Integrated Circuit

Analog Devices DG508AAK/883B is an analog switch for electronic assemblies. It is specified around 16 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

Supervisory Circuits 3.3/5V MicroMonitor

Temperature Sensor Analog, Local -50°C ~ 150°C 22.5mV/°C TO-92-3

Ethernet ICs 10/100 Base Tx Transcvr w/MDIX-IND

MAX811TEUS+T is a microprocessor supervisor with manual reset and active-low reset output by Analog Devices, operating from 1.2 V to 5.5 V input in a 4-pin SOT-23 package. It monitors supply voltage and asserts a clean reset pulse for microcontrollers and processors in industrial, consumer, and portable electronic designs.

300 MHz TigerSHARC Processor with 6 Mbit on-chip SRAM

Board Mount Temperature Sensors 1-Wire Parasite-Power Digital Thermometer

Triple Transmitter Quint Receiver RS-232 28-Pin TSSOP T/R

The MAX6315US29D3+T is a microprocessor supervisor IC with a 2.93 V reset threshold, 336 ms reset timeout delay, active-low open-drain output, and supports 1 V to 5.5 V supply voltage in a 4-pin SOT-23 package for reliable system reset control.

Analog Devices HMC839LP6CE is a high-performance PLL with integrated VCO operating from 1930 to 2380 MHz, housed in a 40-lead QFN package for compact RF module designs. It combines phase-locked loop and voltage-controlled oscillator functions for low-phase-noise signal synthesis.

1.5A Low Dropout Positive Regulators Adjustable and Fixed 2.85V, 3.3V, 3.6V, 5V, 12V

Voltage Comparator, Single, 8 Pin, Plastic, SOP

Series Voltage Reference IC Fixed 10V V ±0.3% 10 mA TO-5-3

Analog Switch ICs 2.5ohm Max Ron +/-15V/+12V/+5V iCMOS SPST

The MAX20303LEWN+T is an integrated PMIC from Analog Devices with ultra-low IQ voltage regulators, a Li-ion battery charger, and a fuel gauge in a 56-ball WLCSP package. It provides 8 power management channels for compact wearable and IoT systems powered by small lithium-ion cells.

USB Switch ICs USB Host Adapter Emulator with Advanced CDP Emulation

The MAX14654EWC+T is a high-current overvoltage protector IC from Analog Devices with an adjustable overvoltage lockout (OVLO) threshold, designed to protect sensitive downstream circuits in a 12-bump WLCSP package. It monitors input voltage and disconnects the load when an overvoltage event is detected. Available in stock with worldwide shipping.

MAX3645ESE+T is a Analog Devices operational amplifier IC for signal conditioning and data acquisition. It combines 16 pins, Small Outline Packages, 2.97V for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Switching Voltage Regulators For MAX17630A: 4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter with 3.3V Output Voltage; For MAX17630B: 4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter with 5V Output Voltage; For MAX17631A: 4.5V to 36V

RS-422/RS-485 Interface IC +5.0V, +/-15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422Transceivers

Switching Voltage Regulators 60V Synchronous Step-down Regulator with Integrated Dual 5V, 1A POL

The MAX22701EASA+T is an ultra-high CMTI isolated gate driver optimized for Silicon Carbide (SiC) MOSFETs and IGBTs. It provides strong peak gate drive current with high common-mode transient immunity to reliably switch wide-bandgap devices at high dV/dt rates. Packaged in an 8-SOIC for industrial inverter and EV power conversion designs.

VCO Oscillators VCO w/ Fo/2 & Div/4, 11.5 - 12.5 GHz

Clock Buffer Ultralow Jitter, 7.5GHz, 11 Output Fanout Buffer Family

General Purpose Amplifiers SO-14 RoHS

Power Management Specialised - PMIC Power Supply On/Off Sequencer

Quad-Channel Isolators with Integrated DC-to-DC Converter (2:2 directionality)

50ppm/°C (max) Temperature Coefficient Guaranteed over the -40°C to +125°C Temperature RangeUltra-Small 3-Pin SC70 Package0.1% (max) Initial AccuracyWide Operating Current Range: 60µA to 15mALow 28µVRMS Output Noise (10Hz to 10kHz)1.225V, 2.048V, 2.500V, 3.000V, 3.3V, 4.096V, and 5.000V Fixed Reverse Breakdown VoltagesNo Output Capacitors RequiredTolerates Capacitive LoadsAEC-Q100 Qualified, Refer to Ordering Information for the Specific /V Versions

