Analog Devices

Dual Precision Op Amp

RF Transceiver Integrated Dual RF

The LT1943EFE#PBF is a quad-output TFT LCD power supply controller from Analog Devices using current-mode PWM switching. It accepts 4.5 V to 22 V input and generates four regulated rails for display bias, gate drive, and backlight applications. Packaged in a 28-pin TSSOP, it streamlines power supply design for portable and industrial LCD panels.

LTC6269IMS8E-10#TRPBF is a dual precision voltage-feedback op-amp from Analog Devices in an 8-pin MSOP package, featuring rail-to-rail output, ±2.625 V to ±5.25 V supply range, 50 dB minimum CMRR, and sub-femtoampere bias currents for automotive and precision analog applications.

High Speed Operational Amplifiers 3GHz Low Noise/Low Distortion Differential Amp

Op Amp Dual GP R-R I/O ±22V/44V 8-Pin MSOP

Analog Devices LTC2000ACY-16#PBF is a high-speed 16-bit single-channel current-steering DAC capable of 2.5 GSPS output update rates in a 170-pin BGA package. Delivers a differential analog output of plus and minus 1 V with serial and parallel input interfaces. Available from stock with worldwide shipping.

The LT8711IFE#PBF is an automotive-grade single-output step-down/step-up DC/DC switching controller with current-mode PWM, 4.5 V to 42 V input range, 825 kHz switching frequency, housed in a 20-pin TSSOP EP package for wide-input automotive and industrial power conversion.

LT1268CQ#PBF is a high-current 7.5 A current-mode switching voltage regulator from Analog Devices with 150 kHz switching frequency and input voltage range 3 V to 30 V. It delivers high efficiency buck, boost, or inverting conversion in a 5-lead power package. Ideal for distributed power supplies, telecom boards, and industrial DC-DC converters. From $12.50 in stock with worldwide shipping.

7-Channel Single ADC Delta-Sigma 19.2ksps 24-bit Serial 32-Pin LFCSP EP Tray

The LTM2881HY-3 is a complete isolated RS-485/RS-422 µModule transceiver from Analog Devices, integrating an isolated data transceiver and DC/DC power converter in a 32-ball BGA package. It supports up to 20 Mbps data rates with 2500 V RMS isolation, making it ideal for industrial fieldbus, process control, and noise-sensitive communication networks.

LTC6269IMS8E#PBF is a dual precision op-amp with rail-to-rail output, ±2.625V/5.25V supply range, 500 MHz gain-bandwidth product, and ultra-low 0.002 µA bias current in an 8-pin MSOP package for automotive applications.

Analog Devices LTM2881HY-5 is an automotive-grade isolated RS-422/RS-485 single transceiver with differential Schmitt trigger input, integrated isolation, and 32-pin BGA package. Designed for robust bidirectional half-duplex serial communication in automotive and industrial environments with high noise immunity.

The LT3020IMS8-1.8#PBF is a low-dropout linear regulator delivering a fixed 1.8 V output at up to 100 mA, with an input range of 2.1 V to 10 V and a maximum dropout of 285 mV. Packaged in an 8-pin MSOP, it is AEC-Q100 qualified for automotive use and rated to 125 °C junction temperature.

The LTC4291IUF-1#PBF is a 4-port IEEE 802.3at/af Power over Ethernet (PoE/PoE+) PSE controller in a compact 24-pin QFN package. It manages up to 4 PoE ports simultaneously, providing detection, classification, and power management for powered devices.

RF Receiver 3V/5V 48-Pin LQFP T/R

LDO Voltage Regulators 300mA CMOS Low-Dropout Regular

RF IC Fractional- N Divider 0Hz ~ 7GHz Frequency Sweeper 32-QFN (5x5)

LDO Voltage Regulators Ultra Low Noise, High PSRR #Negative LDO

The Analog Devices LT5400BMPMS8E-1#PBF is a quad matched resistor network in an 8-pin MSOP-EP package, offering tight resistor ratio matching suitable for precision analog signal conditioning in automotive environments. Available worldwide with fast shipping.

LTC1261LCMS8-4.5#PBF is a switched-capacitor voltage inverter IC from Analog Devices, generating a fixed -4.5V output from a 5V input rail. It operates with an input voltage range of 4.75V to 5.25V and comes in a compact MSOP-8 package, ideal for space-constrained designs.

The LT1999MPMS8-10#TRPBF is a high-voltage bidirectional current sense amplifier from Analog Devices with a fixed gain of 10, 120 dB CMRR, and a wide common-mode input range, packaged in an 8-pin MSOP for precision power monitoring in automotive and industrial applications.

Analog Devices LTC6655BHMS8-5#TRPBF is an ultra-low noise, 5 V precision voltage reference in an 8-pin MSOP package, with output accuracy of 4.9987 V to 5.0012 V. It delivers sub-2 µVpp noise from 0.1 Hz to 10 Hz and excellent long-term stability for high-precision ADC and DAC applications. Ideal for precision instrumentation, data acquisition systems, and calibration equipment demanding tight reference accuracy.

