01 V to 5.46 V across 2 independent channels. Perfect for calibration, bias setting, and programmable analog control in embedded and industrial systems.

Microchip MCP47FEB21A0 is a 12-bit dual-channel DAC with non-volatile EEPROM memory and I2C serial interface. It delivers 0.01V to 5.46V output range in a compact TSSOP-8 package. Suitable for precision analog signal generation in industrial and consumer applications.

LED Drvr, Avg Mode, Constant Current Microchip HV9961NG-G LED Driver IC, 8 → 450 V dc 16-Pin SOIC

The MCP4726A2T-E/CH is a 12-bit single-channel DAC from Microchip with I2C serial interface, housed in a compact SOT-23-6 package. It delivers an analog output voltage from 0.01 V to 5.46 V and includes non-volatile EEPROM for storing the power-up output value. Suited for set-point control, signal generation, and analog trimming in battery-powered and space-constrained designs.

MICROCHIP - ATSAMD21J18A-MU - MCU, 32BIT, CORTEX-M0+, 48MHZ, QFN-64

MCP4728A1-E/UN is a quad-channel 12-bit serial DAC from Microchip with I2C interface and non-volatile memory for each channel output. It supports analog output voltages up to 5.5 V and integrates an internal voltage reference, housed in a compact 10-pin MSOP package for precision analog signal generation.

Microchip MCP4728A0T-E/UN is a quad-channel 12-bit non-volatile DAC with an I2C interface, capable of outputting up to 5.5V from an internal or external voltage reference in a compact 10-pin MSOP package. On-chip EEPROM retains DAC codes after power loss without host intervention. Well-suited for calibration offsets, bias voltage generation, and programmable analog references.

Digital to Analog Converters - DAC 6-Bit Volatile DAC with Command Code

The DSPIC33EP512GP806-I/PT is a 16-bit digital signal controller in 64-pin TQFP, running at up to 60 MHz with 512 KB Flash and hardware DSP instructions. It integrates ADC, multiple serial peripherals, and a barrel shifter for real-time signal processing and motor control.

LED Driver, Uni. High Brightness, SOIC N Microchip HV9910BNG-G LED Driver IC, 8 → 450 V dc 16-Pin SOIC

The MCP73837T-FCI/UN is a highly integrated linear Li-Ion and Li-Polymer battery charger IC from Microchip, featuring automatic USB/DC input power-source selection, up to 1 A charge current, and thermal regulation in a compact MSOP-10 package. It is RoHS compliant and supports adjustable charge thresholds suitable for single-cell battery applications.

Use the download button to access the HV9923N3-G schematic symbol, PCB footprint, and 3D model.

Microchip DSPIC30F4011-30I/P is a 16-bit digital signal controller with a 40 MHz DSP core, hardware barrel shifter, and fixed-point arithmetic in a 40-pin DIP package, supporting motor control and power conversion applications. Available in stock with worldwide shipping.

Use the download button to access the LAN9252/PT schematic symbol, PCB footprint, and 3D model.

Microchip MCP87055T-U/LC is an N-channel power MOSFET rated at 25 V and 60 A with an ultra-low 7 mΩ (max) drain-source on-resistance and 162 mJ avalanche energy rating in an 8-pin DFN (PDFN-8) package. Optimized for high-current synchronous buck converters and load switches. From $1.10 in stock worldwide shipping.

The MTCH102-I/MS is a 2-channel capacitive touch controller IC from Microchip, operating at 3.3 V with simple GPIO-compatible output signals per channel. It requires no firmware and uses autonomous sensing to detect finger touch on up to 2 electrode pads. Available in a compact 8-pin MSOP surface-mount package from global authorized distributors at competitive pricing.

The MCP6002T-E/SN is a dual general-purpose op-amp from Microchip with 1 MHz gain-bandwidth product and 0.6 V/µs slew rate in an 8-pin SOIC package. It features 60 dB minimum CMRR, 4.5 mV maximum input offset, and voltage-feedback architecture, suited for low-frequency signal conditioning.

The AT24C1024BW-SH-B is a 1 Mbit I2C serial EEPROM from Microchip with up to 1 MHz clock frequency and 1,000,000 write/erase cycle endurance. It comes in an SOIC-8 package suitable for embedded data logging and configuration storage applications.

The MTCH102T-I/MU is a 2-channel projected capacitive touch sensor controller IC from Microchip, featuring autonomous touch detection with no firmware required, low power standby, and direct output signals. Available in a compact 8-pin UDFN package for consumer and industrial HMI applications worldwide.