LT1965IMS8E-1.8#PBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock

Analog Devices LT1965IMS8E-1.8 is a fixed 1.8V, 1.1A LDO linear regulator rated for automotive use with a low 310mV typical dropout voltage and 2.8V to 20V input range. Packaged in an 8-pin MSOP with exposed pad for improved thermal performance. Available from stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LT1965IMS8E-1.8#PBFSmall Outline Packages
Quick Facts
Manufacturer
Analog Devices
Package
Small Outline Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $3.1100(MOQ 19)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Fixed 1.8V output with 1.1A continuous current and only 310mV typical dropout voltage suits low-headroom automotive power rails
  • AEC-Q100 automotive qualification and 2.8V to 20V input range cover a wide range of 12V vehicular and industrial supply conditions
  • 8-pin MSOP with exposed pad (EP) enables compact PCB footprint with enhanced thermal dissipation without a large heatsink

Applications

The LT1965IMS8E-1.8 is designed for automotive ECU subsystems and ADAS modules that require a stable, low-noise 1.8V rail from a 12V car battery or boost converter, where the low 310mV dropout voltage maximizes efficiency near end-of-charge battery conditions. Its 1.1A output current comfortably powers microcontrollers, FPGAs, and DSP cores operating at 1.8V supply rails in space-constrained control modules. Industrial designs such as 24V bus-powered sensor nodes and fieldbus interfaces also benefit from the wide 20V input tolerance and automotive-grade reliability.

Specifications

Pbfree CodeNo
Manufacturer Package Code05-08-1662
YTEOL10
AdjustabilityFIXED
Dropout Voltage1-Max0.49V
Dropout Voltage1-Nom0.31V
Input Voltage Absolute-Max22V
Input Voltage-Max20V
Input Voltage-Min2.8V
JESD-30 CodeS-PDSO-G8
JESD-609 Codee3
Line Regulation-Max0.01%
Load Regulation-Max0.024%
Number of Functions1
Number of Outputs1
Operating Temperature TJ-Max125°C
Operating Temperature TJ-Min-40 °C
Output Current1-Max1.1A
Output Voltage1-Max1.854V
Output Voltage1-Min1.746V
Output Voltage1-Nom1.8V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP8,.19
Package ShapeSQUARE
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Regulator TypeFIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Screening LevelAEC-Q100
Surface MountYES
TechnologyBIPOLAR
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Voltage Tolerance-Max3%
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginMalaysia

Datasheet

LT1965IMS8E-1.8#PBF Datasheet Download

Official datasheet from Analog Devices

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How low is the dropout voltage of the LT1965IMS8E-1.8 and why does it matter for 12V automotive designs?

The LT1965IMS8E-1.8 has a typical dropout voltage of 310mV at 1.1A, with a maximum of 490mV. In a 12V automotive system stepping down through multiple rails, a low dropout allows the regulator to maintain a clean 1.8V output even when the upstream supply sags to near 2.1V during cold-crank or load-dump events.

What input voltage range can the LT1965IMS8E-1.8 handle across automotive and industrial supply conditions?

The device accepts input voltages from 2.8V minimum up to 20V maximum, with an absolute maximum rating of 22V. This wide range covers standard 12V automotive batteries, boosted 15V rails, and 24V industrial bus supplies stepped down through a pre-regulator stage.

For a compact ADAS sensor board, how does the 8-pin MSOP EP package help manage thermal dissipation at full load?

At 1.1A output from a 5V input to 1.8V output, the LT1965IMS8E-1.8 dissipates approximately 3.6W. The exposed pad on the MSOP-8 EP package transfers heat directly to the PCB copper plane, achieving a junction-to-board thermal resistance that keeps the die below its 125°C maximum with adequate copper fill, without requiring a discrete heatsink.

Is the LT1965IMS8E-1.8 a suitable alternative to the LT1963 when pin count and output current requirements are similar?

Yes. Both devices deliver over 1A from a low-dropout architecture. The LT1965 series offers the automotive-grade qualification and MSOP-8 EP packaging that the standard LT1963 in SOT-223 does not provide, making LT1965IMS8E-1.8 the preferred choice when AEC-Q100 compliance or the smaller 8-pin MSOP footprint is a design requirement.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $3.1100
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
19+$4.1200$78.28
250+$3.4950$873.76
500+$3.3750$1687.50
1000+$3.1100$3110.00
pcs
Unit price: $4.1200 · Total: $78.28

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India