Integrated Circuit

The LT3015IMSE-3.3#PBF is a fixed -3.3V negative linear voltage regulator delivering up to 1.5A output current with a low 0.31V typical dropout voltage in a 12-MSOP package. It operates from -3.8V to -30V input and is optimized for low-noise, high-accuracy negative rail applications.

Analog Devices, LT1767EMS8#PBF Step-Down Switching Regulator, 1-Channel 1.5A Adjustable 8-Pin, MSOP

Power Management Specialized - PMIC Secondary-Side Optocoupler Driver Secondary-Side Optocoupler Driver

Power Switch ICs - Power Distribution 7A Ideal Diode with Reverse Input Protection

Comparator Dual 18V Automotive 6-Pin TSOT-23 T/R

Multiplexer Switch ICs SMBus 8/Ch Single-Ended Mux

Conv DC-DC 1V to 5V Single-Out 1.22V to 30V 0.5A Micropower 8-Pin MSOP T/R

Current Sense Amplifiers Hi V, Hi-Side C Sense Amp in SOT-23

Switching Voltage Regulators Wide Input Voltage Range Boost/SEPIC/Inverting Converter with 5A, 40V Switch

Prescaler 5V Divide By 1/2/4/8 24000MHz 16-Pin LFCSP EP Cut Tape

IC TRANSCEIVER FULL 1/1 8SOIC

Multiplexer Switch ICs Monolithic CMOS Analog Multiplexers

The HMC204MS8GETR is a passive SMT frequency doubler from Analog Devices operating over a 4 GHz to 8 GHz input band, handling up to 27 dBm CW input power with 50-ohm characteristic impedance in an 8-lead surface-mount package.

The LT1125CN#PBF is a quad low-noise precision operational amplifier featuring ultralow input offset voltage of 210 µV max, 106 dB CMRR, and voltage-feedback architecture in a 14-pin DIP package. Ideal for instrumentation and audio applications.

LTC6247IMS8#PBF is a dual 180 MHz rail-to-rail input/output op-amp from Analog Devices, featuring 1 mA per-amplifier supply current and 76 dB minimum CMRR. From $3.20 in stock worldwide shipping.

SP Amp Current Sense Amp Dual 60V Automotive 8-Pin MSOP Tube

MAXIM INTEGRATED PRODUCTS - MAX9890BETA+T - Audio Control, 2 Channel, Click / Pop Suppressor, 2.7V to 5.5V, TDFN, 8 Pins, -40 °C

Analog Switch ICs Ultra Small Low Ron DPDT Analog Switch,1 Circuit IC Switch 1:1 350mOhm 9-WLP (1.61x1.61)

LTC1967IMS8#TR is an Analog Devices RMS-to-DC converter in 8-pin MSOP with 390 µA supply current and 4 MHz bandwidth. It delivers 0.15% max linearity error for accurate true-RMS AC measurement. Available from stock with worldwide shipping.

SP Amp Current Sense Amp Dual 60V Automotive 8-Pin MSOP T/R

Micropower Op Amp, Comparator and Reference

Microchip PIC16F18115-I/MD is an 8-bit PIC16 MCU in a DFN-8 package with 14 KB Flash, 512 B RAM, 128 B EEPROM, a 12-bit differential ADCC, dual 16-bit PWM, and 32 MHz max clock for compact sensor and control applications.

IC MCU 8BIT 8KB FLASH 20VQFN

The MCP6499T-E/ST is a quad 30 MHz voltage-feedback operational amplifier from Microchip, optimized for the extended industrial temperature range. It delivers a 92 dB typical CMRR and 1600 µV maximum input offset voltage in a 14-pin TSSOP package. Well-suited for active filter, signal conditioning, and sensor interface applications in industrial and consumer systems.

Microchip MCP4641-103E/ML is a dual-circuit 10 kOhm digital potentiometer with 129 taps, I2C interface, non-volatile memory, and 1 kHz bandwidth in a compact QFN-16 package for programmable resistance and voltage adjustment applications.

FPGA - Field Programmable Gate Array A3P250-1FG144M

The PIC18F46Q71-I/P is an 8-bit PIC18 microcontroller from Microchip running at up to 64 MHz with 64 KB Flash, 4 KB RAM, dual op-amps, a 12-bit differential ADC with computation, DMA channels, and DAC outputs in a 40-pin DIP package for embedded sensing and control.

FPGA - Field Programmable Gate Array AX250-2FG256

EEPROM

The MIC4468ZWMTR is a quad, non-inverting low-side MOSFET gate driver capable of sourcing and sinking 1.2 A peak current. It features AND-gate based logic inputs and operates from 4.5 V to 18 V supply. Ideal for motor drives, DC-DC converters, and power switching applications.

The MCP6496UT-E/LT is a single voltage-feedback operational amplifier from Microchip in an SC70-5 package. It provides a minimum 66 dB CMRR, 92 dB typical CMRR, and a maximum input offset voltage of 1600 µV with internal frequency compensation. Suitable for signal conditioning, filtering, and sensor interface circuits in portable and space-constrained designs.

