Analog Devices

LTC4162EUFD-FADM#PBF is a multi-cell LiFePO4 step-down battery charger from Analog Devices in a 28-pin QFN package, supporting up to 35 V input, 3.2 A charge current, PowerPath management, and I2C telemetry. Ideal for industrial, medical, and portable power systems requiring intelligent battery management.

Op Amp Dual GP R-R O/P ±5.5V/11V Automotive 8-Pin MSOP Tube

Analog to Digital Converters - ADC ADC with Precision Resistor Network

Analog Devices LTC4162IUFD-FSTM#PBF is a multi-cell LiFePO4 step-down battery charger IC supporting up to 35 V input and 3.2 A charge current. It integrates an adjustable threshold and single-channel linear charging in a compact 28-pin QFN package. Available worldwide with fast shipping.

Switching Voltage Regulators Dual 4MHz, 3A Synchronous Step-Down DC/DC Converter

Switching Voltage Regulators Wide Vin Range Buck-Boost Charge Pump with Watchdog Timer

Analog Devices LTC3115EFE-2#TRPBF is an automotive-grade synchronous buck-boost DC-DC converter accepting 2.7 V to 40 V input and delivering a regulated 2.7 V to 40 V output at up to 0.8 A. Using voltage-mode PWM control, it operates seamlessly across step-down and step-up modes in a 20-pin TSSOP exposed-pad package for automotive and industrial power management.

Analog Devices LTC7000IMSE-1#PBF is a fast 150 V protected high-side N-channel MOSFET static switch driver in an MSOP-12 package. It provides robust gate drive for high-voltage load switching with integrated protection against reverse current, overcurrent, and overvoltage events. Ideal for hot-swap controllers, industrial power switches, and server backplane load management up to 150 V bus voltages.

Analog Devices AD8318 is a 1 MHz to 6 GHz logarithmic amplifier and RF power detector in a compact QFN package, offering 60 dB dynamic range and a temperature-compensated DC output proportional to input power. Available from stock worldwide with fast shipping.

The Analog Devices LT8606EMSE#TRPBF is a 42 V input, 350 mA synchronous step-down switching regulator featuring an ultra-low 2.5 µA quiescent current and current-mode PWM control. Housed in a 10-lead MSOP package, it delivers high efficiency at light loads, making it ideal for battery-powered and always-on industrial systems.

Analog Devices LT6001IMS8#TRPBF is a dual low-power rail-to-rail input/output op-amp with 18 V supply range and 96 dB typical CMRR in an MSOP-8 package, automotive-grade. Suited for precision signal conditioning in portable and automotive electronics.

Analog Devices LT6001IMS8#PBF is a dual low-power rail-to-rail input/output op amp rated to 18V supply with 82 dB minimum CMRR and 10 nA maximum bias current. It suits automotive and industrial signal conditioning in an 8-pin MSOP package. Designed for battery monitors, sensor amplifiers, and low-voltage portable systems requiring wide supply tolerance.

The LT8606EMSE#PBF is a 42V, 350mA synchronous step-down switching regulator with ultra-low 2.5µA quiescent current, ideal for always-on battery systems. It operates from 3V to 42V input and delivers regulated output with high efficiency across wide load ranges. Available worldwide with fast shipping.

IC REG INV ADJ 0.35A TSOT23-5

8-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference

60VIN, 5A Silent Switcher µModule Regulator

Analog Devices LTC1044AIS8#PBF is a switched-capacitor voltage converter IC supporting 1.5V to 12V input with up to 13V output capability in an 8-pin SOIC package. It performs voltage inversion and doubling without inductors using only external capacitors. Ideal for generating negative rails and dual supplies in battery-powered analog and mixed-signal circuits.

LDO Regulator Pos 5V 0.05A Automotive 8-Pin MSOP EP Tube

Low Voltage Current Mode PWM Controller.

LDO Voltage Regulators 1A Low Dropout Linear regulators

Low noise: 11 µV rms independent of fixed output voltage ► PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V ► Input voltage range: 2.7 V to 20 V ► Maximum output current: 200 mA ► Initial accuracy: ±0.8% ► Accuracy over line, load, and temperature ► −1.2% to +1.5%, TJ = −40°C to +85°C ► ±1.8%, TJ = −40°C to +125°C ► Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5 V ► User programmable soft start (LFCSP and SOIC only) ► Low quiescent current, IGND

Analog Devices HMC406MS8G is a GaAs single-stage RF power amplifier covering DC to 6 GHz with 13 dB gain and 20 dBm maximum input power from a 5.5 V supply. It is housed in an 8-pin MSOP with exposed pad for efficient thermal dissipation, targeting microwave radio, VSAT, and test instrumentation applications.

Analog Devices LT8610ACEMSE-1#PBF is a 42 V, 3.5 A synchronous step-down DC-DC regulator with an ultra-low 2.5 µA quiescent current in an MSOP-16 package. It uses current-mode PWM control operating from 3 V to 42 V input with a fixed 1 MHz switching frequency to minimize external component size. Ideal for automotive, industrial IoT, and battery-powered systems requiring high efficiency over a wide load range from 24 V or 12 V rails.

