Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 14,851–14,900 of 77,666
Triple high-side MOSFET driver
OMNIFET II - fully autoprotected Power MOSFET
Automotive configurable 6-channel device
Automotive multifunction alternator voltage regulator with PI/P control loop for 12 V / 24 V on board networks
VNQ7E100AJ is a STMicroelectronics integrated circuit for industrial and embedded electronics. It provides 17 pins, Small Outline Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.
VND7E050AJ is a STMicroelectronics integrated circuit for industrial and embedded electronics. It provides 17 pins, Small Outline Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.
High voltage high-side driver
VND7E025AJ is a STMicroelectronics integrated circuit for industrial and embedded electronics. It provides 17 pins, Small Outline Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.
Automotive battery cut-off circuit and airbag system expansion IC
Double-channel high-side driver with analog current sense for automotive applications
Automotive IC for a specific application of electric parking braking LQFP64 2.5 V
High voltage ignition coil driver power integrated circuit
Octal squib driver ASIC for safety application
Automotive advanced airbag for mid/high end applications and cut-off battery IC
Boost Regulator Positive Output Step-Up SPI DC-DC Controller IC 32-QFN (5x5)
Low power voltage regulator
Automotive Extension Airbag IC
Octal squib driver ASIC for safety application
STMicroelectronics L99LD21Q6 is an automotive-grade high-power LED driver IC in a QFN-40 package. It supports serial data input for 8-channel LED control with AEC-Q100 qualification. Available from authorized distributors with worldwide shipping for automotive lighting designs.
Dual automotive linear voltage regulator with configurable output voltage (2 x 250 mA current capability)
The L99LD02Q505 is a dual-phase boost DC/DC controller from STMicroelectronics supporting PWM and PFM control modes across a 5.5 V to 28 V input range in a QFN-32 package. It provides current-mode and voltage-mode control for high-efficiency power conversion in automotive applications. Available from stock worldwide with competitive pricing.
Multi-output driver for automotive applications
The L99LD20Q6 is an 8-channel constant-current high-power LED driver IC from STMicroelectronics designed for automotive lighting applications. It features a serial SPI interface in a 40-pin QFN package, available in stock with worldwide shipping.
STMicroelectronics L5300RPT is an automotive-grade 5 V fixed low-dropout voltage regulator with 300 mA output current, 500 mV typical dropout voltage, and a wide 6 V to 28 V input range. Ultra-low 55 µA quiescent current makes it ideal for always-on automotive ECU supply rails. Available in stock worldwide with competitive pricing.
Multi-output driver for automotive applications
Automotive 5V Low Dropout Voltage Regulator
Automotive linear voltage regulator with configurable output voltage having 500 mA current capability
Precision, 6 MHz, RR IO, 36 V BiCMOS operational amplifier
L9777B is a fixed low-dropout voltage regulator from STMicroelectronics supporting input voltages from 6.6 V to 31 V with a 0.1 V dropout voltage and line/load regulation of 0.025%. Available in SO-12 package with worldwide shipping from stock.
Low power voltage regulator
STMicroelectronics L4989D013TR is an automotive-grade fixed-output low-dropout linear voltage regulator supporting input voltages from 5.6 V to 31 V with a maximum of 40 V. It features an ultra-low dropout voltage of 0.18 V, line and load regulation of 0.025%, and is supplied in an 8-pin SOIC package on tape and reel. Compliant with automotive standards for use in vehicle electronic control units and power management systems.
Rail-to-rail input/output 5V CMOS Op-Amp, micro-power (29uA), GBP=1.3MHz, single with standby
STMicroelectronics L5300EPT is a positive fixed linear voltage regulator delivering up to 300mA output current with 5.6V to 31V input range and ultra-low 0.5V max dropout voltage. Housed in a compact PPAK 4-lead SMD package for space-saving designs. Available from stock with worldwide shipping.
Mainstream Arm Cortex-M0+ 32-bit MCU, up to 256KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V
Output rail-to-rail micropower operational amplifiers
Low / High side bidirectional, zero-drift, current sense amplifiers
Precision rail-to-rail input / output 36 V, 22 MHz dual op-amps
Operational Amplifiers - Op Amps Low power, rail-to-rail output, 36V operational amplifier
Low / High side bidirectional, zero-drift, current sense amplifiers
IC GATE DRVR HALF-BRIDGE 14SO
Very low clamping Ethernet 10 Gbps single line ESD protection
Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C
Rail to rail input/output 5V CMOS Op-Amp, micro-power (10uA), GBP = 450kHz, single
Output rail-to-rail micropower operational amplifiers
ROHS COMPLIANT, SOT-323, SC-70, 5 PIN
Rail-to-rail input/output 5V CMOS Op-Amps, micro-power (29uA), GBP=1.3MHz, small offset, dual
Output rail-to-rail micropower operational amplifiers
Rail-to-rail input/output 5V CMOS Op-Amp, micro-power (29uA), GBP=1.3MHz, single
Automotive Low Drop Voltage Regulator
Rail to rail input/output 5V CMOS Op-Amps, micro-power (10uA), GBP=450kHz, small offset, dual
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote