Analog Devices

The LTC3807IFE#PBF is an automotive-grade single-output synchronous step-down DC/DC controller from Analog Devices, operating from 4V to 38V input with a programmable output voltage range of 0.8V to 24V at 750 kHz switching frequency. It uses current-mode PWM control for fast transient response and accurate current limiting in a 20-pin TSSOP with exposed pad package. Qualified for automotive applications requiring a wide input range and compact surface-mount form factor.

Variable Gain Amplifier IC Signal Processing 8-LFCSP (3x3)

Switching Voltage Regulators Primary Side Controller

The LT6108AHMS8-1 is a high-side current sense amplifier with an integrated reference and comparators, offering 125 dB CMRR and 250 µV max input offset voltage. It operates from 2.5 V to 18 V and is housed in an MSOP-8 package for compact power monitoring designs.

RS-485 Interface IC 3.3V Ultralow Pwr RS485 Tran

The LTC1655LIS8#PBF is a 16-bit serial-input digital-to-analog converter from Analog Devices with a 2.5 V analog output, binary-coded serial input, and low linearity error of 0.03%, ideal for precision calibration, instrumentation, and programmable reference applications.

The LT1460FCMS8-10#PBF is a precision 10 V voltage reference from Analog Devices in an 8-pin MSOP package. It delivers a tightly regulated output between 9.985 V and 10.0015 V with 40 mA output current capability. Suited for high-accuracy data acquisition systems, calibration equipment, and precision measurement instrumentation.

Gate Drivers Fast 150V High Side NMOS Static Switch Driver

Analog Devices LT8390HFE#PBF is a 60 V synchronous 4-switch buck-boost controller with spread spectrum and current-mode control. Accepts 4 V to 60 V input and delivers regulated output across a wide voltage range for demanding power applications. Available in 28-pin SSOP package from stock worldwide.

The Analog Devices LTC7001EMSE#TRPBF is a fast 150 V high-side N-channel MOSFET gate driver for static switch applications, featuring Schmitt trigger inputs and push-pull output in a 10-pin MSOP package. It drives high-side NMOS transistors in hot-swap, load switch, and power multiplexing circuits with a single-function push-pull output. Suitable for telecom power switching, industrial load protection, and high-voltage bus switching designs.

High Speed Operational Amplifiers 4x Decomp L N, Hi Speed Prec Op Amps

3 kV rms, Signal and Power Isolated, CAN Transceiver for CAN FD

Switching Voltage Regulators [Tin-Lead SnPb BGA] 36V, 3A Step-down Module Regulator

1.2 A, Ultralow Noise, High PSRR, Fixed Output, RF Linear Regulator

RF MODULATOR 100MHZ-4GHZ 48VFQFN

Supervisory Circuits Dual Supply Monitor with Selectable Polarity

The ADV7623BSTZ-P-RL is a high-definition HDMI 1.4 repeater IC from Analog Devices, combining an HDMI receiver and transmitter supporting resolutions up to 1080p60 and 3D video formats. It integrates HDCP copy protection, EDID management, and CEC in a 144-pin LQFP package.

Dual-phase dual-output non-synchronous boost controller supporting input voltages from 5.5 V to 60 V with current-mode pulse-width modulation. Designed for high-voltage industrial power conversion applications. Available in small outline package with nominal 12 V operation.

Linear Battery Charger Controller Li-Ion/Li-Pol/NiCd/NiMH 2000mA 8.2V 8-Pin MSOP T/R

LT3580MPMS8E#TRPBF is a current-mode boost and inverting DC/DC converter from Analog Devices with a 2 A internal switch, input range of 2.5 V to 32 V, and soft-start plus synchronization in an 8-pin MSOP package. It supports both boost and SEPIC topologies. From $5.80, in stock with worldwide shipping.

The LT6000CDCB#TRMPBF is a precision operational amplifier from Analog Devices operating on a 1.8V supply with 1 mV maximum input offset voltage, 82 dB CMRR, and 10 µA supply current, suited for portable and battery-powered sensor signal conditioning applications.

