Analog Devices

Hot Swap Voltage Controllers Hot Swap Controller w/Active Limit

SP Amp DIFF AMP Dual R-R I/O 12V Automotive 8-Pin MSOP T/R

Analog Devices LTC2851HMS8#TRPBF is a single-channel RS-422/RS-485 line transceiver in an 8-pin MSOP package, designed for automotive and industrial applications with differential Schmitt trigger inputs and wide supply range. It supports data rates up to 20 Mbps and operates over a -40°C to +125°C automotive temperature range. Available in tape-and-reel from authorized distributors worldwide with fast shipping.

Switching Voltage Regulators 36Vin, 5A CVCC Step Down uModule Regulator

The LT3650EMSE-4.1#PBF is a high-voltage monolithic Li-Ion battery charger from Analog Devices, delivering up to 2 A charge current with a fixed 4.1 V float voltage from input supplies up to 34 V. It integrates thermal regulation, bad-battery detection, and charge status outputs in a 12-pin MSOP package.

Gate Drivers 3kV Isolated Prec Half-Bridge Driver, 4A

LDO Voltage Regulators 800mA ULN 1.5to5.1Vo Adj LDO

The LTC2641CMS8-16#PBF is a 16-bit unipolar single-channel DAC from Analog Devices with serial SPI interface, operating from a 2.5 V supply. It delivers precision analog output for industrial control and instrumentation applications. Available in a compact MSOP-8 package with RoHS-compliant lead-free construction.

Dual-Channel Isolators with isoPower® Integrated DC/DC Converter, 50 mW (1/1 channel directionality)

LT1170HVCQ#PBF is a high-voltage 5A switching regulator IC from Analog Devices operating up to 60V input with 100kHz PWM control. It supports current-mode control for stable regulation across wide input ranges. Available in a ceramic package with RoHS-compliant PBF designation for industrial and automotive power supply designs.

RF MODULATOR 200MHZ-6GHZ 24UFQFN,RF Modulator IC 200MHz ~ 6GHz 24-UFQFN Exposed Pad

Digital to Analog Converters - DAC 16 channel 16 bit BIPOLAR DAC

RF Receiver 1.3V/1.8V 196-Pin CSP-BGA T/R

Dual Precision Op Amp

RF Transceiver Integrated Dual RF

The LT1943EFE#PBF is a quad-output TFT LCD power supply controller from Analog Devices using current-mode PWM switching. It accepts 4.5 V to 22 V input and generates four regulated rails for display bias, gate drive, and backlight applications. Packaged in a 28-pin TSSOP, it streamlines power supply design for portable and industrial LCD panels.

LTC6269IMS8E-10#TRPBF is a dual precision voltage-feedback op-amp from Analog Devices in an 8-pin MSOP package, featuring rail-to-rail output, ±2.625 V to ±5.25 V supply range, 50 dB minimum CMRR, and sub-femtoampere bias currents for automotive and precision analog applications.

High Speed Operational Amplifiers 3GHz Low Noise/Low Distortion Differential Amp

Op Amp Dual GP R-R I/O ±22V/44V 8-Pin MSOP

Analog Devices LTC2000ACY-16#PBF is a high-speed 16-bit single-channel current-steering DAC capable of 2.5 GSPS output update rates in a 170-pin BGA package. Delivers a differential analog output of plus and minus 1 V with serial and parallel input interfaces. Available from stock with worldwide shipping.

The LT8711IFE#PBF is an automotive-grade single-output step-down/step-up DC/DC switching controller with current-mode PWM, 4.5 V to 42 V input range, 825 kHz switching frequency, housed in a 20-pin TSSOP EP package for wide-input automotive and industrial power conversion.

LT1268CQ#PBF is a high-current 7.5 A current-mode switching voltage regulator from Analog Devices with 150 kHz switching frequency and input voltage range 3 V to 30 V. It delivers high efficiency buck, boost, or inverting conversion in a 5-lead power package. Ideal for distributed power supplies, telecom boards, and industrial DC-DC converters. From $12.50 in stock with worldwide shipping.

7-Channel Single ADC Delta-Sigma 19.2ksps 24-bit Serial 32-Pin LFCSP EP Tray

The LTM2881HY-3 is a complete isolated RS-485/RS-422 µModule transceiver from Analog Devices, integrating an isolated data transceiver and DC/DC power converter in a 32-ball BGA package. It supports up to 20 Mbps data rates with 2500 V RMS isolation, making it ideal for industrial fieldbus, process control, and noise-sensitive communication networks.

LTC6269IMS8E#PBF is a dual precision op-amp with rail-to-rail output, ±2.625V/5.25V supply range, 500 MHz gain-bandwidth product, and ultra-low 0.002 µA bias current in an 8-pin MSOP package for automotive applications.

Analog Devices LTM2881HY-5 is an automotive-grade isolated RS-422/RS-485 single transceiver with differential Schmitt trigger input, integrated isolation, and 32-pin BGA package. Designed for robust bidirectional half-duplex serial communication in automotive and industrial environments with high noise immunity.

