Analog Devices

The LTC4162EUFD-FAD is a 35 V, 3.2 A multi-cell LiFePO4 step-down battery charger with integrated PowerPath control and I2C telemetry in a 28-pin QFN package. It features programmable charge current, input voltage regulation, and real-time monitoring of voltage, current, and temperature via I2C. Available from stock with worldwide shipping.

The LTC1550LCMS8-2.5#TRPBF is an Analog Devices switched-capacitor charge pump voltage inverter that generates -2.5 V from a 2.7 V to 5.25 V input supply with up to 20 mA output current. Housed in a compact 8-pin MSOP package, it delivers regulated negative voltage without inductors. Available in tape and reel, lead-free packaging for modern PCB assembly.

The LTC4099EUDC#PBF is a USB power manager and battery charger IC from Analog Devices that combines input fault protection, power path management, and Li-Ion or Li-Polymer battery charging in a single 20-pin QFN package. It supports adjustable charge current and voltage thresholds to accommodate various battery configurations while delivering up to 1 A from a USB port. The device targets smartphones, tablets, portable medical instruments, and handheld industrial devices requiring integrated USB charging with robust fault protection.

Switching Controllers Isolated Flyback controller w/Light load

LTC3621HMS8E-3.3#PBF is a synchronous step-down switching regulator from Analog Devices with a fixed 3.3 V output, 1 A current capability, 1 MHz switching frequency, and 2.7 V to 17 V input range featuring ultralow quiescent current in an 8-pin MSOP-EP package. From $3.20, in stock, worldwide shipping.

Hot Swap Controller 1-CH 80V N-Channel Positive High Voltage Automotive 8-Pin MSOP T/R

The LTC6431AIUF-20#PBF is a wideband medium-power IF amplifier by Analog Devices, providing a fixed 20 dB gain with low distortion and 50 ohm input/output impedance matching. It is optimized for intermediate frequency signal chains in communications and radar receivers. Packaged in a compact QFN footprint for surface-mount assembly.

Analog Devices LTC4162EUFD-SADM#PBF is a multi-cell lithium-ion battery charger supporting up to 35V input and 3.2A charge current. It integrates telemetry and system power management in a 28-pin QFN package. Available in stock for worldwide shipping.

Analog Devices LT8391AIUFD#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 28 pins, 60 V, -40°C to 125°C in Quad Flat No-Lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

LT8391AEUFD#PBF is an Analog Devices automotive-grade synchronous 4-switch buck-boost LED driver controller with 2800 µA supply current in a 28-pin QFN EP package. Designed for wide input-to-output voltage LED string driving in automotive lighting and industrial illumination systems.

Analog Devices LTC6431AIUF-20#TRPBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 24 pins, 50ohm in Quad Flat No-Lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LTC4162EUFD-LADM#PBF is a multi-cell lithium-ion step-down battery charger with PowerPath control, supporting up to 35 V input and 3.2 A charge current in a 28-lead QFN package with I2C telemetry. It provides programmable charge voltage, input current limit, and real-time fuel-gauge data over I2C. Available in stock worldwide with fast shipping.

The LT4294IDD#TRPBF is a Power over Ethernet Plus Plus (PoE++) Powered Device interface controller from Analog Devices. It supports IEEE 802.3bt Type 3 and Type 4 PD operation with up to 90W power delivery. Available in a 10-lead DFN package with competitive pricing and worldwide shipping.

LTC2850IMS8#TRPBF is a Analog Devices integrated circuit for industrial electronics and embedded systems. Key specs include 3.3 V, 8 pins, and TSSOP. From quoted pricing with in stock worldwide shipping support.

Op Amp Dual GP R-R O/P ±5.5V/11V Automotive 8-Pin MSOP T/R

Analog Devices LT4294IMS#TRPBF is a PoE PD (Powered Device) controller supporting IEEE 802.3bt Type 3 and Type 4 with up to 71.3W power delivery at 60V input in a compact 10-pin MSOP package. It integrates classification, detection, and power-on sequencing for single-port PoE++ endpoints without an external MOSFET or supervisor. Ideal for high-power IP cameras, wireless access points, and smart building IoT nodes requiring ultra-high-power PoE.

