Integrated Circuit

Current Sense Amplifiers Current Sense Amplifier High Voltage, High-Side Current Sense Amplifier in SOT-23

The LTC6101HVCCS5#TRPBF is an Analog Devices high-voltage current sense amplifier in a 5-pin SOT-23 package that accurately measures current over a wide common-mode voltage range. Designed for high-side current monitoring, it delivers a proportional output voltage with minimal offset error. Lead-free tape-and-reel packaging supports automated high-volume PCB assembly.

Analog Devices MAX17542GATB+ is a synchronous step-down DC/DC converter with a 4.5 V to 42 V input range, 600 kHz fixed switching frequency, and current-mode PWM control in a compact 10-pin TDFN package. Output voltage is adjustable from 0.9 V to 38.64 V. Available from authorized distributors with worldwide shipping.

VCO Oscillators VCO, GaAs, RF/2, 12.48-13.72GHz

MAXIM INTEGRATED PRODUCTS - MAX3643ETG+ - Laser Diode Driver, SFP/SFF Optical Modules, 3V to 3.6V, TQFN-24

Analog Devices LT6656AIS6-2.5#TRMPBF is an automotive-grade precision 2.5 V voltage reference with ±0.05% initial accuracy and 5 mA output current in a 6-pin TSOT-23 package. Delivers ultra-low temperature coefficient of 10 ppm/°C with output stable from -40°C to +125°C. Available in tape-and-reel Pb-free packaging for automated SMT assembly worldwide.

Driver 3A 2-OUT High and Low Side Non-Inv Automotive 8-Pin MSOP EP T/R

Analog to Digital Converters - ADC 24-Bit, 6-Channel, 64ksps, Delta-Sigma ADC with PAG and I2C and SPI Interface

Analog Devices LTC4444EMS8E-5#TRPBF is a dual-output high-side and low-side MOSFET gate driver delivering 1.75 A peak current, housed in an 8-pin MSOP EP package. It features Schmitt trigger inputs, totem-pole outputs, and AEC-Q100 automotive qualification for harsh environments. Available on tape and reel for automated assembly with worldwide distribution.

The LTC4444HMS8E is a high-side and low-side MOSFET gate driver with 3 A output drive capability, designed for half-bridge configurations in automotive applications. It features Schmitt trigger inputs and accepts a wide supply range. Stocked globally with worldwide shipping available.

Analog Devices LTC6102CMS8-1#TRPBF is a zero-drift current sense amplifier with 50 µV max input offset voltage and 0.02 µA bias current, featuring a shutdown pin for power management. It provides precision high-side current sensing in an 8-pin MSOP package with wide supply voltage range. Suitable for battery monitoring, power metering, and servo drive current feedback applications.

IC TRANSCEIVER FULL 2/2 20SSOP

LTC4000EUFD-1#PBF is a high-voltage automotive-grade linear battery charger IC from Analog Devices, housed in a compact 28-pin QFN package for thermally efficient designs. It supports versatile battery chemistries and is available in stock with worldwide shipping.

The LTC4444EMS8E#TRPBF is an automotive-grade dual-output high-side and low-side MOSFET gate driver from Analog Devices, sourcing and sinking up to 3 A peak with Schmitt trigger inputs and non-inverting logic. It drives half-bridge configurations in an 8-pin MSOP-EP package. Available from stock worldwide with fast shipping.

LDO Voltage Regulators 3.3V L/Dropout HS 3A Linear Reg

Driver 3A 2-OUT High and Low Side Non-Inv Automotive 8-Pin MSOP EP Tube

Analog Devices LTC4000EGN#PBF is a high voltage, high current battery charger controller IC in a 28-pin SSOP package, supporting wide input voltage range and programmable charge parameters. Ideal for industrial and telecom power systems. Available in stock with worldwide shipping.

The LTC6952IUKG#PBF is an ultralow-jitter multi-output clock synthesizer and distribution IC from Analog Devices supporting output clock frequencies up to 4500MHz. It is housed in a 52-lead QFN (VQFCC) package with an exposed heat slug for thermal management. Suited for demanding high-speed data converter and wireless infrastructure timing applications with worldwide shipping.

Supervisory Circuits Triple uPower Supervisor

Analog Devices LTC6810HG-1#3ZZPBF is a 6-channel Generation 4 multicell battery monitor with daisy-chain interface in a 44-pin SSOP package, delivering high-accuracy cell voltage measurement for lithium-ion battery management systems. From $1.00 in stock with worldwide shipping.

Operational Amplifiers - Op Amps High-Output-Drive, 10MHz, 10V/ us, Rail-to-Rail I/O Op Amps with Shutdown in SC70

LTC6102HMS8#PBF Analog Devices, Current Sense Amplifier Single 8-Pin MSOP

LT1636CMS8#PBF is an Analog Devices Over-The-Top rail-to-rail input and output precision operational amplifier featuring a common-mode rejection ratio of up to 103 dB and maximum input offset voltage of 850 µV. It supports input voltages above the positive supply rail, enabling high-side sensing and single-supply operation from a negative supply without additional circuitry. Available in an 8-pin MSOP package for compact signal conditioning designs.

The LTC1412IG#PBF is a 12-bit successive approximation ADC with 3 Msps throughput and ±2.5V differential input range in a 28-pin SOIC package. It features low linearity error of 0.0244% and a fast 0.283 µs conversion time for high-speed signal acquisition. Available in stock with worldwide shipping.

The LT4275BIMS#TRPBF from Analog Devices is an IEEE 802.3at PoE+ Powered Device (PD) controller IC in an 8-pin MSOP package, rated for industrial temperature operation and 260°C peak reflow compatibility. It manages the full PoE PD detection, classification, and inrush current limiting to simplify IEEE 802.3at-compliant powered device design. Available in tape-and-reel, lead-free PBF format from authorized global distributors.