The LTC1992-10IMS8#TRPBF is a fully differential amplifier from Analog Devices with rail-to-rail output, ±5.5 V supply range, 60 dB CMRR, and automotive-grade qualification in an 8-pin MSOP package, suited for precision signal conditioning in harsh environments.

LT3463EDD#TRPBF is a dual micropower DC/DC converter from Analog Devices featuring integrated Schottky diodes for boost and inverting configurations. It accepts input voltages from 2.4 V to 15 V and uses constant off-time voltage-mode control. Available in a compact 10-pin DFN package for space-constrained designs.

Differential Amplifiers Low Noise SAR ADC Driver?Single-Ended to Differential Converter

LTC2162IUK#PBF is a 16-bit, 65 MSPS low-power ADC from Analog Devices operating from a 1.8 V supply with parallel output interface and a maximum linearity error of only 0.0092%. It accepts a differential analog input from -2 V to 2 V in a 48-pin QFN package for high-speed signal digitization. Available from stock with worldwide shipping.

Switching Voltage Regulators 58VIN, 6A CVCC Buck Module Reg

LT6350CDD#PBF is a low-noise differential amplifier and SAR ADC driver from Analog Devices in a small outline no-lead package, converting single-ended inputs to differential outputs with minimal noise for high-resolution 12-bit to 18-bit ADC interface applications.

The LT1814CS#PBF is a quad 100 MHz voltage-feedback operational amplifier from Analog Devices offering 3.6 mA supply current per amplifier. Featuring 85 dB common-mode rejection ratio and 5 µA maximum bias current, it suits precision high-speed signal processing.

DAC 4-CH Resistor-String 12-bit 16-Pin TSSOP T/R

LT3958IUHE#PBF is a high input voltage current-mode switching regulator IC from Analog Devices supporting boost, flyback, SEPIC, and inverting topologies. It operates from 5 V to 80 V input with a programmable switching frequency of 100 kHz to 1 MHz. Ideal for industrial power supplies, automotive systems, and wide-input-range DC-DC conversion applications.

RF Amplifier lo Noise amp SMT, 14 - 27 GHz

LTC2851IMS8#TRPBF is a 3.3 V full-duplex RS-485/RS-422 transceiver by Analog Devices supporting data rates up to 20 Mbps with differential Schmitt-trigger receiver inputs for high noise immunity. Housed in an 8-pin MSOP package, it is rated for industrial -40°C to +85°C operation and drives bus networks with up to 32 unit loads. Available from stock with worldwide shipping.

Digital to Analog Converters - DAC 16-bit 12GSPS RF DAC w/3GSPS Channel

Linear Battery Charger Li-Ion/Li-Pol 800mA 4.2V 5-Pin TSOT-23 T/R

ANALOG DEVICES - HMC618ALP3ETR - RF AMP, 19DB, 1.2-2.2GHZ, 5V, QFN-16

Digital to Analog Converters - DAC 2x 16-B R2R DACs in 8-Lead MS

Battery Management ULP Boost CHG SIDO & FCHG LLD 300mA

Dual-core SHARC+ and Arm Cortex-A5 SOC, DDR, Ethernet, USB, 349-cspBGA

Analog Devices LTC4012IUF#PBF is a high-efficiency multi-chemistry battery charger IC in a QFN package, supporting 6 V to 28 V input with adjustable 2 V to 28 V output, PWM current-mode control, and PowerPath management for portable and industrial charging designs.

AD9834 is a Analog Devices integrated circuit for industrial and embedded electronics. It provides 20 pins, Small Outline Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.

LDO Regulator Pos 5V 0.3A Automotive 8-Pin MSOP T/R

The LT3032IDE-3.3#PBF is a dual 200mA positive/negative low-dropout linear regulator from Analog Devices. It delivers a fixed 3.3 V output with ultralow noise and 150 mV typical dropout voltage, supporting 2.3 V to 20 V input range. Ideal for noise-sensitive analog, RF, and medical instrumentation circuits requiring clean, dual-rail supplies.

LDO Voltage Regulators 500mA 20V LDO 3.3V

The LTC2602CMS8 is a dual-channel 16-bit digital-to-analog converter in an 8-pin MSOP package, featuring serial SPI interface, rail-to-rail output up to 5.5 V, and guaranteed monotonicity for precision signal generation and calibration applications.

The LT1962EMS8-3#TRPBF is a low-dropout linear regulator delivering a fixed 3 V output at up to 300 mA with a typical dropout of only 270 mV. It accepts an input voltage range of 3.5 V to 20 V and is available in a compact 8-pin MSOP package with RoHS-compliant, lead-free construction.

The LT6108AIMS8-1 is a high-side current sense amplifier with integrated reference and comparators, featuring 125 dB CMRR, 250 µV max offset voltage, and 0.3 µA bias current. Ideal for precision power monitoring and battery management in industrial and automotive systems. Available from stock worldwide.

LDO Voltage Regulators Fast Transient 3A LDO

Dual-Channel Isolators with isoPower® Integrated DC/DC Converter, 50 mW (1/1 channel directionality)