The LTC4162EUFD-SST#PBF is a multi-cell lithium-ion step-down battery charger IC from Analog Devices supporting up to 35 V input and 3.2 A charge current with PowerPath control and I2C telemetry. It integrates advanced battery health monitoring in a 28-pin QFN package. Available worldwide for portable industrial, medical, and multi-cell battery pack applications.

Single Supply, 24-Bit, Sigma-Delta ADC with ±10 V and 0 mA to 20 mA Inputs, Open Wire Detection

Analog Devices LTC2385CUH-18#PBF is an 18-bit, 5 Msps successive approximation ADC with a differential input range of ±4.096 V and a maximum linearity error of 0.0015%. It achieves a 0.31 µs maximum conversion time for high-throughput precision data acquisition. The 48-pin QFN package enables compact, high-channel-density measurement system designs.

Analog Devices LTC2385IUH-18#PBF is an 18-bit, 5 Msps successive approximation register ADC in a 48-pin QFN package. Delivers 0.0015% linearity error and 0.31 µs conversion time. Available from global distributors with worldwide shipping.

Comparator Single R-R O/P ±22V/44V Automotive 5-Pin TSOT-23 T/R

Use the download button to access the AD4111BCPZ-RL7 schematic symbol, PCB footprint, and 3D model.

LDO Regulator Pos 3.6V 3A 4-Pin(3+Tab) DDPAK Tube

LTC1417CGN#PBF is a 14-bit successive-approximation ADC with differential input range of ±2.048V, 2.25µs maximum conversion time, and serial output in a 16-pin SSOP package for precision data acquisition.

The LT3091HR#PBF is a negative adjustable LDO linear regulator from Analog Devices, delivering up to 1.5 A output current with an output voltage range of 0 V to -32 V. Featuring a 360 mV typical dropout voltage and automotive-grade 8-pin DDPAK package, it suits space-constrained industrial and automotive designs.

Analog Devices HMC232LP4 is a high-performance GaAs SPDT RF switch operating from DC to 12 GHz with 3.1 dB maximum insertion loss and 37 dB minimum isolation. It handles up to 30 dBm CW input power with a 50 Ω characteristic impedance in a compact 24-QFN package for microwave and communication systems.

Analog Devices LTC4058EDD-4.2#PBF is a standalone linear Li-Ion battery charger IC in a compact 8-DFN package with a 4.2 V float voltage. It delivers up to 600 mA programmable charge current with thermal regulation and automatic recharge. Available from authorized distributors with worldwide shipping.

LTC7000MPMSE#TRPBF is a fast 150V protected high-side NMOS static switch driver IC from Analog Devices, featuring Schmitt trigger inputs, open-drain outputs, and single-function gate drive capability. Ideal for industrial power switching and motor control applications.

Digital to Analog Converters - DAC 32-Ch 14-Bit 8uS IC

Analog Devices LTC3246IMSE#PBF is a wide-input buck-boost charge pump regulator with an integrated watchdog timer in a 16-pin MSOP package. It accepts 2.7 V to 38 V input and delivers a regulated output suitable for mixed-signal systems requiring both buck and boost conversion. The watchdog feature adds system health monitoring without a separate supervisor IC.

The LTC1693-5CMS8#TRPBF is a single high-side MOSFET gate driver from Analog Devices, capable of delivering 1.7 A peak output current in both inverting and non-inverting configurations. It operates from a 2.7 V to 6 V supply and is housed in an 8-pin MSOP package for compact power stage designs. Ideal for driving N-channel MOSFETs in synchronous buck converters, motor drivers, and high-frequency switching power supplies.