Operational Amplifiers - Op Amps uP, Over-The-Top SOT-23, R2R In & Out Op

LDO Regulator Pos 5V 0.05A Automotive 8-Pin MSOP EP

LTC1754ES6-3.3#TRMPBF is a switched-capacitor charge pump voltage regulator from Analog Devices that generates a fixed 3.3 V output from a 2 V to 4.4 V input with integrated shutdown control. Operating without inductors, it simplifies PCB design for portable battery-powered applications needing a regulated voltage rail. Available in a compact 6-pin SOT-23 package for minimal board footprint.

Switching Voltage Regulators 2A, 2MHz Synchronous Step-Up DC/DC Converter in 2mm x 3mm DFN Package

The LTC6994MPS6-2#TRPBF is a silicon delay line IC from Analog Devices, operating across -55°C to 125°C in a compact 6-pin SOT-23 package. It offers programmable delay from 1 µs to 33.6 s with a single resistor. Available in tape and reel for automated assembly.

Hot Swap Controller 1-CH 80V N-Channel Positive High Voltage Automotive 8-Pin MSOP Tube

Analog Devices LTC2945IMS#TRPBF is a wide-range I2C power monitor with SDAO interface, measuring voltage, current, and power across a 1-channel 12-pin MSOP package with adjustable thresholds for comprehensive power management monitoring.

Analog Devices LTC6655BHMS8-2.5#TRPBF is an ultra-low-noise 2.5 V precision voltage reference with an output accuracy of ±0.05%, housed in an 8-pin MSOP package, ideal for high-resolution ADC and DAC reference applications requiring sub-ppm noise.

The Analog Devices ADL5386 is a broadband quadrature modulator covering 50 MHz to 2200 MHz RF output frequency with 44 dBm OIP3 and -158 dBm/Hz noise floor in a 24-lead QFN package. Available from stock worldwide with competitive pricing.

Phase Shifter Digital 3000MHz to 6000MHz 28-Pin QFN EP Cut Tape

LT8640SHV-2#PBF is a 24 pins power management ic by Analog Devices. Key specs: 24 pins, HQCCN package, Conv DC-DC 3.4V to 42V Synchronous Step Down Single-Out 0.97V to 41.58V 6A Automotive 24-Pin LQFN EP Tray. From quote-based sourcing, in stock checks support worldwide shipping.

Precision Quad SPST analog switch integrated circuits

Switching Voltage Regulators 42V, 6A Synchronous Step-Down Silent Switcher with 2.5uA Quiescent Current

LTC3621HMS8E#PBF is an automotive-grade step-down DC-DC converter from Analog Devices accepting 2.7V to 17V input, delivering 0.6V to 17V output at up to 1A with current-mode control in an 8-pin MSOP-EP package.

Analog Devices LTC3621EMS8E-23.3#PBF is a synchronous step-down DC-DC converter with 2.7V to 17V input range, 1A output current, and fixed 3.3V output. It operates in pulse-skip mode for high efficiency at light loads. Available in compact 8-pin MSOP-EP package from stock worldwide.

Analog Devices LT1964-5 is a 200 mA low-noise micropower negative LDO regulator with -5 V fixed output and only 300 mV dropout in a compact SOT-23-5 package. Features ultralow 30 µVRMS output noise for noise-sensitive analog circuits. Available from authorized distributors with worldwide shipping.

The LT1990IMS8-10 is a precision difference amplifier with rail-to-rail output, 100 MHz bandwidth, and a fixed gain of 10. It operates on ±18V or 36V single supply and delivers 60 dB minimum CMRR in a compact 8-pin MSOP package.

Analog Devices LTC6655CHMS8-3#TRPBF is an ultra-low-noise 3.0 V precision voltage reference in an MSOP-8 package, delivering ±0.05% initial accuracy and 2 ppm/°C temperature coefficient for demanding measurement and data converter applications. Available in stock worldwide with fast shipping.

AD7793 is a Analog Devices integrated circuit for PCB-level interconnects, replacement sourcing, or production BOMs. Key specs include 16 pins, Small Outline Packages. From inquiry pricing, in stock sourcing, and worldwide shipping support.

nc

LT8471IUFD#PBF is an Analog Devices dual multitopology current-mode PWM DC/DC controller with dual 2.5 A internal switches and a 2.6 V to 50 V input range, housed in a 28-pin QFN package. It supports buck, boost, SEPIC, and inverting topologies simultaneously on two independent channels with clock synchronization. Available in industrial temperature grade with worldwide distribution.

Analog Devices LTC1609IG is a 16-bit successive approximation ADC with 200 ksps throughput, ±10 V bipolar input range, and serial SPI interface in a 28-pin SOIC package. From $22.00 in stock with worldwide shipping.

20-PIN TQFN-EP

The Analog Devices LTC4162IUFD-SSTM#PBF is a 35 V input, 3.2 A maximum charge current multi-cell lithium-ion battery charger IC in a 28-lead QFN package. It provides linear battery charging with telemetry output, I2C communication for charge status monitoring, and Pb-free RoHS-compliant construction. Designed for industrial portable equipment, medical devices, and multi-cell Li-ion packs requiring programmable charging with real-time state-of-charge reporting.

LTC1992-5IMS8#PBF is a low-power, fully-differential input/output amplifier and ADC driver from Analog Devices, featuring a fixed gain of 5 V/V with 60 dB common-mode rejection ratio and 2 µA maximum bias current in an MSOP-8 package. It converts single-ended or differential signals to a balanced differential output, optimized for driving 16-bit and 24-bit SAR and delta-sigma ADCs. Suited for precision data acquisition, medical imaging, and battery-powered instrumentation requiring low noise and low power consumption.