Integrated Circuit

Battery Management High Efficiency Bidirectional Multicell Battery Balancer

Analog Devices LT3010MPMS8E-5 is a 5 V fixed-output low-dropout linear regulator rated for 80 V input and 50 mA output, housed in a compact 8-pin MSOP-EP package for space-constrained designs.

Analog Devices LT1997IMS-2#PBF is a precision operational amplifier with 118 dB typical CMRR. It offers ultra-low bias current of 5 nA at 25°C in a compact MSOP package. Available from stock with worldwide shipping.

LDO Regulator Pos 1.275V to 60V 0.05A Automotive 8-Pin MSOP EP

Analog Devices LTC3621IMS8E#PBF is a synchronous step-down DC-DC converter with 2.7V to 17V input range, 0.6V to 17V adjustable output, and 1A output current, qualified for automotive use. It uses current-mode control with pulse skip mode for high efficiency across load conditions. Available in an 8-pin MSOP-EP package with worldwide shipping.

LDO Regulator Pos 1.275V to 60V 0.05A Automotive 8-Pin MSOP EP Tube

Analog Devices HMC435AMS8G is a DC to 4 GHz SPDT high-isolation RF switch IC with 1.8 dB maximum insertion loss, 30 dB minimum port isolation, 30 dBm 1 dB compression point, and 50 Ω impedance in an SMT package for wireless and test equipment applications.

The Analog Devices LTC3621HMS8E-2#PBF is an automotive-grade synchronous step-down DC-DC converter with a 2.7 V to 17 V input range and up to 1 A output current in an 8-pin MSOP with exposed pad. It supports pulse-skip mode for high light-load efficiency and an adjustable output from 0.6 V to 17 V, making it ideal for automotive and industrial power rails. Available from stock worldwide with lead-free RoHS-compliant packaging.

Analog Devices LT1997HDF-3#PBF is a precision rail-to-rail operational amplifier in a compact 14-pin DFN (4x4 mm) package, featuring 200 µV maximum input offset voltage and 90 dB minimum CMRR. It delivers high accuracy for signal conditioning in space-constrained designs. Available from authorized distributors with worldwide shipping.

Analog Devices LTC3621HMS8E-5#PBF is a step-down DC-DC switching regulator with 2.7 V to 17 V input range, fixed 5 V output at 1 A, in an automotive-grade 8-pin MSOP EP package with current-mode control and pulse-skip mode for efficient low-power operation.

Accelerometer Triple ±16g 3V 50mV/g to 64mV/g Automotive 12-Pin LFCSP EP T/R

The LT1996CMS#PBF is a precision gain-selectable differential amplifier from Analog Devices featuring 100 dB typical CMRR and 120 dB nominal common-mode rejection for accurate signal acquisition. It operates as a voltage-feedback operational amplifier with ultra-low 5 nA bias current in a compact MSOP package. Available worldwide for precision instrumentation, data acquisition, and industrial sensing applications.

Analog to Digital Converters - ADC 20-Bit, 1 MSPS, Diff PulSAR ADC

Analog Devices MAX3087EEPA+ is an RS-485/RS-422 transceiver IC in an 8-pin PDIP package, rated for 10 Mbps data rate with 15 kV ESD protection and fail-safe inputs, enabling robust differential communication in industrial and building automation networks.

SP Amp DIFF AMP Single R-R O/P ±6.3V/12.6V 8-Pin MSOP

Analog Devices LT1997HMS-1#PBF is a precision high-voltage difference amplifier with 98dB typical CMRR and 0.005µA bias current at 25°C in an MSOP package. Ideal for current sensing, bridge amplification, and high-voltage differential signal acquisition. Available in stock with worldwide shipping.

The LT1996CDD#PBF is a precision difference amplifier IC by Analog Devices featuring 120 dB typical common-mode rejection ratio (CMRR) and ultra-low 5 nA bias current at 25°C. It is a voltage-feedback operational amplifier designed for high-accuracy differential signal measurement and sensor interface applications. Available in a compact DFN package for space-constrained PCB designs.

32-bit Microcontrollers - MCU FS90AS048AF - Communication Controller

RS-422/RS-485 Interface IC Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers

Transimpedance Amplifiers 47MHz to 870MHz Analog CATV Transimpedance Amplifier

The MAX32666GWP+ is a dual-core ARM Cortex-M4F secure microcontroller from Analog Devices running up to 96 MHz with hardware security features and ADC integration in a compact WLCSP-109 package, without an integrated BLE radio. Key specs include two independent 32-bit Cortex-M4F cores with DSP/FPU, hardware cryptographic engine, DMA controller, boundary scan JTAG, and a wide range of analog and digital peripherals for secure embedded computing. Ideal for wearables, medical devices, IoT sensor hubs, and industrial edge AI applications requiring dual-core processing with hardware-rooted security.

Battery Monitoring 5.6V Automotive 48-Pin SSOP Tube

ADI

MAXIM INTEGRATED PRODUCTS - MAX3646ETG+ - Laser Diode Driver, SFP/SFF Optical Modules, 2.97V to 3.63V, TQFN-24

Switching Voltage Regulators [Tin-Lead SnPb BGA] Ultralow EMI 36Vin, 3A Step Down uModule Regulator

The LTM8033EY#PBF from Analog Devices is a complete µModule step-down DC/DC switching regulator accepting 3.6 V to 36 V input and delivering 0.8 V to 24 V output with current-mode PWM control. Housed in a compact 11.25 x 15 mm, 4.92 mm height BGA-76 package, it integrates the inductor, controller, and MOSFETs for minimal external component designs in industrial and communications power supplies.

