Analog Devices

LDO Voltage Regulator 3.3V 3A DDPAK6

RS-232 Interface IC O.1UF LINE DRIVER - I.C.

Switching Voltage Regulators 2A Step-Down Switching Reg

LDO Voltage Regulators 3.3 - Micropower Low Dropout Regulators with Shutdown

LTC2979 is a 16-channel PMBus power system manager from Analog Devices, supporting low-voltage rails with programmable sequencing, margining, and fault management in a 144-ball BGA package for complex multi-rail systems.

ADI Sub 10M W ADC Driver for PULSAR Family

Analog to Digital Converters - ADC 16-BT Bipolar Pulsar ADC, 1000KSPS I.C.

The LT3462AEDC#TRMPBF is a current-mode inverting DC/DC converter delivering up to 300 mA output current at 2.7 MHz switching frequency. It operates from a 2.5 V to 16 V input supply and is available in an 8-lead DFN package for compact designs.

The LTC2862AHDD-1#PBF is a half-duplex RS-422/RS-485 transceiver IC with 60V fault protection, supporting data rates up to 20 Mbps. It features differential Schmitt trigger inputs and enable controls, making it suitable for industrial networks and long-distance serial communication.

Analog Devices LTC2862AHDD-2#PBF is a 60 V fault-protected, half-duplex RS-485 and RS-422 transceiver operating at up to 250 kbps with Schmitt-trigger inputs. It survives cable faults and bus contention up to ±60 V while maintaining EIA-485 compliance on a 3 V to 5.5 V supply. The 8-pin DFN package enables compact industrial communication node designs.

Switching Voltage Regulators Single Cell Hi Cur Boost Conv

LT3032IDE-5#PBF is a dual 200mA positive/negative low-dropout linear regulator with ultralow noise output. It operates from 2.3 V to 20 V input, delivering a fixed 5 V output with only 0.15 V typical dropout. Ideal for noise-sensitive analog and RF circuits requiring dual-rail supplies.

LT3023EDD#TRPBF is a dual low-dropout linear regulator from Analog Devices, providing adjustable output voltage from 1.22V to 20V with up to 100mA load current. It features ultralow dropout voltage of 0.3V typical and operates across an automotive-grade temperature range. Packaged in a compact 10-pin DFN, it suits space-constrained automotive and industrial power supply designs.

LTC1403ACMSE#PBF is a 14-bit, 2.8Msps serial-output ADC with a single analog input channel and 2.5V input range, delivering high-speed precision conversion for data acquisition and instrumentation applications.

LT1268CT#PBF is a current-mode switching regulator from Analog Devices delivering up to 7.5 A output current with a 3 V to 30 V input range. It suits high-current DC-DC conversion in telecom and industrial power supplies, offered in a TO-220-5 package. From $6.10, in stock, worldwide shipping.

Analog Devices LTC6269HMS8E#PBF is a dual, general-purpose, rail-to-rail output op-amp rated for automotive applications. It operates from ±2.625 V or 5.25 V supply with 4 fA typical bias current and 60 dB minimum CMRR. Available in 8-pin MSOP-EP package, in stock worldwide with fast shipping.

The LTC1296CCSW#PBF is an Analog Devices 12-bit successive-approximation ADC featuring 8 input channels with serial interface and simultaneous sample-and-hold, accepting analog inputs from -5.05 V to +5.05 V with a maximum conversion time of 12 µs. Packaged in a 20-pin SOIC for easy PCB integration, it suits industrial data acquisition and precision measurement systems.

Battery Management 200kHz, 1.5A Stepdn Bat Charger

Analog Devices LT8390AIUFD#PBF is an AEC-Q100 Grade 1 automotive current-mode PWM DC/DC controller supporting buck, boost, and buck-boost topologies with a 4 V to 60 V input range and up to 1430 kHz switching frequency in a compact 28-pin QFN-EP package. Available in stock with worldwide shipping.

LTC6269HMS8E#TRPBF is a dual, general-purpose, rail-to-rail output operational amplifier from Analog Devices, featuring ±2.625V/5.25V supply range, AEC-Q100 automotive qualification, and ultra-low 4 fA bias current in an 8-pin MSOP-EP package. From $4.50, in stock, worldwide shipping.

The LT1208CS8#PBF is a dual high-speed operational amplifier with 250 V/µs slew rate, voltage-feedback architecture, and 86 dB minimum CMRR. Suitable for signal processing applications. Available from stock worldwide.

BGA-28

LTC7801IFE#TRPBF is a high-voltage 150 V, low quiescent-current synchronous step-down DC/DC controller in 24-lead SSOP package. It uses current-mode PWM control for wide 4 V to 140 V input range and high efficiency. Suited for industrial, telecom, and automotive power conversion systems requiring robust regulation.

The Analog Devices LTM2881MPY-3 is a complete isolated RS-485/RS-422 µModule transceiver with integrated DC-DC converter in a 32-ball BGA package, supporting data rates up to 20 Mbps and 2500 V isolation. From $12.00 in stock worldwide shipping.

The LT3008IDC-3.3#TRMPBF is a 3.3 V fixed-output LDO linear regulator with 20 mA output current, ultra-low 3 µA quiescent current, and 0.3 V nominal dropout voltage, rated for input voltages up to 45 V in a 6-pin SOT-23 package.

The LT8711EUDC#PBF is a micropower synchronous multi-topology PWM switching controller from Analog Devices supporting 4.5 V to 42 V input, current-mode control, and flexible buck/boost/inverting configurations in a compact 20-pin QFN package for efficient DC/DC power conversion.

