LT1996CDD#PBF Analog Devices Integrated Circuit (Small Outline No-lead) In Stock
The LT1996CDD#PBF is a precision difference amplifier IC by Analog Devices featuring 120 dB typical common-mode rejection ratio (CMRR) and ultra-low 5 nA bias current at 25°C. It is a voltage-feedback operational amplifier designed for high-accuracy differential signal measurement and sensor interface applications. Available in a compact DFN package for space-constrained PCB designs.
- Manufacturer
- Analog Devices
- Package
- Small Outline No-lead
- Pin Count
- 10
- Lifecycle
- ACTIVE
- Datasheet
- LT1996CDD#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $2.4510(MOQ 1)
- Temp Range
- ?°C to 70.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 120 dB typical CMRR (85 dB minimum) enabling precise rejection of common-mode noise in differential measurement systems
- Ultra-low 5 nA bias current at 25°C for accurate high-impedance sensor signal conditioning without input loading errors
- Voltage-feedback architecture providing stable, predictable frequency response for precision instrumentation designs
- Compact DFN package (Small Outline No-lead) minimizing PCB footprint in space-constrained measurement circuits
- Precision difference amplifier topology simplifying gain-setting resistor networks for differential-to-single-ended conversion
Applications
The LT1996CDD#PBF is used in precision measurement systems requiring accurate differential-to-single-ended signal conversion, such as industrial strain gauge amplifiers, bridge sensor interfaces, battery stack voltage monitors, and 4-20 mA current loop receivers. Its 120 dB CMRR ensures that common-mode interference on long sensor cables does not corrupt the differential measurement, making it ideal for noisy industrial environments with ground potential differences up to several volts. The ultra-low 5 nA bias current also makes it suitable for high-impedance electrochemical sensor interfaces and precision DAQ front-end circuits.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1699 |
| YTEOL | 10 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.0075 µA |
| Bias Current-Max (IIB) @25C | 0.000005 µA |
| Common-mode Reject Ratio-Min | 85dB |
| Common-mode Reject Ratio-Nom | 120dB |
| Frequency Compensation | NO |
| Input Offset Voltage-Max | 250 µV |
| JESD-30 Code | S-PDSO-N10 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | YES |
| Micropower | YES |
| Neg Supply Voltage Limit-Max | -20 V |
| Neg Supply Voltage-Nom (Vsup) | -15 V |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOLCC10,.12,20 |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | YES |
| Qualification Status | Not Qualified |
| Slew Rate-Min | 0.06V/us |
| Slew Rate-Nom | 0.12V/us |
| Supply Current-Max | 0.21mA |
| Supply Voltage Limit-Max | 20V |
| Supply Voltage-Nom (Vsup) | 15V |
| Surface Mount | YES |
| Technology | BIPOLAR |
| Temperature Grade | COMMERCIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Unity Gain BW-Nom | 560 |
| Wideband | NO |
| Package | Small Outline No-lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What CMRR does the LT1996CDD#PBF achieve and why does this matter for industrial sensor measurements?
The LT1996CDD#PBF achieves a typical common-mode rejection ratio of 120 dB with a guaranteed minimum of 85 dB, which means common-mode interference at the differential input is attenuated by a factor of 1,000,000 or more before reaching the output. In industrial sensor applications with long cable runs, ground loops or coupling from 50/60 Hz power lines can introduce common-mode voltages of 1 V or more at the amplifier inputs, which without high CMRR would corrupt millivolt-level differential measurements. The 120 dB CMRR of the LT1996 allows accurate measurement even with several volts of common-mode interference present across the sensor cable.
How does the 5 nA input bias current of the LT1996CDD#PBF reduce measurement errors in high-impedance sensor interfaces?
The LT1996CDD#PBF has a maximum input bias current of 5 nA at 25°C, which is one of the lowest available for a precision difference amplifier. When the input bias current flows through the source impedance (such as a 100 kohm bridge sensor or electrochemical electrode), it creates an offset voltage error equal to Ibias times the source resistance. At 5 nA through 100 kohm, this error is only 0.5 mV, which is negligible in most precision 12-bit or 16-bit ADC systems. Higher bias current amplifiers can produce offset errors of tens of millivolts with high-impedance sources, severely limiting measurement accuracy.
For a Wheatstone bridge strain gauge circuit, how does the LT1996CDD#PBF simplify the signal conditioning design?
A Wheatstone bridge strain gauge produces a small differential output voltage (typically 1 mV to 10 mV full-scale at 5 V excitation) riding on a large common-mode voltage equal to half the bridge supply. The LT1996CDD#PBF directly processes this differential signal and rejects the common-mode voltage with its 120 dB CMRR, eliminating the need for a separate instrumentation amplifier or complex differential input stage. The internal precision resistor network sets a fixed gain with tight ratio matching, reducing the number of external components and the gain error compared to a discrete op-amp difference amplifier built with 1% resistors.
How does the LT1996CDD#PBF compare to a three-op-amp instrumentation amplifier for a battery stack voltage measurement application?
The LT1996CDD#PBF is a single-package solution for differential-to-single-ended conversion with a fixed gain and 120 dB CMRR, making it simpler and lower-cost than a three-op-amp in-amp topology that requires 3 op-amps and up to 7 external resistors. For battery stack cell voltage monitoring where the common-mode voltage can be tens of volts above ground but the differential cell voltage is only 1 V to 4.2 V, the LT1996 provides sufficient CMRR in a smaller BOM. Three-op-amp instrumentation amplifiers offer programmable gain via a single external resistor and can be advantageous when variable gain is needed, but the fixed-gain LT1996 is preferred in cost-sensitive and space-constrained 12-bit to 16-bit battery management systems.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $5.4225 | $5.42 |
| 10+ | $4.4740 | $44.74 |
| 19+ | $3.2700 | $62.13 |
| 50+ | $2.6790 | $133.95 |
| 150+ | $2.5650 | $384.75 |
| 250+ | $2.4510 | $612.75 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”