93C56C-E/STG Microchip Integrated Circuit (Small Outline Packages) In Stock

93C56C-E/STG is a 2-Kbit low-voltage serial EEPROM with a 3-wire SPI-compatible interface operating at up to 3 MHz in an 8-pin TSSOP package. It supports 1,000,000 write/erase cycles and 200-year data retention for reliable non-volatile storage. Available in stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
93C56C-E/STGSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 2-Kbit serial EEPROM with 3 MHz max clock speed and 3-wire SPI-compatible interface for simple microcontroller integration
  • 1,000,000 write/erase cycle endurance with 200-year minimum data retention for long-life non-volatile configuration storage
  • 8-bit or 16-bit selectable memory organization in a compact 8-lead TSSOP package for space-constrained PCB designs

Applications

93C56C-E/STG is suited for storing non-volatile configuration parameters, calibration data, and device identifiers in consumer electronics, industrial controllers, and automotive modules where a small serial EEPROM is needed. Its 2-Kbit capacity and 3-wire interface allow microcontrollers to read and write settings such as network addresses, sensor trim values, and feature flags without a larger Flash or FRAM device. The 8-pin TSSOP footprint minimizes board area in compact designs such as smart meters, remote controls, and IoT edge nodes.

Specifications

Pbfree CodeYes
YTEOL5
Alternate Memory Width8
Clock Frequency-Max (fCLK)3MHz
Data Retention Time-Min200
Endurance1000000 Write/Erase Cycles
JESD-30 CodeR-PDSO-G8
JESD-609 Codee3
Memory Density2048bit
Memory IC TypeEEPROM
Memory Width16
Number of Functions1
Number of Words128words
Number of Words Code128
Operating ModeSYNCHRONOUS
Organization128X16
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP8,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Parallel/SerialSERIAL
Qualification StatusNot Qualified
Serial Bus TypeMICROWIRE
Standby Current-Max0.000005A
Supply Current-Max0.002mA
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)4.5V
Supply Voltage-Nom (Vsup)5V
Surface MountYES
TechnologyCMOS
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Write Cycle Time-Max (tWC)2ms
Write ProtectionSOFTWARE
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.32.00.51
Country of OriginThailand

Datasheet

93C56C-E/STG Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How many write cycles does 93C56C-E/STG support and how does this affect longevity in data-logging applications?

93C56C-E/STG supports 1,000,000 write/erase cycles per byte location, which at one write per minute equates to nearly 2 years of continuous cycling before wear-out. For typical configuration storage where writes occur only during setup or calibration — perhaps a few hundred writes per year — the device would last over 1,000 years in practical use, far exceeding product lifetimes.

What interface speed does 93C56C-E/STG support and how does it connect to a microcontroller?

93C56C-E/STG operates with a 3-wire SPI-compatible serial interface at up to 3 MHz clock frequency, requiring only CS, CLK, and DI/DO signals from a microcontroller GPIO or dedicated SPI peripheral. This low pin count eliminates the need for a parallel bus interface, reducing I/O consumption and simplifying PCB routing for embedded designs with limited GPIO.

How does 93C56C-E/STG compare to an I2C EEPROM for automotive calibration data storage?

Unlike I2C EEPROMs that require address pins to distinguish multiple devices, 93C56C-E/STG uses a single chip-select line for device addressing on the SPI bus, making it simpler to gang multiple devices on one bus. For automotive calibration storage where data is written at end-of-line and read during operation, the 2-Kbit capacity and 200-year data retention ensure calibration data survives the 15-year vehicle lifetime with wide margin.

Can 93C56C-E/STG store both 8-bit and 16-bit wide data words and why does this matter?

Yes, 93C56C-E/STG supports selectable 8-bit or 16-bit memory organization via the ORG pin, allowing 256 x 8-bit or 128 x 16-bit access modes. The 16-bit mode is useful when storing 16-bit calibration coefficients or configuration words in a single read/write transaction, halving the number of SPI operations needed and reducing firmware complexity in word-oriented microcontroller architectures.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea