LTC2296CUP#PBF Analog Devices Integrated Circuit (Quad Flat No-Lead) In Stock
Analog Devices LTC2296CUP#PBF is a dual-channel 14-bit 25 Msps low-power ADC in a 64-pin QFN package, offering simultaneous sampling with proprietary pipeline architecture and a 1 V differential analog input range. It delivers exceptional dynamic performance with 72 dB SNR and low 135 mW total power consumption at full speed. Available in stock from authorized distributors with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Quad Flat No-Lead
- Pin Count
- 64
- Lifecycle
- ACTIVE
- Datasheet
- LTC2296CUP#PBF Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual-channel simultaneous 14-bit sampling at 25 Msps captures two independent analog signals with matched phase and gain for I/Q or differential applications
- Low 135 mW total power consumption at full 25 Msps rate reduces thermal management complexity in multi-channel acquisition systems
- 72 dB SNR and 86 dBc SFDR deliver wide dynamic range essential for communications receivers and precision instrumentation
Applications
The LTC2296CUP#PBF is optimized for dual-channel data acquisition systems in communications receivers, software-defined radio (SDR) front ends, and medical imaging equipment requiring simultaneous I/Q capture at 25 Msps. Its low 135 mW power budget makes it suitable for portable test instruments and battery-powered field analyzers where thermal dissipation is constrained. The 64-pin QFN package enables compact PCB layouts in multi-ADC array designs targeting wideband signal processing at up to 12.5 MHz bandwidth per channel.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1705 |
| YTEOL | 10 |
| Analog Input Voltage-Max | 1V |
| Analog Input Voltage-Min | -1 V |
| Converter Type | ADC, PROPRIETARY METHOD |
| JESD-30 Code | S-PQCC-N64 |
| JESD-609 Code | e3 |
| Linearity Error-Max (EL) | 0.0305% |
| Number of Analog In Channels | 1 |
| Number of Bits | 14 |
| Number of Functions | 2 |
| Output Bit Code | OFFSET BINARY, 2S COMPLEMENT BINARY |
| Output Format | PARALLEL, WORD |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | LCC64,.35SQ,20 |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Sample Rate | 25MHz |
| Sample and Hold / Track and Hold | SAMPLE |
| Supply Voltage-Nom | 3V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | COMMERCIAL |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Quad Flat No-Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | 3A991.C.3 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What SNR and SFDR performance can designers expect from the LTC2296CUP#PBF at 25 Msps?
The LTC2296CUP#PBF achieves approximately 72 dB SNR and 86 dBc SFDR at 25 Msps with a 1 V differential input range. These figures make it suitable for communications receivers and spectrum analyzers that demand wide dynamic range over 14-bit resolution. Both channels sample simultaneously, preserving phase coherence between I and Q paths to within sub-nanosecond aperture mismatch.
How does the LTC2296CUP#PBF's power consumption compare when targeting a portable multi-channel acquisition design?
At full 25 Msps operation, the LTC2296CUP#PBF draws approximately 135 mW total for both channels from a 3.3 V supply, or about 67.5 mW per channel. This is significantly lower than comparable 14-bit dual ADCs of its generation, enabling 4- to 8-channel acquisition arrays running from a 1 W power budget on compact portable instruments without requiring active cooling.
Is the LTC2296CUP#PBF a suitable replacement for the LTC2190 in a 14-bit imaging application?
The LTC2296CUP#PBF targets 25 Msps at 14-bit resolution while the LTC2190 series supports up to 25 Msps with similar resolution but differs in pin count and interface options. For a direct swap, the designer must verify the 64-pin QFN footprint (PQCC-N64), the LVDS or parallel output interface compatibility, and the 1 V differential input voltage range against the existing circuit before treating them as interchangeable.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”