Analog Devices

The LTC3118HFE#PBF is an 18 V, 2 A buck-boost DC/DC converter from Analog Devices with low-loss dual input PowerPath and current-mode PWM control. It operates from 2.2 V to 18 V input and regulates output from 2 V to 18 V with seamless buck-boost transitions. Available in stock worldwide with competitive pricing.

The LTC2918CDDB-A1#TRMPBF is a 1-channel automotive-grade voltage supervisor and reset IC from Analog Devices in a compact 10-pin DFN package with exposed pad. It features an adjustable threshold, active-low open-drain reset output, and manual reset input for reliable processor supervision. Available from stock worldwide with competitive pricing.

The LTC6812ILWE-1#3ZZPBF is an Analog Devices multicell battery monitor IC supporting up to 9 cells with adjustable voltage thresholds, housed in a 64-pin LQFP package for accurate cell voltage measurement in EV and energy storage battery management systems.

Analog Devices LT8364IDE#PBF is a low quiescent current boost, SEPIC, and inverting DC-DC converter with a 4 A / 60 V internal switch, operating from 2.8 V to 60 V input. Current-mode control with pulse-skip delivers high efficiency across light and heavy loads in industrial and automotive power designs.

SMT-8

The Analog Devices LTC2067IMS8#PBF is a dual zero-drift operational amplifier with ultra-low 10 µA total supply current, 35 fA maximum input bias current, and 123 dB typical CMRR, packaged in an 8-pin MSOP. Designed for precision sensor signal conditioning in battery-powered and high-accuracy measurement applications.

Switching Voltage Regulators 4 Switch Buck-Boost Controller

Multiplexer Switch ICs 4:1 2Ch Precision

MAXIM INTEGRATED PRODUCTS - MAX309CUE+ - 4:1 Analog Multiplexer IC, Dual, 175 ohm, 5V to 30V, TSSOP-16

The LTC2451CDDB#TRMPBF is a 16-bit delta-sigma ADC from Analog Devices with an I2C interface operating up to 5.5 V. It provides single-ended conversion at 60 Hz output rate with low linearity error for precision measurement. Ideal for sensor digitization, industrial instrumentation, and portable medical devices requiring compact 8-pin DDB packaging.

Analog Devices LTC7151SEV#PBF is a 20 V input, 14 A synchronous monolithic buck converter with current-mode control in a compact 28-lead QFN package. Delivers high-efficiency DC-DC step-down conversion from 3.1 V to 20 V input. Available in stock worldwide.

LT8570EMS8E-1#TRPBF is a current-mode PWM DC-DC converter from Analog Devices supporting 2.55 V to 40 V input and 65 V output for boost, SEPIC, and inverting topologies. It delivers up to 0.25 A output current in a compact 8-pin MSOP-EP package. RoHS-compliant, available on tape and reel with worldwide shipping.

MAX336CPI+ Maxim, Multiplexer Single 16:1, 12 V, 15 V, 18 V, 24 V, 28 V, 5 V, 9 V, 28-Pin PDIP

D2PAK-5

Op Amp Dual Volt Fdbk R-R O/P ±6.3V/12.6V Automotive 8-Pin MSOP T/R

LDO Regulator Neg -1.22V to -20V 0.2A Automotive 8-Pin DFN EP T/R

IC TXRX RS-485 8-DIP

RS-485 Interface IC 15kV ESD-Protected, 60V Fault-Protected, 10Mbps, Fail-Safe RS-485/J1708 Transceivers

LDO Voltage Regulators 200mA L/N Negative LDO in Thin SOT

LDO Voltage Regulators Fast Transient 3A LDO

LDO Voltage Regulators Fast Transient 3A LDO

MAXIM INTEGRATED PRODUCTS - MAX1557ETB+T - DC-DC Switching Sync-Buck (Step Down)Regulator, Adj, 2.6V-5.5Vin, 1V-1.5V/600mA out, 1 MHz, TDFN-10

Analog Devices LTC4060EDHC#PBF is a standalone 2 A NiMH/NiCd battery charger IC in 16-pin DFN package with adjustable charge termination and automatic cell-count detection. Designed for portable electronics and rechargeable tool battery management systems.

The LTC4410ES6#TRMPBF is an Analog Devices USB power manager and battery management IC in a SOT-23-6 package that controls USB power delivery and Li-Ion charging with adjustable threshold for single-channel portable systems. It simplifies USB-powered designs by managing power path switching and current limiting between a USB input and a battery.

RS-422/RS-485 Interface IC +/-15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-Limited RS-485/RS-422Transceivers in a SOT

Analog Devices LT8606BEDC#TRMPBF is a 42 V input, 350 mA synchronous step-down switching regulator with ultra-low 2.5 µA quiescent current for battery-powered designs. It uses current-mode PWM control in a compact SOT-23-style no-lead package. Available from authorized distributors with worldwide shipping.

