Analog Devices

LDO Regulator Neg -1.22V to -20V 0.2A Automotive 8-Pin DFN EP T/R

IC TXRX RS-485 8-DIP

RS-485 Interface IC 15kV ESD-Protected, 60V Fault-Protected, 10Mbps, Fail-Safe RS-485/J1708 Transceivers

LDO Voltage Regulators 200mA L/N Negative LDO in Thin SOT

LDO Voltage Regulators Fast Transient 3A LDO

LDO Voltage Regulators Fast Transient 3A LDO

MAXIM INTEGRATED PRODUCTS - MAX1557ETB+T - DC-DC Switching Sync-Buck (Step Down)Regulator, Adj, 2.6V-5.5Vin, 1V-1.5V/600mA out, 1 MHz, TDFN-10

Analog Devices LTC4060EDHC#PBF is a standalone 2 A NiMH/NiCd battery charger IC in 16-pin DFN package with adjustable charge termination and automatic cell-count detection. Designed for portable electronics and rechargeable tool battery management systems.

The LTC4410ES6#TRMPBF is an Analog Devices USB power manager and battery management IC in a SOT-23-6 package that controls USB power delivery and Li-Ion charging with adjustable threshold for single-channel portable systems. It simplifies USB-powered designs by managing power path switching and current limiting between a USB input and a battery.

RS-422/RS-485 Interface IC +/-15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-Limited RS-485/RS-422Transceivers in a SOT

Analog Devices LT8606BEDC#TRMPBF is a 42 V input, 350 mA synchronous step-down switching regulator with ultra-low 2.5 µA quiescent current for battery-powered designs. It uses current-mode PWM control in a compact SOT-23-style no-lead package. Available from authorized distributors with worldwide shipping.

Power Management Specialised - PMIC IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

Power Switch ICs - POE / LAN PoE 13W Quad PSE Controller

RF Receiver 315MHz/433MHz ASK Superheterodyne Rec

Triple 128-Position Nonvolatile Digital Potentiometer

RF Receiver 315MHz/433MHz ASK Superheterodyne Receiver with AGC Lock

The LTC6406IMS8E#TRPBF is an 800 MHz rail-to-rail input differential amplifier and ADC driver from Analog Devices with low noise and 65 dB typical CMRR in an 8-pin MSOP package. It operates on a single supply down to 2.7 V and drives high-speed ADCs with excellent common-mode rejection. Available from stock worldwide for communications, instrumentation, and data acquisition designs.

The LTC6406CMS8E#PBF is an 800 MHz rail-to-rail input differential amplifier and driver from Analog Devices with low noise and voltage-feedback architecture. It delivers 50 dB minimum CMRR and 3.5 mV maximum offset voltage in a compact MSOP-8 package. Available in stock worldwide for high-speed signal chain applications.

Analog Devices LTC6406IMS8E#PBF is an 800 MHz low-noise rail-to-rail input differential amplifier and ADC driver with 65 dB typical CMRR and 3.5 mV maximum input offset voltage in an MSOP-8 package. Optimized for driving high-speed ADC inputs and differential signal processing in communication and instrumentation systems.

SOT-223, 4 PIN

MAX17498BATE+TCER is a Analog Devices 17-position voltage regulator for reliable PCB assembly and replacement sourcing. It uses a Quad Flat No-Lead format with documented specifications for engineering review. Request quote-based stock, lifecycle support, and worldwide.

Precision Amplifiers 200V Precision Amplifier

LTC6655BHMS8-2.048#TRPBF is an ultra-low-noise 2.048 V precision voltage reference from Analog Devices with an output accuracy band of 2.0474 V to 2.0485 V and a noise density below 2 µV peak-to-peak. It delivers a stable reference for 16-bit and 18-bit ADC and DAC circuits in an MSOP-8 package. Available from stock worldwide with fast shipping.

Analog Devices LTC6655BHMS8-4.096#TRPBF is a 4.096V ultra-low-noise precision voltage reference in an 8-pin MSOP package with output accuracy from 4.0949V to 4.097V. It targets high-resolution ADC/DAC reference designs demanding sub-1 ppm/°C drift.

LTC6655BHMS8-2.048 is a precision 2.048 V voltage reference IC from Analog Devices with ultra-low noise and high accuracy in an MSOP-8 package. It delivers 0.05% initial accuracy and 2 ppm/°C temperature coefficient for demanding ADC and DAC reference applications. Available from stock worldwide with fast global shipping.

Analog Devices LTC2512IDKD-24#PBF is a 24-bit successive-approximation ADC with configurable digital filter, accepting analog inputs from -2.5 V to 5.1 V with a maximum conversion time of 0.46 µs. Packaged in a 24-lead small-outline no-lead (SON) package. Available in stock worldwide with fast shipping.

Analog Devices LTC3388EMSE-3#PBF is a high-efficiency hysteretic current-mode step-down switching regulator accepting 2.7 V to 20 V input and delivering a fixed 3 V output at up to 50 mA, with an ultralow quiescent current below 1 µA ideal for battery-powered IoT and wearable applications.

Voltage References Ultra Low Noise, 3V Precision Voltage Reference

The LTC6655BHMS8-2.5#PBF is an ultra-low noise 2.5 V precision voltage reference from Analog Devices, packaged in an 8-pin MSOP with output accuracy between 2.4993 V and 2.5006 V. It delivers exceptional DC precision and low noise for high-resolution ADC references, precision DAC supplies, and metrology-grade instrumentation designs.

Analog Comparators Ultra-Low-Power, Open-Drain, Single/Dual-Supply Comparators

Analog Devices MAX5491WC30000+T is a precision-matched resistor-divider network with 300 kΩ total resistance, 0.1% ratio accuracy, and 5 ppm/°C tracking TCR in a compact SOT-23 package. Available from stock with worldwide shipping.

MAXIM INTEGRATED PRODUCTS - MAX982ESA+ - Analogue Comparator, Low Voltage, Micropower, 2 Comparators, 12 µs, 2.5V to 11V, ± 1.25V to ± 5.5V

LTC3586EUFE-1#PBF is a high-efficiency USB power manager with dual buck converters, one boost converter, and a buck/boost converter from Analog Devices, housed in a compact 38-pin QFN package. It integrates 4 DC/DC channels plus battery charger management for portable USB-powered devices. Available in stock worldwide with competitive pricing.

Dual, FAST, Accurate Step-Down DC/DC Controller with Differential Output SENSING

Switching Voltage Regulators ADJ Outputs, UVLO Low

BGA-25

Processor Supervisor 3.08V 3.08V 8-Pin SOIC N - Bulk

Low Cost Micropower, Low Noise CMOS RRIO Quad Op Amp

RS-485/RS-422 ICs 0/3 32Mbps 3V ~ 5.5V SSOP-16_150mil RoHS

RF Detector 40MHz to 10GHz RMS Pwr Detector w/ 57dB

Supervisory Circuits Low-Cost, uP Supervisory Circuits

Charge Pump STPUP 5V 50mA 6-Pin TSOT-23 T/R

The LT6108IMS8-1 is a precision current sense amplifier with integrated comparator and 400 mV reference, operating from 2.5 V to 18 V supply, featuring 125 dB CMRR and 450 µV max offset voltage in an MSOP-8 package.

HMC288MS8ETR is a Analog Devices integrated circuit for production electronic assemblies. It uses 8 pins with Small Outline Packages packaging. From RFQ pricing with stock checks and worldwide shipping.

Analog Devices LTC3351EUFF#TRPBF is a voltage-mode switching controller IC operating from 4.5 V to 35 V (nominal 12 V), designed for supercapacitor backup and charger management, housed in a 44-pin QFN EP package with tape-and-reel delivery.

Op Amp Dual GP R-R I/O ±6.3V/12.6V Automotive 8-Pin MSOP

LDO Regulator Pos 0V to 36V 1.1A 8-Pin MSOP EP

LDO Regulator Pos 1.22V to 20V 0.3A Automotive 8-Pin MSOP T/R

LT8650SIV#PBF is a dual synchronous step-down DC/DC converter supporting input voltages from 3 V to 42 V with 5 A per channel output capability. It uses current-mode PWM control for fast transient response and excellent load regulation. Designed for industrial power supplies, automotive systems, and multi-rail point-of-load conversion.

LDO Regulator Pos 1.5V 1.1A Automotive 8-Pin MSOP EP Tube