Analog Devices

LDO Voltage Regulators 1.1A Adjustable, Single resistor LDO

The LT1991AIMS#PBF is a precision gain-selectable operational amplifier with 100 dB CMRR and a maximum bias current of 7.5 nA, packaged in an SOIC-8 form factor. It supports programmable gain configurations and is ideal for precision data acquisition, instrumentation amplifier, and signal conditioning applications.

100V Isolated Flyback Controller 16-Lead Plastic MSOP

Analog Devices LTC4315IDE#PBF is a 2-wire I2C/SMBus bus buffer with high noise margin, FAULT detection, and SBDR disable function. It supports I2C Fast Mode up to 400 kHz and operates in a compact 12-lead DFN package for industrial signal integrity.

Analog Devices LTC2067IMS8#TRPBF is a dual zero-drift operational amplifier with 10 µA supply current per channel and 35 pA maximum input bias current at 25°C. Featuring 123 dB typical CMRR and a voltage-feedback architecture in an 8-pin SOIC tape-and-reel package, it suits precision industrial and medical measurement designs demanding long-term DC accuracy.

Analog Devices LTC3875IUJ#PBF is a dual 2-phase synchronous buck controller with DCR sensing and temperature compensation operating from 4.5V to 38V input. It delivers adjustable output from 0.6V to 5V using current-mode PWM in a compact QFN package. Available from distributors worldwide.

Analog Comparators Comparator-CMl 13GHz

Switching Controllers Active Bias Controller 16 Lead 3x3 mm SMT Package: 9 mm²

The LT3489EMS8E#PBF is a 2.5A, 2MHz current-mode step-up DC/DC switching regulator from Analog Devices. It accepts input voltages from 2.6V to 16V and uses pulse width modulation for efficient power conversion. Packaged in an MS8E (MSOP-8) footprint, it suits compact power supply designs requiring high efficiency.

Analog Devices LT8643SIV-2#PBF is a high-efficiency synchronous step-down DC-DC converter with 42 V input and 7 A output capability using current-mode PWM control. Features external voltage compensation for flexible loop tuning across 3.4 V to 42 V input range. Available from stock worldwide with fast shipping.

Analog Devices LTM8023EV#PBF, DC-DC Power Supply Module 2A 36 V Input, 200 → 2400 kHz 50-Pin, LGA

LDO Voltage Regulators Fixed 5Vout 3A Low Dropout Regulators with Micropower Quiescent Current and Shutdown

LT8330EDDB#TRMPBF is a 1 A, 2 MHz low quiescent current boost and inverting DC-DC converter from Analog Devices, operating from 3 V to 40 V input. It supports SEPIC topology and uses current-mode PWM control in a compact DDB package for space-constrained power supply designs.

Analog Devices LTC7000EMSE#PBF is a fast 150V protected high-side NMOS static switch gate driver in a 16-pin MSOP package. It features Schmitt trigger inputs, open-drain output, and internal bootstrap charging for reliable high-voltage gate control. Suited for hot-swap controllers, solid-state relays, and high-voltage load switching applications.

The LT1490AHMS8#TRPBF is a dual Over-The-Top rail-to-rail input and output operational amplifier from Analog Devices, featuring 72 dB common-mode rejection ratio and a maximum input offset voltage of 3200 µV. Housed in an 8-pin MSOP package, it accepts common-mode inputs beyond the positive supply rail, making it ideal for high-side sensing and microprocessor supervisory circuits. Available in tape-and-reel, lead-free PBF format for automated assembly.

Analog Devices LTM8053EY#PBF is a 40V input, 3.5A/6A Silent Switcher step-down DC-DC µModule regulator with adjustable output from 0.97V to 15V using current-mode PWM control. It integrates inductor, MOSFETs, and passives into a compact BGA µModule package for low-EMI industrial and telecom power conversion.

Analog Devices LTC2296CUP#PBF is a dual-channel 14-bit 25 Msps low-power ADC in a 64-pin QFN package, offering simultaneous sampling with proprietary pipeline architecture and a 1 V differential analog input range. It delivers exceptional dynamic performance with 72 dB SNR and low 135 mW total power consumption at full speed. Available in stock from authorized distributors with worldwide shipping.