Switching Voltage Regulators Dual 50A, Single 100A M Reg

LDO Regulator Pos 1.22V to 20V 0.3A Automotive 8-Pin MSOP

LDO Regulator Pos 1.5V 0.3A Automotive 8-Pin MSOP

Driver 2.4A 1-OUT High Side Full Brdg Non-Inv 8-Pin MSOP EP

ADUM3210WBRZ Analog Devices, PCB SMT, 2-Channel Digital Isolator 10MBps, 2.5 kVrms, 8-Pin SO

Switching Voltage Regulators Triple 800mA Synchronous Buck Converter in QFN

IC LED BYPASS SWITCH 28TSSOP

LT3965EFE#PBF is an 8-channel automotive-grade LED display driver IC from Analog Devices in a 28-pin TSSOP-EP package. It supports 3.3 V to 24 V supply voltages with serial data interface and constant-current LED control for segment displays. Available from stock with worldwide shipping.

LDO Regulator Pos 1.8V 0.3A Automotive 8-Pin MSOP

Interface - Signal Buffers, Repeaters 2-Wire Bus Buffer

LDO Regulator Pos 2.5V 0.3A Automotive 8-Pin MSOP

Controller 5V to 24V Automotive 20-Pin TSSOP EP Tube

Switching Voltage Regulators 4.5A 500kHz Stepdown Sw Reg

Differential Amplifiers L Pwr, Fully Diff In/Out Amp/Drvr Fam

Current Sense Amplifiers High Side Current Sense Amplifier with Reference and Comparators

Audio Bus Transceiver

Interface - Signal Buffers, Repeaters Hot Swappable 2-Wire Bus Bufs

LTC1992-5CMS8#TRPBF is a fully differential input/output operational amplifier from Analog Devices with a fixed gain of 5, featuring a 60 dB common-mode rejection ratio and 2500 µV maximum input offset voltage in an MSOP-8 package. It simplifies driving differential ADC inputs and balanced signal processing circuits. Available in tape-and-reel packaging from global distributors.

LT1965IMS8E-2.5#PBF is a fixed 2.5 V automotive-grade low-dropout linear regulator from Analog Devices, delivering up to 1.1 A output current with a typical 310 mV dropout voltage. It accepts input voltages from 3.5 V to 20 V and is rated for automotive applications in a compact 8-pin MSOP with exposed pad. Ideal for precision reference supplies, automotive ECU rails, and noise-sensitive analog circuitry requiring a stable 2.5 V rail.

LDO Regulator Pos 1.2V to 19.5V 1.1A Automotive 8-Pin MSOP EP T/R

LDO Voltage Regulators 1.1A Low Noise, LDO Regulator

Analog Devices LT1965IMS8E-1.8 is a fixed 1.8V, 1.1A LDO linear regulator rated for automotive use with a low 310mV typical dropout voltage and 2.8V to 20V input range. Packaged in an 8-pin MSOP with exposed pad for improved thermal performance. Available from stock with worldwide shipping.

The LTC4310IDD-2#TRPBF is a hot-swappable I2C bus isolator from Analog Devices, supporting two I2C/SMBus segments at up to 400 kHz. It features active back-driving prevention and stuck-bus recovery in a compact 10-pin DFN package.

The LTC3108EDE#PBF is an ultralow voltage step-up converter and power manager capable of harvesting energy from inputs as low as 20 mV. It provides regulated output voltages of 2.35V, 3.3V, 4.1V, or 5V for powering wireless sensor nodes. Available in a 12-pin DFN package with RoHS-compliant construction for energy harvesting designs.

LT8650SEV#PBF is a dual synchronous step-down DC-DC converter from Analog Devices supporting 3 V to 42 V input and delivering up to 5 A per channel with current-mode PWM control. It integrates two independent buck regulators in a compact 32-lead package, targeting automotive, industrial, and multi-rail embedded power supplies.

The LTC5564IUD#PBF is an Analog Devices wideband RF power detector covering 600 MHz to 15 GHz in a 16-lead QFN package. It delivers fast envelope detection and RF power measurement for dynamic range control and transmission monitoring in microwave systems. Available in stock worldwide for radar, 5G, and point-to-point radio applications requiring wide bandwidth detection.

Low IQ, 38V Synchronous Boost+Buck Controller

LT3478IFE-1#PBF is a high-current boost LED driver capable of 4.5A output at up to 42V, switching at 2.25 MHz with True Color PWM dimming. It delivers precise LED current control in a 16-pin SSOP package. Available from stock worldwide with competitive pricing.

IC OPAMP GP 4 CIRCUIT 14DIP