Integrated Circuit

Clock Synthesizer / Jitter Cleaner 3.3V LVPECL/LVDS Clock Synthesizer System

LAN9374-I/ZMX

Power Switch ICs - POE / LAN

PIC16F17115-I/MD is an 8-bit PIC microcontroller with 14 KB Flash, 512 bytes RAM, 128 bytes EEPROM, a 12-bit differential ADCC, 1 integrated op-amp, and dual 16-bit PWM running at up to 32 MHz from 1.8 V. Packaged in a compact 8-pin DFN, it suits precision analog sensing and motor-control designs. Available from stock worldwide with fast shipping.

MPC2510DT is a Microchip integrated circuit for PCB-level interconnects, replacement sourcing, or production BOMs. Key specs include 24 pins, Small Outline Packages. From inquiry pricing, in stock sourcing, and worldwide shipping support.

Microchip PIC32MK0128MCA028-I/N2X is a 32-bit MIPS MCU with 128 KB ECC Flash, floating-point unit, and 28-pin SSOP package for compact motor control designs. It integrates enhanced analog peripherals and operates up to 3.6 V supply. Available worldwide with standard shipping.

The PIC32CM5164JH01064-I/5LX is a 32-bit ARM Cortex-M0+ microcontroller from Microchip, featuring 512 KB Flash, 64 KB RAM, CAN bus interface, 12-bit ADC, DAC, and DMA channels running at up to 32 MHz. It is housed in a compact 64-pin VQFN package and is rated for industrial operation up to 85°C. Ideal for industrial IoT nodes, CAN-connected sensor modules, and motor drive controllers requiring low-power ARM performance.

Clock Drivers & Distribution 3.3V LVDS Output Clock Divider/Fanout

The MCP6486UT-E/OT is a single 10 MHz voltage-feedback operational amplifier from Microchip in a 5-pin SOT-23 package. It provides 110 dB typical common-mode rejection ratio and 1600 µV maximum input offset voltage for accurate signal amplification. Well suited for active filters, sensor signal conditioning, and portable instrumentation operating across the extended temperature range.

The MCP1407 is a high-speed single MOSFET gate driver IC from Microchip capable of sourcing and sinking 6 A peak output current with 4.5 V to 18 V supply operation. It features rail-to-rail output swing and fast rise/fall times for driving large power MOSFETs efficiently. Packaged in an 8-pin DIP for easy prototyping and through-hole assembly in motor drives and power converters.

ATMEGA128-8AU is an 8-bit AVR microcontroller with 128 KB in-system programmable Flash, 4 KB EEPROM, 4 KB SRAM, 53 programmable I/O lines, and 8 MHz max clock speed in a 64-pin TQFP package. From $5.00 in stock worldwide shipping.

SiC MOSFETs MOSFET SIC 1700 V 35 mOhm TO-247

ARM Microcontrollers - MCU TQFP 100, 512 KB Flash, 64 KB SRAM, 8 KB Flash RWW, CAN,85 Temp, Green, Tray

a

8-bit Microcontrollers - MCU 28KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 1xOP-AMP, 2x16-bit dual PWM

MCP9700BT-E/TT is a linear active thermistor IC from Microchip in a 3-pin SOT-23 package, providing a 10 mV/°C analog output with ±4°C maximum accuracy for low-cost board-mount temperature sensing in consumer, industrial, and HVAC applications.

ARM Microcontrollers - MCU ; Symmetry Electronics

Microchip PIC32CM5164LE00048T is a 32-bit ARM Cortex-M23 ultra-low-power microcontroller with 512KB flash and a 32 MHz core in a 48-pin TQFP package. It integrates capacitive touch sensing, ADC, DAC, DMA, and event system peripherals for IoT edge applications. Available from stock with worldwide shipping.

The PIC32CM5164LE00048-I/Y8X is a 32-bit ARM Cortex-M23 ultra-low-power microcontroller from Microchip with 512 KB Flash and 48-pin TQFP package. It features hardware touch sensing, boundary scan, DMA, and ADC running at up to 32 MHz. Ideal for energy-sensitive embedded control and IoT applications.

MICROCHIP - MCP48FEB24-20E/ST. - DAC, QUAD, 12BIT, -40 TO 125DEG C

MCP48FVB08-20E/ST is a Microchip 8-channel, 8-bit SPI digital-to-analog converter with volatile output registers in a 20-pin TSSOP package. It delivers 8 independent analog output channels with binary-coded serial input and low linearity error of 0.1953% maximum. Designed for multi-channel analog control in industrial automation, audio, and precision instrumentation systems.

EEPROM 8K 1K X 8 32B PAGE 2.5V SER EE EXT

EEPROM 32kx8 - 2.5V

The PIC24FJ32GP205T-I/PT is a 16-bit PIC24F microcontroller from Microchip with 32 KB Flash, 8 KB RAM, and a 32 MHz maximum clock, housed in a 48-pin TQFP package. It integrates a 14-channel 12-bit ADC, multiple UART/SPI/I2C peripherals, and boundary scan for streamlined system testing. Suited for industrial sensors, consumer appliances, and low-power embedded control in tape-and-reel automated assembly.

The MCP6486RT-E/OT is a single 10 MHz rail-to-rail voltage-feedback operational amplifier with 110 dB CMRR and 1600 µV max input offset in a compact SOT-23-5 package for extended temperature applications. Available in stock with worldwide shipping.

The Supertex HV2701 is a low charge injection, 16-channel, high voltage, analog switch integrated circuit (IC) with bleed resistors. The device can be used in applications requiring high voltage switching controlled by low voltage control signals, such as medical ultrasound imaging and piezoelectric transducer drivers. The bleed resistors eliminate voltage built up on capacitive loads such as piezoelectric transducers.

Microchip MCP1501T-50E/CHY is a precision fixed 5V voltage reference with ±0.1% initial accuracy and 20 mA output current in a compact SOT-23-6 package. Features low temperature coefficient and high stability for analog signal conditioning. Suitable for ADC/DAC reference and precision measurement systems.

LDO Voltage Regulators High Voltage Dual Output LDO 5.0Vout on LDO2 with 12Vout on LDO1 SOIC 8Ld with Extended Temperature Range

The PIC16F17114-I/SN is an 8-bit PIC16 microcontroller from Microchip featuring 7 KB Flash, 512 B RAM, 128 B EEPROM, a 12-bit differential ADC, one op-amp, two 16-bit dual PWM generators, and DAC in a compact 8-pin SOIC package. It operates from as low as 1.8 V at 16 MHz, enabling very low power designs. Suited for analog signal conditioning, motor control, and IoT sensing applications requiring rich peripherals in a small package.

LDO Voltage Regulators High Voltage Dual Output LDO 5.0Vout on LDO2 with 12Vout on LDO1 VDFN 8Ld with Extended Temperature Range

Microchip DSPIC30F6014T-20E/PF is a 16-bit digital signal controller with 20 MIPS performance at 40 MHz clock, 144 KB flash memory, and an 80-pin TQFP package, targeting motor control and power conversion embedded applications. Available in stock worldwide with fast shipping.

MCU 32-Bit ATSAMC21 ARM Cortex-M0+ RISC 128KB Flash 2.7V to 5.5V 48-Pin VQFN T/R

TC74A4-3.3VCT from Microchip is a integrated circuit for industrial, communications, consumer, and embedded electronic designs. Key specs include 5 pins, SOT23 (5-Pin) package, and Board Mount Temperature Sensors. From quote pricing, in-stock sourcing support, worldwide.

The PIC32MK0128MCA048-I/Y8X is a 32-bit MIPS-based motor control MCU from Microchip with 128 KB ECC Flash, a hardware Floating Point Unit, and enhanced analog peripherals in a TQFP-48 package. It operates up to 3.6 V supply and is designed for precision motor drive and embedded control applications. Available with a 6-week lead time for development and production builds.

23LC512-I/SN is a 512 Kbit serial SRAM from Microchip in 8-pin SOIC package, organized as 64K x 8 bits and operating from 2.5 V to 5.5 V via SPI interface. Available with worldwide shipping.

PIC32CM5164JH01064-I/PT is a 32-bit ARM Cortex-M0+ microcontroller from Microchip with 512 KB flash and 32 MHz maximum clock, packaged in a 64-pin TQFP. It integrates CAN, ADC, DAC, and DMA peripherals, targeting industrial automation, building control, and automotive accessory applications up to 85°C.

93C56C-E/STG is a 2-Kbit low-voltage serial EEPROM with a 3-wire SPI-compatible interface operating at up to 3 MHz in an 8-pin TSSOP package. It supports 1,000,000 write/erase cycles and 200-year data retention for reliable non-volatile storage. Available in stock with worldwide shipping.

Switching Voltage Regulators Inverting V Doubler

CAN Interface IC Stand-alone Low Power CAN FD Controller and CAN FD TRX w/SPI Interface Grade 0

NOR Flash 2.7V to 3.6V 4Mb Multi-Purpose Flash

Microchip PIC16LF18856-I/MLVAO is an 8-bit PIC16 microcontroller in a QFN-28 package, running up to 32 MHz with 1.8 V minimum supply, integrated ADC and DAC channels, and 44 on-chip peripherals for low-power embedded applications.

Microchip MCP1502T-33E/CHY is a precision 3.3 V three-terminal voltage reference with 0.1% initial accuracy and 50 ppm/°C temperature coefficient. It sources up to 30 mA output current in a compact SOT-23-6 package, ideal for ADC and DAC reference applications in space-constrained designs.

dsPIC Automotive, AEC-Q100, dsPIC™ 33CK, Functional Safety (FuSa) Microcontroller IC 16-Bit 100MHz 64KB (64K x 8) FLASH 36-UQFN (5x5)

FLASH Memory IC 512Kb (64K x 8) Parallel 45 ns 32-PLCC (11.43x13.97)

The PIC16F17146-I/SS is an 8-bit PIC microcontroller from Microchip running up to 32 MHz with 28 KB Flash, 512 B RAM, 128 B EEPROM, a 12-bit differential ADCC, one op-amp, and dual 2x16-bit PWM in a 20-pin SSOP package. It integrates analog and control peripherals for sensor interfacing without external ICs. Ideal for smart sensors, motor control, and IoT edge nodes operating from 1.8V to 5.5V.

Microchip MCP2544WFD is a high-speed CAN FD transceiver supporting data rates up to 8 Mbps on the data phase. It operates on a 5 V supply with 8-pin SOIC package and provides robust bus fault protection for automotive and industrial CAN FD network nodes.

The HV56022-V/KNX is a dual-channel high-voltage operational amplifier from Microchip capable of operating from supply voltages up to 36V, suitable for driving high-impedance loads in industrial and precision analog signal chains. It features rail-to-rail output swing and wide bandwidth in a compact 20-pin VQFN package. Designed for industrial sensor interfaces, motor drive feedback circuits, and high-voltage data acquisition front-ends.

Security ICs / Authentication ICs Trust Flex TLS, Provisioned Proto Typing, 8-SOIC (10 bulk)

Microchip USB7052N/KDX is a USB 3.1 Gen 1 hub controller IC with integrated CC logic and I2C/SPI/UART interfaces, supporting up to 625 MBps data transfer in a compact 100-pin VQFN package.

16-bit Microcontrollers - MCU 16-Bit, 16 MIPS, 512KB ECC Flash, 32KB RAM, LCD, 48-pin