Precision Amplifiers 18VLowPowerRRIO Untrimmed CmosAmp

Switching Voltage Regulators 1.1A, 2.1MHz Boost Converter with SS

Digital to Analog Converters - DAC IC Quad 12-Bit VTG Output

The LT3060ETS8#TRMPBF is a 45V input, 100mA, ultra-low noise, micropower LDO linear regulator from Analog Devices. It features a low 300mV typical dropout voltage and wide input range. Available in an SOT-23 8-pin package with worldwide shipping.

Switching Voltage Regulators 1.1A, 1.3MHz Boost Converter with SS

Analog Devices LTC1693-3CMS8#PBF is a high-speed single-channel MOSFET gate driver capable of sourcing and sinking peak currents of 2 A to switch power MOSFETs rapidly in an 8-pin MSOP package. It supports high-side drive capability and standard logic-level inputs. Available from global distributors with short lead times.

LINEAR TECHNOLOGY - LTC1693-2CS8#PBF - Dual MOSFET Driver, High Side And Low Side, 4.5V-13.2V Supply, 1.5A Out, 35ns Delay, SOIC-8

Analog Devices LTC1693-5CMS8#PBF is a single-output high-side MOSFET gate driver capable of sourcing and sinking 1.7A peak current, available in an 8-pin MSOP package. Ideal for fast switching power converters, synchronous rectifiers, and motor drive circuits requiring reliable gate charge delivery.

Digital to Analog Converters - DAC IC Quad 12-Bit VTG Output

Analog Devices LTC1693-3CMS8#TRPBF is a high-speed single MOSFET gate driver capable of sourcing and sinking 1.7 A peak output current, packaged in an 8-pin MSOP for space-constrained designs. It supports both high-side and low-side N-channel FETs with inverting and non-inverting input options. Available from stock worldwide with fast shipping.

INST Amp Single R-R I/O 5.5V Automotive 8-Pin MSOP T/R

LTC4079EDD#TRPBF is an Analog Devices low quiescent current 60V, 250mA linear battery charger IC for lithium-ion and lithium-polymer cells. It features an adjustable charge voltage threshold and operates from input voltages up to 60V, supporting solar and high-voltage adapter sources. Housed in a compact 10-pin DFN package for portable and industrial battery-powered product designs.

Analog Devices LTC3265MPDHC#PBF is an automotive-grade switched-capacitor charge pump regulator accepting 4.5 V to 16 V input and delivering inverting or step-up outputs up to ±32 V at 50 mA. Housed in an 18-pin DFN EP package, it generates dual-polarity rails for op-amp supplies and LCD bias in automotive and industrial systems.

Ultracompact, Precision 10.0 V/5.0 V/2.5 V/3.0 V Voltage References

Analog to Digital Converters - ADC Buffered Octal, 16-Bit, 200ksps Differential 10.24V Input SoftSpan ADC with Wide Input Common Mode Range

LDO Voltage Regulators 500mA VLDO

The LTC7000MPMSE#PBF is a high-side N-channel MOSFET gate driver from Analog Devices rated for up to 150 V, designed to drive static switch applications with fast switching and built-in protection. It features Schmitt-trigger inputs, open-drain outputs, and robust overvoltage and overcurrent protection circuitry in a 16-pin SOIC package. Ideal for hot-swap controllers, load switches, and ORing circuits in high-voltage power management systems.

The Analog Devices LTC6811HG-1#3ZZPBF is a 12-channel, Generation 4 multicell battery stack monitor IC with daisy-chain interface capability. It accurately measures cell voltages with 16-bit resolution and features isoSPI for noise-immune communication over long cable runs in high-voltage battery systems.

LT1034BCZ-1.2#PBF is a precision two-terminal 1.2 V voltage reference from Analog Devices with 20 ppm/°C maximum temperature coefficient, an auxiliary 7 V reference output, and a TO-92-3 package for accurate low-voltage ADC and DAC bias circuits. From $1.75, in stock, worldwide shipping.