LTC2668HUJ-16#PBF is a 16-channel 16-bit SoftSpan DAC from Analog Devices with ±10 V output range and an integrated 10 ppm/°C maximum reference in a 40-pin QFN package. It uses a serial SPI interface with binary input coding for precision multi-channel voltage generation in industrial control and ATE systems. Available from stock with worldwide shipping.

LTC2946IDE#PBF is a high-voltage wide-range power monitor IC from Analog Devices, capable of measuring voltage, current, and power on rails from 2.7 V to 100 V with 12-bit resolution via an I2C/SMBus interface. It integrates 3 monitoring channels, adjustable alert thresholds, and energy accumulation registers in a compact 16-pin DFN-EP package. Ideal for server power management, automotive telematics, and industrial energy monitoring applications.

Supervisory Circuits Dual Supply Monitor with Selectable Polarity

LT1614IMS8#PBF is an Analog Devices inverting DC-DC converter generating negative outputs down to -24 V from a 0.92 V to 6 V input. It uses current-mode PWM control for fast transient response and stable regulation. Available in 8-pin MSOP package with worldwide shipping.

The LT1614IMS8#TRPBF is an automotive-grade inverting DC/DC switching regulator generating a single -24 V output from a 0.92 V to 6 V input using current-mode PWM control, housed in an 8-pin MSOP package for compact negative-rail generation in automotive and portable systems.

Linear Battery Charger Controller Li-Ion/Li-Pol/NiCd/NiMH 2000mA 4.2V 8-Pin MSOP Tube

Analog Devices LT1614CMS8 is a current-mode PWM inverting DC-DC converter that generates up to -24 V output from a 0.92 V to 6 V input supply. It uses an 8-pin MSOP package and integrates the switching transistor for compact negative rail generation. Available from stock worldwide in RoHS-compliant lead-free packaging.

The LTC3542ES6#TRMPBF is a synchronous step-down DC-DC converter from Analog Devices operating from 2.5 V to 5.5 V input and delivering an adjustable 0.6 V to 5.5 V output at up to 0.5 A in a 6-pin TSOT-23 package. It uses current-mode burst mode control for ultra-low quiescent current in battery-powered automotive and portable devices. Available worldwide for compact power management applications.

LT3797ELXE#PBF is a triple output LED driver controller IC from Analog Devices, supporting up to 6 LED segments per channel. It features wide input voltage range and high-efficiency PWM dimming control for demanding lighting applications.

The LT3094EMSE#TRPBF is a -20 V, 500 mA adjustable ultralow-noise negative LDO linear regulator from Analog Devices with a typical dropout voltage of only 235 mV and exceptional power-supply rejection ratio. It operates over a 2.3 V to 20 V input-output differential range in a 12-pin MSOP package. The device targets noise-sensitive analog and RF circuits, high-performance audio systems, and precision measurement instruments requiring a clean negative supply rail.

Analog Devices LTC1731EMS8-8.4#PBF is a linear battery charger controller supporting Li-Ion, Li-Pol, NiCd, and NiMH chemistries with up to 2000 mA charge current and 8.4 V termination voltage. It integrates adjustable threshold control in a compact 8-pin MSOP package. Available in tube packaging with RoHS-compliant lead-free finish for portable power designs.

LT8610AXMSE#TRPBF is an Analog Devices 42 V input, 3.5 A synchronous step-down switching regulator in a 16-pin MSOP-Exposed pad package with only 2.5 µA quiescent current in Burst Mode. It delivers high efficiency across a wide 3.2 V to 42 V input range, suiting automotive, industrial, and always-on IoT applications. From $6.80 in stock with worldwide shipping.

Supervisory Circuits Power Sequencer EN IC

The LTC4310CDD-2#PBF is an I2C hot-swap controller from Analog Devices supporting up to 400 kHz bus frequency in a 10-pin no-lead DFN package. It enables safe live insertion of I2C cards by eliminating bus lockup on card removal, making it essential for hot-pluggable modular system designs.

Analog Devices LTC4162IUFD-L42M#PBF is a 35 V / 3.2 A multicell lithium-ion step-down battery charger with integrated PowerPath management and I2C telemetry for real-time charge monitoring, housed in a compact 28-pin QFN package. Supports up to 4-series Li-ion cells for portable and industrial power designs. Available from authorized distributors with worldwide shipping.

Analog Devices LTC2963HUDC-1#PBF is a 0.5% accurate quad configurable voltage supervisor IC for multi-rail power sequencing and monitoring. It integrates four independently adjustable threshold channels in a compact QFN-20 package rated for H-grade extended temperature operation. Available with RoHS-compliant lead-free finish from authorized distributors worldwide.