LTM8033EV#PBF is an automotive-grade DC-DC step-down µModule regulator accepting 3.6V to 36V input and delivering 0.8V to 24V output at up to 3A. It uses current-mode PWM control and integrates the inductor, MOSFETs, and controller in a compact 76-pin LGA package. Fully AEC-Q100 qualified for demanding automotive and industrial power applications.

Analog Devices LTC2851HMS8 is an automotive-grade RS-422/RS-485 single transceiver operating at data rates up to 20 Mbps with ±15 kV ESD protection in an 8-pin MSOP package. It supports half-duplex RS-485 and full-duplex RS-422 communication over long cable runs. Available in stock worldwide with fast shipping for automotive and industrial network designs.

SMBus Four-Channel Very Wide Dynamic Range Power Accumulator

Analog Devices LTC2851MPMS8 is a single-channel RS-422/RS-485 automotive-grade transceiver with a minimum differential output swing of 1.5 V, housed in an 8-pin MSOP package. It integrates one driver and one receiver for robust half-duplex or full-duplex industrial communication.

开关稳压器 20V, 12A Step-Down DC/DC ?M Reg

Analog Devices MAX32630IWG+ is an ultra-low-power 32-bit Arm Cortex-M4F MCU with 2MB Flash, 512KB SRAM, running at up to 96 MHz. Integrates advanced security, multiple interfaces, and a 10-channel ADC for IoT and wearable applications.

Analog Devices LTM4613EY#PBF is an EN55022B-compliant DC/DC µModule regulator delivering 8A from a 36V input with 15V fixed or 3.3V–15V adjustable output. From $25.00 in stock, worldwide shipping.

The Analog Devices MAX77752BETL+ is a multi-channel integrated PMIC in a compact QFN package, designed specifically for SSD power management with multiple regulated voltage rails, sequencing control, and power monitoring. Available with worldwide shipping for storage and embedded systems applications.

Current & Power Monitors & Regulators 200mA Two Terminal Programmable Current Source

LDO Regulator Pos 1.2V to 19.5V 1.1A Automotive 8-Pin MSOP EP T/R

Analog Devices MAX77752BETL+T is a multichannel integrated power management IC in a compact QFN package, delivering multiple regulated voltage rails with integrated LDOs, buck converters, and power sequencing for SoC and mobile application platforms. It reduces BOM count and PCB area in smart devices by consolidating 5 or more power rails into a single PMIC.

MCU 8-bit/16-bit CISC ROMLess 5V 100-Pin TQFP

Analog Devices MAX7042ATJ+ is a high-sensitivity IF receiver IC covering 300 MHz to 450 MHz, designed for AM/ASK and FSK demodulation in short-range wireless applications. Integrated low-noise amplifier, mixer, and data slicer simplify receiver design in a compact 28-pin TQFN package.

BUCK, DUAL, CNTRL, 4.5-38V, 2MHZ, 38QFN

The LTM4677EY#PBF is a dual 18 A or single 36 A DC/DC µModule regulator from Analog Devices with integrated digital power system management. It accepts a 4.5 V to 16 V input, provides adjustable 0.5 V to 1.8 V output via current-mode PWM control, and is housed in a compact BGA package for high-density power designs.

Micropower, Single-Supply, Rail-to-Rail Precision Differential Amplifiers

Analog Devices LTC7821IUH#PBF is a hybrid step-down synchronous controller supporting 10 V to 72 V input in a 32-lead QFN package. It combines voltage-mode PWM control with hybrid switching to achieve high efficiency at wide input ranges. Targeted at 48 V telecom, server, and industrial DC-DC power conversion applications.

The LTC3355EUF#PBF is a synchronous step-down DC/DC switching regulator by Analog Devices with 3V to 20V input range, 1A output current, and adjustable 2.7V to 5V output in a compact 20-pin QFN-EP package. Key specs: 1A output, 3V to 20V input, 2.7V to 5V output range, current-mode PWM control. Available in stock with worldwide shipping.

Analog Devices LTC6406CMS8E#TRPBF is an 800 MHz low-noise rail-to-rail input differential amplifier and ADC driver in an MSOP-8 package. It offers 65 dB CMRR, 24 µA max bias current, and 3500 µV input offset voltage for precision high-speed signal conditioning. Available in tape-and-reel from authorized distributors with worldwide shipping.

LTC5582HDD#PBF is an Analog Devices RMS RF power detector covering 40 MHz to 10 GHz with a 50-ohm input impedance and up to 18 dBm CW input power handling, housed in a 10-pin DFN package. It provides a DC output voltage proportional to RF input power for accurate power measurement across a 40 dB dynamic range. Available in a compact SMT package with worldwide distribution.

Micropower, Single-Supply, Rail-to-Rail Precision Differential Amplifiers

Analog Devices LTC3586EUFE-2#PBF is a high-efficiency USB power manager combining dual buck, one boost, and one buck-boost DC-DC converter in a 38-pin QFN package. It integrates 6 channels with adjustable threshold for Li-ion battery management from a USB input. Available from stock with worldwide shipping.

RS-422/RS-485 Interface IC Half duplex, dual voltage (3V to 5.5V), high ESD HBM (+/-35kV), 500kbps, automotive temp range (-40C to

Active Filter Single Low Pass 8th Order 8kHz 8-Pin SOIC N T/R