MCP6486UT-E/OT Microchip Integrated Circuit (SOT23 (5-Pin)) In Stock
The MCP6486UT-E/OT is a single 10 MHz voltage-feedback operational amplifier from Microchip in a 5-pin SOT-23 package. It provides 110 dB typical common-mode rejection ratio and 1600 µV maximum input offset voltage for accurate signal amplification. Well suited for active filters, sensor signal conditioning, and portable instrumentation operating across the extended temperature range.
- Manufacturer
- Microchip
- Package
- SOT23 (5-Pin)
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- MCP6486UT-E/OT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.1975(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 10 MHz gain-bandwidth product for wideband signals
- 110 dB typical common-mode rejection ratio
- 1600 µV maximum input offset voltage
- Compact 5-pin SOT-23 package
- Voltage-feedback architecture with frequency compensation
- Extended temperature range operation
Applications
The MCP6486UT-E/OT targets single-channel signal amplification tasks in space-constrained portable instruments, wearable sensors, and IoT endpoint nodes. Its 10 MHz bandwidth and high CMRR make it suitable for active low-pass and band-pass filter stages that process sensor outputs from pressure, temperature, and strain gauge transducers. The compact SOT-23 package and tape-and-reel format support automated high-volume manufacturing.
Specifications
| Manufacturer Package Code | SOT-23-5 |
| Factory Lead Time | 6Weeks |
| YTEOL | 23 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Common-mode Reject Ratio-Min | 66dB |
| Common-mode Reject Ratio-Nom | 110dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 1600 µV |
| JESD-30 Code | R-PDSO-G5 |
| JESD-609 Code | e3 |
| Low-Bias | NO |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP5,.11,37 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH |
| Packing Method | TR |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Slew Rate-Nom | 20V/us |
| Supply Current-Max | 0.72mA |
| Supply Voltage Limit-Max | 6V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 10000 |
| Voltage Gain-Min | 177827.941 |
| Wideband | NO |
| Package | SOT23 (5-Pin) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the MCP6486UT-E/OT's 10 MHz gain-bandwidth compare to a standard 1 MHz op-amp for active filter design?
With a 10 MHz gain-bandwidth product, the MCP6486UT-E/OT provides 10 times the bandwidth of a typical 1 MHz op-amp, allowing active filters with cutoff frequencies up to several hundred kilohertz while maintaining adequate gain margin. This makes it suitable for anti-aliasing filters ahead of high-speed ADCs sampling above 100 kHz, whereas a 1 MHz op-amp would introduce significant phase error in the same circuit.
What does the MCP6486UT-E/OT's 110 dB CMRR mean for a differential sensor measurement circuit?
A 110 dB common-mode rejection ratio means the MCP6486UT-E/OT attenuates common-mode interference such as 50 Hz or 60 Hz mains noise by over 300,000 times relative to the differential signal. In a Wheatstone bridge measurement with a 10 mV differential output and 1 V common-mode noise, the amplified output will have less than 3 µV of noise contribution from the common-mode interference, enabling accurate 16-bit resolution measurements.
For a compact wearable PCB, how does the MCP6486UT-E/OT's 5-pin SOT-23 package reduce board space compared to an 8-pin SOIC?
The 5-pin SOT-23 package of the MCP6486UT-E/OT measures approximately 2.9 mm × 1.6 mm, occupying roughly 4.6 mm², compared to the SOIC-8 footprint of about 30 mm². For a wearable device with 10 amplifier channels, switching to SOT-23 saves approximately 250 mm² of board area, which is significant in wristband or patch form-factor designs where every square millimeter of PCB real estate matters.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.3000 | $0.30 |
| 25+ | $0.2500 | $6.25 |
| 100+ | $0.2300 | $23.00 |
| 5000+ | $0.2200 | $1100.00 |
| 12000+ | $0.2020 | $2424.00 |
| 27000+ | $0.1975 | $5332.50 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”