Switching Voltage Regulators SOT-23 Boost Controller

Analog Devices LTM4608AIV#PBF is a low-VIN 8A DC/DC µModule regulator in an LGA-68 package, supporting 2.4 V to 5.5 V input and adjustable output from 0.6 V to 5 V with tracking, margining, and frequency synchronization features for multi-rail power systems.

LTC3632EMS8E#TRPBF is an Analog Devices automotive-grade synchronous step-down DC-DC converter with 4.5 V to 50 V input range and adjustable output from 0.8 V to 50 V at up to 20 mA. It uses hysteretic current-mode control in a compact 8-pin MSOP EP package. Available in tape-and-reel from authorized distributors with worldwide shipping.

The LT3020IDD#PBF is a 100 mA very low dropout linear voltage regulator from Analog Devices, featuring a maximum dropout voltage of only 285 mV at full load across the -40°C to +125°C industrial temperature range. It operates with input voltages as low as 1 V and is housed in an 8-pin DFN package for compact low-power designs. Designed for powering noise-sensitive analog and RF circuits in portable, battery-powered, and wearable applications.

The LTC4002EDD-8.4#PBF is a standalone linear Li-Ion battery charger IC by Analog Devices, designed for 2-cell packs with an 8.4 V charge voltage and up to 1.5 A charge current from a 22 V input. It integrates an adjustable threshold and complete charge control in a compact DFN-10 package. Suitable for portable devices and industrial battery management systems.

Analog Devices LTC4151HMS#PBF is an 80 V high-side power monitor IC with 1-channel current and voltage sensing, shutdown capability, and I2C interface, housed in a 10-pin MSOP package.

LTM8065IY#PBF is a 40V input, 2.5A Silent Switcher DC/DC step-down µModule regulator by Analog Devices, featuring ultra-low EMI and integrated inductor. Output voltage adjustable from 0.97V to 18V. Ideal for noise-sensitive industrial, communications, and instrumentation applications. From $8.50, in stock, worldwide shipping.

CAN Interface IC 5.7kV Isolated CAN-FD Transceiver

Analog Devices LT3020EDD#PBF is an ultra-low dropout linear regulator delivering 100 mA with 285 mV maximum dropout voltage. It operates over a -40°C to 125°C junction temperature range in an 8-pin DFN package. Suited for low-voltage always-on power rails in battery-powered and portable electronics.

The LTC4444IMS8E#PBF is an automotive-grade half-bridge MOSFET gate driver delivering 3 A peak output current with high-side and low-side drive capability in an 8-pin MSOP with exposed pad package. Key specs include Schmitt trigger inputs for noise immunity, non-inverting outputs, and AEC-Q100 automotive qualification for harsh-environment reliability. Ideal for synchronous buck converters, motor half-bridges, and other high-frequency switching applications in automotive and industrial systems.

2-Channel Dual ADC Pipelined 10Msps 12-bit Parallel 64-Pin QFN EP Tube

IC DSP 32BIT 333MHZ 136CSBGA

Analog Devices LTC2876HMS8E#PBF is a 60V fault-protected RS-485/RS-422 transceiver with PROFIBUS compatibility and differential Schmitt trigger inputs. It operates from 3V to 5V supply with full EIA-485 compliance in an 8-pin SOIC package. Designed for industrial fieldbus networks requiring robust noise immunity and cable fault tolerance.

Analog Devices LT1791AIS#PBF is a 60V DC, ±15kV ESD-protected RS-422/RS-485 half-duplex transceiver IC supporting industrial differential serial communication. Features differential Schmitt-trigger receiver inputs with failsafe for open, shorted, or terminated bus conditions. Available in a 14-pin SOIC package for robust multi-node industrial network designs.

Switching Voltage Regulators 400mA Synch, Boost Converter in SC70

Analog Devices ADF4355-3 is a wideband microwave PLL frequency synthesizer with integrated VCO covering 3.3 GHz to 6.6 GHz output frequency range, featuring fractional-N and integer-N modes with SPI control in a 40-pin QFN package. Ideal for local oscillator generation in microwave, radar, and wireless infrastructure equipment.

CAN Interface IC 5kV isoPower Isolated CAN-FD Transceiver