The MCP6496T-E/LT is a single 30 MHz voltage-feedback operational amplifier with 66 dB minimum CMRR and 1600 µV maximum input offset voltage, packaged in a compact SC70-5 (SOT23-5) for space-constrained signal conditioning applications.

The LAN91C111I-NE is a single-chip 10/100 Mbps Ethernet controller with integrated PHY from Microchip, offering a parallel host-bus interface in a 128-pin TQFP package. It supports both 10Base-T and 100Base-TX standards with auto-negotiation and full-duplex operation. Available for embedded networking designs in industrial, telecommunications, and consumer electronics systems.

Switching Controllers 75V, Dual Phase Advanced COT PWM Controller

The Microchip PD69210D1-VVVVSS is a Power over Ethernet (PoE) PSE controller IC supporting IEEE 802.3af/at standards for managing power delivery to PD devices. It integrates classification and detection in a compact 32-pin QFN package with 0.5 mm terminal pitch and CMOS technology. Suitable for enterprise switches, industrial PoE injectors, and managed networking equipment.

Rectifiers High Voltage Rectifier

8-bit Microcontrollers - MCU 64KB, 8KB RAM, 20p, 24MHz, MVIO, 12b ADC, ZCD, DAC, 2xUART, SPI, TWI

The MIC39300-2.5BU is a fixed 2.5 V, 3 A low-dropout linear regulator in a TO-263-3 surface-mount package, accepting input voltages from 2.5 V up to 16 V. It features a typical dropout voltage of 385 mV at full load. Suited for post-regulation of switching supplies, FPGA core rails, and high-current embedded system power applications.

The MCP251863T-E/SSVAO is a stand-alone CAN FD controller and CAN FD transceiver combo IC from Microchip with an SPI interface, supporting clock rates up to 40 MHz. It integrates both the protocol controller and physical layer in a single 28-pin SSOP package with low-power mode and AEC-Q100 Grade 1 automotive qualification. Ideal for automotive and industrial CAN FD network nodes.

The PIC16F18124-I/SL is an 8-bit PIC microcontroller from Microchip with 7 KB Flash, 512 B RAM, 128 B EEPROM, and a 12-bit differential ADCC running up to 32 MHz. It operates from 1.8 V at 16 MHz making it suitable for battery-powered sensor nodes. Housed in a 14-pin SOIC, it integrates dual 16-bit PWM modules for compact motor and LED control designs.

The PIC16F18026-I/SL is an 8-bit PIC microcontroller in a 14-pin SOIC package running up to 32 MHz, integrating 28 KB Flash, 2 KB RAM, 10-bit ADC, 8-bit DAC, three PWM channels, and hardware CRC for embedded control and sensor interface applications.

The PIC32MZ2064DAL169-V/HF is a 32-bit PIC32 microcontroller with 2 MB Flash, running at up to 64 MHz with an instruction cache, integrated graphics controller, and a 24-bit address bus in a 169-ball LFBGA package. It supports boundary scan (JTAG) for production test and targets V-grade extended temperature applications. Ideal for HMI panels, industrial displays, and embedded graphics applications requiring a high-performance 32-bit MCU with on-chip graphics acceleration.

The PIC16F18146-I/SO is an 8-bit PIC16 microcontroller with 28 KB Flash, 512 B RAM, 128 B EEPROM, 12-bit differential ADCC, dual 16-bit PWM, and DAC, operating up to 32 MHz from a 1.8 V minimum supply, in a 20-pin SOIC package for low-power embedded control.

ARM Microcontrollers - MCU 100TQFP, 512KB Flash, 48Mhz, T&R, 105C, w/ CAN

Microchip A40MX04-2PL84I is an FPGA with 69 I/O pins in an 84-pin PLCC package, part of the ACT 1 family targeting low-power programmable logic designs. It offers gate array architecture with 1,000 usable gate equivalents and industrial-temperature rated operation. Available in stock with worldwide shipping.

Ethernet ICs 8-Port 100BASET-T1 Industrial Switch

Microchip MCP6496T-E/OT is a single-channel voltage-feedback operational amplifier with 92 dB typical CMRR and 1600 µV maximum input offset voltage in a compact SOT-23-5 package. It delivers precise signal amplification for sensor interfaces, battery-powered instruments, and general-purpose analog circuits.

ARM® Cortex®-M23 PIC® 32CM Microcontroller IC 32-Bit 48MHz 256KB (256K x 8) FLASH 64-VQFN (9x9)

ARM Microcontrollers - MCU CM23, ULP, Touch, Security, 512K Flash, 48 Pin TQFP

Ethernet Switch IEEE 802.3, 100 Base-T PHY MII, RGMII, RMII, SGMII, SPI Interface 128-TQFP (14x14)