The LT3020IMS8-1.8#PBF is a low-dropout linear regulator delivering a fixed 1.8 V output at up to 100 mA, with an input range of 2.1 V to 10 V and a maximum dropout of 285 mV. Packaged in an 8-pin MSOP, it is AEC-Q100 qualified for automotive use and rated to 125 °C junction temperature.

The LTC4291IUF-1#PBF is a 4-port IEEE 802.3at/af Power over Ethernet (PoE/PoE+) PSE controller in a compact 24-pin QFN package. It manages up to 4 PoE ports simultaneously, providing detection, classification, and power management for powered devices.

RF Receiver 3V/5V 48-Pin LQFP T/R

LDO Voltage Regulators 300mA CMOS Low-Dropout Regular

RF IC Fractional- N Divider 0Hz ~ 7GHz Frequency Sweeper 32-QFN (5x5)

LDO Voltage Regulators Ultra Low Noise, High PSRR #Negative LDO

The Analog Devices LT5400BMPMS8E-1#PBF is a quad matched resistor network in an 8-pin MSOP-EP package, offering tight resistor ratio matching suitable for precision analog signal conditioning in automotive environments. Available worldwide with fast shipping.

LTC1261LCMS8-4.5#PBF is a switched-capacitor voltage inverter IC from Analog Devices, generating a fixed -4.5V output from a 5V input rail. It operates with an input voltage range of 4.75V to 5.25V and comes in a compact MSOP-8 package, ideal for space-constrained designs.

The LT1999MPMS8-10#TRPBF is a high-voltage bidirectional current sense amplifier from Analog Devices with a fixed gain of 10, 120 dB CMRR, and a wide common-mode input range, packaged in an 8-pin MSOP for precision power monitoring in automotive and industrial applications.

Analog Devices LTC6655BHMS8-5#TRPBF is an ultra-low noise, 5 V precision voltage reference in an 8-pin MSOP package, with output accuracy of 4.9987 V to 5.0012 V. It delivers sub-2 µVpp noise from 0.1 Hz to 10 Hz and excellent long-term stability for high-precision ADC and DAC applications. Ideal for precision instrumentation, data acquisition systems, and calibration equipment demanding tight reference accuracy.

The LTC1992-10IMS8#TRPBF is a fully differential amplifier from Analog Devices with rail-to-rail output, ±5.5 V supply range, 60 dB CMRR, and automotive-grade qualification in an 8-pin MSOP package, suited for precision signal conditioning in harsh environments.

LT3463EDD#TRPBF is a dual micropower DC/DC converter from Analog Devices featuring integrated Schottky diodes for boost and inverting configurations. It accepts input voltages from 2.4 V to 15 V and uses constant off-time voltage-mode control. Available in a compact 10-pin DFN package for space-constrained designs.

Differential Amplifiers Low Noise SAR ADC Driver?Single-Ended to Differential Converter

LTC2162IUK#PBF is a 16-bit, 65 MSPS low-power ADC from Analog Devices operating from a 1.8 V supply with parallel output interface and a maximum linearity error of only 0.0092%. It accepts a differential analog input from -2 V to 2 V in a 48-pin QFN package for high-speed signal digitization. Available from stock with worldwide shipping.

Switching Voltage Regulators 58VIN, 6A CVCC Buck Module Reg

LT6350CDD#PBF is a low-noise differential amplifier and SAR ADC driver from Analog Devices in a small outline no-lead package, converting single-ended inputs to differential outputs with minimal noise for high-resolution 12-bit to 18-bit ADC interface applications.

The LT1814CS#PBF is a quad 100 MHz voltage-feedback operational amplifier from Analog Devices offering 3.6 mA supply current per amplifier. Featuring 85 dB common-mode rejection ratio and 5 µA maximum bias current, it suits precision high-speed signal processing.

DAC 4-CH Resistor-String 12-bit 16-Pin TSSOP T/R

LT3958IUHE#PBF is a high input voltage current-mode switching regulator IC from Analog Devices supporting boost, flyback, SEPIC, and inverting topologies. It operates from 5 V to 80 V input with a programmable switching frequency of 100 kHz to 1 MHz. Ideal for industrial power supplies, automotive systems, and wide-input-range DC-DC conversion applications.

RF Amplifier lo Noise amp SMT, 14 - 27 GHz

LTC2851IMS8#TRPBF is a 3.3 V full-duplex RS-485/RS-422 transceiver by Analog Devices supporting data rates up to 20 Mbps with differential Schmitt-trigger receiver inputs for high noise immunity. Housed in an 8-pin MSOP package, it is rated for industrial -40°C to +85°C operation and drives bus networks with up to 32 unit loads. Available from stock with worldwide shipping.

Digital to Analog Converters - DAC 16-bit 12GSPS RF DAC w/3GSPS Channel

Linear Battery Charger Li-Ion/Li-Pol 800mA 4.2V 5-Pin TSOT-23 T/R

ANALOG DEVICES - HMC618ALP3ETR - RF AMP, 19DB, 1.2-2.2GHZ, 5V, QFN-16