LGA-16

Dual 25A or Single 50A DC/DC µModule Regulator with 1% DC Accuracy

Accelerometers Low Noise 30kHz +200g 1-axis XL

Charge Pump INV -2V 20mA 8-Pin MSOP T/R

Analog Devices LTC2067HMS8#PBF is a dual zero-drift operational amplifier with ultra-low 10 µA supply current per channel and 35 pA maximum input bias current at 25°C. It delivers 123 dB typical common-mode rejection ratio in an 8-pin SOIC package, making it ideal for precision sensor signal conditioning and low-power measurement applications.

Analog Devices LTC2067HMS8#TRPBF is a dual zero-drift operational amplifier with 10 µA maximum supply current and an ultra-low bias current of 35 pA at 25°C. Features 103 dB minimum CMRR and precision voltage feedback architecture in an MSOP-8 package. Available in tape-and-reel with worldwide in-stock shipping.

ANALOG DEVICES - ADR395BUJZ-REEL7 - VOLTAGE REF, SERIES, 5V, TSOT-5

Up/Down Conv Mixer 26.5GHz 24-Pin CLLCC T/R

Analog Devices LTC6655BHMS8-2.048#PBF is an ultra-low-noise 2.048 V precision voltage reference in an MSOP-8 package. It delivers output accuracy of 2.0474 V to 2.0485 V with extremely low noise and drift, making it ideal for high-resolution ADC and DAC reference applications. Available worldwide for precision measurement and instrumentation designs.

Switching Voltage Regulators No Rsense Constant Frequency Current Mode Boost/Flyback/SEPIC DC/DC Controller

LT3489EMS8E#TRPBF is a current-mode PWM boost DC-DC converter accepting 2.6 V to 16 V input and producing up to 40 V output at 5 A switch current in an 8-pin MSOP with exposed pad. It delivers high-efficiency step-up conversion for applications requiring wide input range and high output voltage. Ideal for LED drivers, OLED bias supplies, and battery-powered handheld instruments needing compact, high-voltage boost regulation.

The LT8304HS8E#PBF is a micropower no-opto isolated flyback converter IC from Analog Devices featuring a 150V 3.6A integrated switch, operating from 3V to 100V input. It uses voltage-mode resonant control to regulate isolated outputs without an optocoupler, simplifying design. Available in an SO-8 package with RoHS-compliant construction for compact power supply designs.

Analog Devices LT3650EMSE-4.2#PBF is a high-voltage 2A monolithic Li-Ion battery charger IC with a 4.2V float voltage in a 12-lead MSOP package. It supports single-cell lithium battery charging with adjustable charge current from a wide input voltage range. Available from authorized distributors with worldwide shipping.

LDO Voltage Regulators 800mA ULN 1.5to5.1Vo Adj LDO

LTM8023MPV#PBF is an Analog Devices 36V, 2A step-down µModule switching regulator with current-mode PWM control and output voltage range of 0.8 V to 10 V. Input voltage range spans 3.6 V to 36 V, enabling broad power supply compatibility. Available from authorized distributors with competitive pricing and worldwide shipping.

Analog Devices LTC2333ILX-16#PBF is a buffered octal 16-bit successive approximation ADC sampling at up to 800ksps per channel with a software-configurable SoftSpan input range of plus or minus 10.24V and 30V peak-to-peak common mode range. Packaged in a 48-pin LQFP for high-channel-count signal acquisition. Available from stock worldwide.

LDO Regulator Neg -1.22V to -20V 0.2A Automotive 5-Pin TSOT-23 T/R

The LTC2333CLX-16#PBF is a buffered octal 16-bit successive approximation ADC from Analog Devices sampling at 800 ksps with ±10.24 V SoftSpan differential inputs and 30 Vp-p common-mode range in a 48-pin QFP package. It achieves 0.00458% maximum linearity error and 0.55 µs conversion time for high-channel-count data acquisition. Available from stock worldwide for industrial and instrumentation applications.

Precision Amplifiers 2x L Pwr Prec, pA In Op Amps

Precision Amplifiers Dual Precision Op Amp

The LTC1550LCS8-2.5#PBF is a low-noise switched-capacitor voltage inverter from Analog Devices that generates a stable -2.5 V output from a 2.7 V to 5.25 V positive input supply. Housed in an 8-pin SOIC package, it requires only small external capacitors and is designed for dual-supply op-amp, ADC reference, and LCD bias applications where a negative rail is needed without an inductor.

LDO Voltage Regulators 200mA L/N Negative LDO in Thin SOT

The AD8367S is a 500 MHz variable-gain amplifier (VGA) with a 45 dB linear-in-dB gain control range and an integrated square-law detector for RSSI output. It operates from a single 2.7 V to 5.5 V supply with a 50 Ω matched input. Available from Analog Devices in a small-outline package, in stock with worldwide shipping.

Voltage References uP Prec Shunt Volt Ref 1.25V

The LTC1550LCMS8-2.5#PBF is a low-noise switched-capacitor voltage inverter from Analog Devices that generates a -2.5V output from a 2.7V–5.25V input with minimal external components. Available in MSOP-8 package with RoHS-compliant Pb-free construction, in stock with worldwide shipping.

Charge Pump INV -2V 20mA 8-Pin MSOP

The LTC1550LCMS8-2#PBF is a switched-capacitor inverting charge pump regulator that converts a 2.7 V to 5.25 V input to a regulated -2 V output at up to 20 mA. Housed in an 8-pin MSOP package, it is ideal for generating negative bias voltages in LCD displays, op-amp circuits, and portable electronic designs.