Power Management Specialised - PMIC Wearable Power Management Solution with Low Iq Display

16-Bit, 4-Channel/8-Channel, 250 kSPS PulSAR ADCs, 20-lead 2.4 mm × 2.4 mm WLCSP package

LT1004CZ-1.2#PBF is a two-terminal shunt voltage reference IC with a fixed 1.235 V output and ±0.3% initial accuracy, supporting up to 20 mA operating current. It comes in a TO-92-3 through-hole package and is well-suited for precision analog circuits requiring a stable low-voltage reference with minimal external components.

100V Flyback Regulator Positive, Isolation Capable Output Step-Up/Step-Down DC-DC Controller IC 16-MSOP

IC SWITCH TRIPLE SPDT 16TSSOP

LTC3876IUHF#PBF is a dual-output DDR voltage regulator controller from Analog Devices using current-mode controlled on-time architecture. Key specs: 4.5 V to 38 V input range, adjustable outputs from 1 V to 2.5 V, and dual-channel operation in a 38-pin QFN (5x7) package. Available in stock with worldwide shipping.

Digital Signal Processors & Controllers - DSP, DSC 400 MHz SHARC in an LQFP package

400MHz SHARC+ DSP with 640KB L1, 256KB Shared L2 SRAM, 120-lead LQFP_EP

Interface - I/O Expanders I C Port Expander with 4 Push-Pull Outputs and 4 Inputs

The MAX1127EGK+D is a quad 12-bit analog-to-digital converter sampling at up to 65 MSPS from a 1.8 V supply in a compact 68-pin LFCSP package. It offers four simultaneous ADC channels with excellent linearity for demanding RF, communications, and instrumentation applications.

LTC4091EDJC#TRPBF is a 36 V linear battery charger and power backup manager IC from Analog Devices, designed for single-channel Li-ion or Li-polymer backup battery systems. It features adjustable charge thresholds, integrates charger and power path management in a 22-pin DFN package, and suits industrial and telecom equipment requiring battery backup up to 36 V.

DS28C39Q+U is a Analog Devices integrated circuit for industrial electronics and embedded systems. It combines 7 pins, Small Outline No-lead for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Analog Comparators Dual nanoPower Comparator with Built-In Reference

Digital to Analog Converters - DAC 16-Bit Dual SoftSpan Iout DAC with Parallel I/O (1LSB INL)

LTC1059CS is a switched-capacitor universal active filter IC with a tunable cutoff frequency from 0.1 kHz to 40 kHz in a 14-pin SOIC package. It supports lowpass, highpass, bandpass, and notch configurations with clock-tunable response, making it ideal for anti-aliasing, data acquisition, and audio signal conditioning designs.

Battery Management IC, ULP PMU CHG FG BP Buck BB WLCSP

LT1528CQ#PBF is a low-dropout linear voltage regulator from Analog Devices providing up to 3 A output current with a fixed or adjustable positive output voltage, featuring a typical dropout voltage of only 0.57 V and a maximum input voltage of 15 V in a 5-pin DDPAK package.

The LTC7060 is an Analog Devices 100 V half-bridge gate driver with floating high-side and low-side drives, programmable dead-time control, and robust protection features for motor drives and power conversion. It operates across industrial temperature ranges and is available from authorized distributors with worldwide shipping.

ADI IC, ULP PMU CHG FG BP Buck BB WLCSP

Accelerometer Triple ±10g/±20g 2.5V 73.6mV/g to 86.4mV/g/36.8mV/g to 43.2mV/g 14-Pin CLLCC Tray

MAX6628MKA+T is a remote digital temperature sensor from Analog Devices with ±1°C accuracy, serial I2C/SMBus interface, and 5.5°C maximum accuracy over the full range in an 8-pin SOT-23 package. Suited for board-mount thermal monitoring in servers, laptops, and industrial equipment.

Accelerometers Tri-Axis Analog Accel +/-10g/+/-40g