Digital Isolators Quad-CH w/ Intg DC/DC Converter

LTC1731EMS8-8.4#TRPBF is a 8 pins integrated circuit by Analog Devices. Key specs: 8 pins, Small Outline Packages package, Linear Battery Charger Controller Li-Ion/Li-Pol/NiCd/NiMH 2000mA 8.4V 8-Pin MSOP T/R. From quote-based sourcing, in stock checks support worldwide shipping.

LTC2946CMS-1#PBF is an Analog Devices 3-channel I2C energy monitor in a 16-pin MSOP package, measuring voltage, current, and power simultaneously with 12-bit resolution. It supports adjustable thresholds and accumulates energy over time, making it ideal for server power management and battery-life optimization. From $8.50 in stock with worldwide shipping.

Analog Comparators 7nS Low Power Dual R2R Comparator

The LTC1731EMS8-4.1#PBF is a linear battery charger controller for Li-Ion and Li-Polymer cells with 4.1 V regulation voltage, supporting up to 2000 mA charge current in a compact 8-pin MSOP package. Available from stock worldwide with fast shipping.

Boost/Inverting DC/DC Converter with 2A Switch, Soft-Start, and Synchronization

Analog Devices LT3580MPMS8E#PBF is a current-mode PWM boost/inverting DC-DC converter with a 2 A internal switch, soft-start, and synchronization in an MS8 package. Input voltage range spans 2.5 V to 32 V with adjustable output and switching frequency. Available from authorized distributors with worldwide shipping.

LT3580HMS8E#PBF is a current-mode PWM boost and inverting DC/DC converter by Analog Devices (Linear Technology) featuring a 2 A integrated switch, programmable soft-start, and synchronization, with input voltages from 2.5 V to 32 V. Key specs: 32 V max input, 2 A switch current, 8-lead SOIC package. From competitive pricing, in stock with worldwide shipping.

Boost/Inverting DC/DC Converter with 2A Switch, Soft-Start, and Synchronization

Analog Devices LTC4418IUF#PBF is a dual-channel prioritized power-path controller that automatically selects between two input supply sources based on adjustable voltage thresholds. It drives external P-channel MOSFETs to switch up to 2 power inputs with low dropout and precise threshold control. Ideal for redundant-power industrial systems, telecom equipment, and servers requiring seamless supply failover without interruption.

The LTM4608IV#PBF is an 8A DC/DC µModule power regulator with input voltage range of 2.375 V to 5.5 V, featuring tracking, margining, multiphase operation, and frequency synchronization in a compact BGA package.

The LTM4644EY-1#PBF is a quad-output, 4 A per channel step-down DC/DC µModule regulator from Analog Devices. It accepts a 4 V to 14 V input and delivers adjustable outputs from 0.6 V to 5.5 V with current-mode PWM control. Ideal for powering multi-rail FPGAs, ASICs, and DSPs in space-constrained designs.

CAN Interface IC 5kV isoPower Isoltd CAN-FD Transceiver

LT3020EMS8-1.8#PBF is a 100 mA very low dropout LDO regulator from Analog Devices with fixed 1.8 V output in an MS8 package. Input voltage range spans 2.1 V to 10 V with a maximum dropout of 285 mV at full load. Ideal for battery-powered portable designs requiring stable 1.8 V rails.

LT3991IMSE-5#PBF is a 55V, 1.2A step-down switching regulator with 2MHz switching frequency and ultra-low 2.8µA quiescent current, ideal for battery-powered and industrial applications requiring high efficiency.

LTC6090IFE-5#PBF is a single, precision, rail-to-rail output operational amplifier from Analog Devices rated for ±70V/140V supply, 126 dB minimum CMRR, and 1.25 mV max offset voltage in a 16-pin TSSOP-EP package. From $8.20, in stock, worldwide shipping.

The AD2S44-TM18B is a dual-channel synchro/resolver-to-digital converter IC from Analog Devices, offering up to 18-bit resolution with built-in test capability and a 26 V reference input, ideal for precision motion control and positioning systems.

Analog Devices LTC2864IDD-1#PBF is a full-duplex RS-422/RS-485 transceiver operating at up to 20 Mbps with ±60 V fault protection and differential Schmitt trigger inputs. Housed in a 10-pin DFN package for low-profile industrial and communications designs. Available from $4 in stock with worldwide shipping.

The LTC6655BHMS8-1.25#TRPBF is a precision 1.25 V voltage reference featuring ultra-low noise and tight output accuracy of 1.2496–1.2503 V. It integrates a single three-terminal reference in an SO-8 package. Available from stock with worldwide shipping.

LDO Voltage Regulators 300mA Low Noise LDO

Single Channel, 32-Position, I2C, ±8% Resistor Tolerance, Nonvolatile Digital Potentiometer

LDO Voltage Regulators Adj Low Dropout Pos VR 3A

Analog Devices LTC3588EDD-1#PBF is a piezoelectric energy harvesting PMIC with an integrated full-wave bridge rectifier and synchronous buck converter in a compact 10-pin DFN package. It accepts 2.7 V to 18 V from piezo transducers and provides selectable 1.8 V, 2.5 V, 3.3 V, or 3.6 V regulated output. Ideal for batteryless wireless sensor nodes harvesting mechanical vibration energy in IoT and industrial monitoring.

LT6203CMS8#PBF Analog Devices, Op Amp, RRIO, 90MHz 10 kHz, 3 V, 5 V, 8-Pin MSOP