Power Management Specialised - PMIC IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

Power Switch ICs - POE / LAN PoE 13W Quad PSE Controller

RF Receiver 315MHz/433MHz ASK Superheterodyne Rec

Triple 128-Position Nonvolatile Digital Potentiometer

RF Receiver 315MHz/433MHz ASK Superheterodyne Receiver with AGC Lock

The LTC6406IMS8E#TRPBF is an 800 MHz rail-to-rail input differential amplifier and ADC driver from Analog Devices with low noise and 65 dB typical CMRR in an 8-pin MSOP package. It operates on a single supply down to 2.7 V and drives high-speed ADCs with excellent common-mode rejection. Available from stock worldwide for communications, instrumentation, and data acquisition designs.

The LTC6406CMS8E#PBF is an 800 MHz rail-to-rail input differential amplifier and driver from Analog Devices with low noise and voltage-feedback architecture. It delivers 50 dB minimum CMRR and 3.5 mV maximum offset voltage in a compact MSOP-8 package. Available in stock worldwide for high-speed signal chain applications.

Analog Devices LTC6406IMS8E#PBF is an 800 MHz low-noise rail-to-rail input differential amplifier and ADC driver with 65 dB typical CMRR and 3.5 mV maximum input offset voltage in an MSOP-8 package. Optimized for driving high-speed ADC inputs and differential signal processing in communication and instrumentation systems.

SOT-223, 4 PIN

Precision Amplifiers 200V Precision Amplifier

LTC6655BHMS8-2.048#TRPBF is an ultra-low-noise 2.048 V precision voltage reference from Analog Devices with an output accuracy band of 2.0474 V to 2.0485 V and a noise density below 2 µV peak-to-peak. It delivers a stable reference for 16-bit and 18-bit ADC and DAC circuits in an MSOP-8 package. Available from stock worldwide with fast shipping.

Analog Devices LTC6655BHMS8-4.096#TRPBF is a 4.096V ultra-low-noise precision voltage reference in an 8-pin MSOP package with output accuracy from 4.0949V to 4.097V. It targets high-resolution ADC/DAC reference designs demanding sub-1 ppm/°C drift.

LTC6655BHMS8-2.048 is a precision 2.048 V voltage reference IC from Analog Devices with ultra-low noise and high accuracy in an MSOP-8 package. It delivers 0.05% initial accuracy and 2 ppm/°C temperature coefficient for demanding ADC and DAC reference applications. Available from stock worldwide with fast global shipping.

Analog Devices LTC2512IDKD-24#PBF is a 24-bit successive-approximation ADC with configurable digital filter, accepting analog inputs from -2.5 V to 5.1 V with a maximum conversion time of 0.46 µs. Packaged in a 24-lead small-outline no-lead (SON) package. Available in stock worldwide with fast shipping.

Analog Devices LTC3388EMSE-3#PBF is a high-efficiency hysteretic current-mode step-down switching regulator accepting 2.7 V to 20 V input and delivering a fixed 3 V output at up to 50 mA, with an ultralow quiescent current below 1 µA ideal for battery-powered IoT and wearable applications.

Voltage References Ultra Low Noise, 3V Precision Voltage Reference

The LTC6655BHMS8-2.5#PBF is an ultra-low noise 2.5 V precision voltage reference from Analog Devices, packaged in an 8-pin MSOP with output accuracy between 2.4993 V and 2.5006 V. It delivers exceptional DC precision and low noise for high-resolution ADC references, precision DAC supplies, and metrology-grade instrumentation designs.

Analog Comparators Ultra-Low-Power, Open-Drain, Single/Dual-Supply Comparators

Analog Devices MAX5491WC30000+T is a precision-matched resistor-divider network with 300 kΩ total resistance, 0.1% ratio accuracy, and 5 ppm/°C tracking TCR in a compact SOT-23 package. Available from stock with worldwide shipping.

MAXIM INTEGRATED PRODUCTS - MAX982ESA+ - Analogue Comparator, Low Voltage, Micropower, 2 Comparators, 12 µs, 2.5V to 11V, ± 1.25V to ± 5.5V

LTC3586EUFE-1#PBF is a high-efficiency USB power manager with dual buck converters, one boost converter, and a buck/boost converter from Analog Devices, housed in a compact 38-pin QFN package. It integrates 4 DC/DC channels plus battery charger management for portable USB-powered devices. Available in stock worldwide with competitive pricing.

Dual, FAST, Accurate Step-Down DC/DC Controller with Differential Output SENSING

Switching Voltage Regulators ADJ Outputs, UVLO Low

BGA-25