MCP6002T-E/SN Microchip Integrated Circuit (Small Outline Packages) In Stock
The MCP6002T-E/SN is a dual general-purpose op-amp from Microchip with 1 MHz gain-bandwidth product and 0.6 V/µs slew rate in an 8-pin SOIC package. It features 60 dB minimum CMRR, 4.5 mV maximum input offset, and voltage-feedback architecture, suited for low-frequency signal conditioning.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP6002T-E/SN Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.3140(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual operational amplifier with 1 MHz gain-bandwidth product
- 0.6 V/µs slew rate for low-frequency analog signal processing
- Voltage-feedback architecture with internal frequency compensation
- Common-mode rejection ratio minimum 60 dB, typical 76 dB
- Maximum input offset voltage of 4500 µV for precision analog circuits
- 8-pin SOIC package with RoHS-compliant lead-free construction
Applications
The MCP6002T-E/SN is widely used in low-frequency sensor signal conditioning, active filters, and transimpedance amplifiers in portable battery-powered instruments where low supply current is essential. Its 1 MHz bandwidth and 0.6 V/µs slew rate suit audio preamplifiers, photodiode amplifiers, and ADC input buffers in 3.3 V or 5 V single-supply systems. Industrial data acquisition front ends and consumer wearable devices both leverage its dual-channel SOIC-8 form factor to minimize BOM and PCB area.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | SOIC-8 |
| Factory Lead Time | 6Weeks |
| YTEOL | 9 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Common-mode Reject Ratio-Min | 60dB |
| Common-mode Reject Ratio-Nom | 76dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 4500 µV |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e3 |
| Low-Bias | NO |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP8,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Packing Method | TAPE AND REEL |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Nom | 0.6V/us |
| Supply Current-Max | 0.34mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 1000 |
| Voltage Gain-Min | 25118.86 |
| Wideband | NO |
| ## MCP6002T-E/SN Alternates Showing results | Image |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Taiwan, Thailand |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for MCP6002T-E/SN:
suggested
suggested
suggested
suggested
Frequently Asked Questions
What is the gain-bandwidth product and slew rate of the MCP6002T-E/SN, and what signal frequencies does it handle?
The MCP6002T-E/SN has a 1 MHz gain-bandwidth product and 0.6 V/µs slew rate, making it suitable for audio and sensor signals below 100 kHz. At unity gain, it handles signals up to 1 MHz with adequate phase margin for stable closed-loop operation.
How does the MCP6002T-E/SN's CMRR specification benefit sensor bridge amplifier designs?
With a minimum 60 dB and typical 76 dB common-mode rejection ratio, the MCP6002T-E/SN suppresses common-mode noise from resistive bridge sensors, improving measurement accuracy in strain gauges, pressure transducers, and temperature bridges without additional filtering.
When replacing a single-channel op-amp with the MCP6002T-E/SN's dual-channel configuration, what design advantage is gained?
Using the dual-channel MCP6002T-E/SN in an 8-pin SOIC package instead of two separate single-channel op-amps reduces the PCB footprint by roughly 50%, simplifies routing, and cuts BOM cost per amplifier stage in high-volume 1 MHz bandwidth signal conditioning boards.
Related Guides
150141RS73100 Red LED Indicator and Current-Resistor Design Guide
Design a reliable 150141RS73100 red LED indicator with worst-case resistor sizing, GPIO checks, PWM drive, layout, and production validation.
Jul 11, 2026
742792651 Ferrite Bead EMI Filter and Power Integrity Design Guide
Practical guidance for using 742792651 in ferrite-bead EMI filters, including bias, DCR, damping, layout, and validation.
Jul 11, 2026
How to Choose a Ferrite Bead for EMI Suppression Rails: Selection Guide
Compare 742792651 and related ferrite beads by impedance, current rating, DCR, package, layout, and EMI test context.
Jul 10, 2026
150141BS73100 Design Guide for 3528 Status Indicator LED Circuits
Design 3528 status indicator LED circuits with 150141BS73100: current setting, resistor sizing, polarity, optics, and sourcing checks.
Jul 10, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.3610 | $0.36 |
| 100+ | $0.3300 | $33.00 |
| 3300+ | $0.3140 | $1036.20 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”