LT3020EDD#PBF Analog Devices Integrated Circuit (Small Outline No-lead) In Stock

Analog Devices LT3020EDD#PBF is an ultra-low dropout linear regulator delivering 100 mA with 285 mV maximum dropout voltage. It operates over a -40°C to 125°C junction temperature range in an 8-pin DFN package. Suited for low-voltage always-on power rails in battery-powered and portable electronics.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LT3020EDD#PBFSmall Outline No-lead
Quick Facts
Manufacturer
Analog Devices
Package
Small Outline No-lead
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $2.7400(MOQ 1)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Ultra-low 285 mV maximum dropout voltage at 100 mA enabling operation from near-depleted lithium-ion cells
  • 100 mA output current over -40°C to 125°C operating temperature range for industrial and automotive applications
  • 8-pin DFN package with exposed thermal pad providing low thermal resistance in a 3 mm x 3 mm footprint
  • Single-function LDO topology minimizing quiescent current for always-on supply rails in portable battery devices

Applications

The LT3020EDD#PBF is ideal for powering low-voltage microcontroller and sensor supply rails in portable medical devices, IoT nodes, and handheld instruments where the battery voltage closely approaches the regulated output voltage. Its 285 mV dropout allows continued operation even when a lithium-ion cell discharges below 3.3 V, extending usable battery run time. Industrial sensor transmitters operating over the -40°C to 125°C temperature range also benefit from this LDO's stable regulation across harsh thermal environments.

Specifications

Pbfree CodeNo
Manufacturer Package Code05-08-1698
YTEOL10
Dropout Voltage1-Max0.285V
JESD-30 CodeS-PDSO-N8
JESD-609 Codee3
Number of Functions1
Operating Temperature TJ-Max125°C
Operating Temperature TJ-Min-40 °C
Output Current1-Max0.1A
Output Voltage1-Max9.5V
Output Voltage1-Min0.2V
Package Body MaterialPLASTIC/EPOXY
Package ShapeSQUARE
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Regulator TypeADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR
Surface MountYES
TechnologyBIPOLAR
Terminal FinishMatte Tin (Sn) - annealed
Terminal FormNO LEAD
Terminal Pitch0.5mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
PackageSmall Outline No-lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginMalaysia

Datasheet

LT3020EDD#PBF Datasheet Download

Official datasheet from Analog Devices

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the dropout voltage of LT3020EDD#PBF and how does it affect battery-powered system design?

LT3020EDD#PBF has a maximum dropout voltage of 285 mV at 100 mA output current, meaning it can maintain regulation when the input supply is only 285 mV above the output. For a 3.3 V output rail powered by a lithium-ion battery, the regulator stays in regulation until the cell voltage drops to approximately 3.585 V, extending usable battery life compared to a standard 500 mV dropout LDO by 15 to 20 minutes per charge cycle.

What operating temperature range does LT3020EDD#PBF support for industrial sensor applications?

LT3020EDD#PBF is rated for junction temperatures from -40°C to 125°C, covering the full industrial temperature range specified by IEC 60068-2. This makes it suitable for outdoor sensor transmitters, automotive interior modules, and factory floor measurement instruments that experience both cold winter startup at -40°C and high ambient temperatures near heat-generating equipment exceeding 85°C ambient.

How does the 8-pin DFN package of LT3020EDD#PBF benefit compact PCB power rail designs?

The 8-pin DFN package occupies a 3 mm x 3 mm PCB footprint with an exposed thermal pad on the bottom, enabling low junction-to-board thermal resistance typically below 40°C/W. This compact thermal footprint allows the 100 mA LDO to dissipate up to 500 mW within a small power section, making it suitable for densely populated boards in wearable devices and miniature IoT sensor nodes.

When is LT3020EDD#PBF a better choice than a switching buck converter for a 100 mA supply rail?

LT3020EDD#PBF is preferable to a buck converter when the input-to-output voltage difference is less than 500 mV, eliminating the switching efficiency advantage of a converter and avoiding the EMI generated by 1 MHz to 2 MHz switching. For a 3.6 V input to 3.3 V output supply providing 100 mA, the LDO dissipates only 30 mW while avoiding inductor, diode, and filter capacitor BOM, saving 4 to 5 components and 20 mm² of PCB area.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $2.7400
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$6.0000$6.00
3+$5.0000$15.00
6+$4.4000$26.40
10+$4.2470$42.47
19+$3.0600$58.14
500+$2.7400$1370.00
pcs
Unit price: $6.0000 · Total: $6.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India