Integrated Circuit

MAX4800CQI+ is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 28 pins, 28-PLCC-N/A. From RFQ pricing with in-stock sourcing and worldwide shipping support.

MAX308EUE+T is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 16 pins, 16-TSSOP_4.4-4.4_MM, -40°C to 85°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.

IC SWITCH QUAD SPST 16SOIC

Schaltspannungsregler LV 5V Boost Converter

8-Channel, 12-Bit, Configurable ADC/DAC with On-Chip Reference, SPI Interface

MAX6765TTLD2/V+T is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 6 pins, 6-LFCSP-3X3X0.75, -40°C to 125°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.

MAX16834AGP/VY+ is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 20 pins, 20-LFCSP_SS-4X4X0.85, -40°C to 125°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.

ESD Suppressors / TVS Diodes Low-Capacitance, 2/3/4/6-Channel, 15kV ESD-Protection Arrays for High-Speed Data Interfaces

The MAX328EWE+T is an ultra-low-leakage, single-ended, monolithic CMOS 8-channel analog multiplexer in a 16-pin SOIC package. It operates from supply voltages of ±5 V to ±18 V with typical on-resistance below 200 Ω. Competitively priced and available in stock worldwide with fast shipping.

Analog Devices MAX25276ATCA/VY+T is a 36V input, 600mA/1.2A peak mini buck converter with current-mode PWM control. Supports 3.5V to 36V input range in a compact 12-LFCSP 3x3mm package. Available from stock worldwide with fast shipping.

4.5V to 36V, 1A Himalaya uSLIC Step-Down Power Module

Analog Devices MAX33012EASA+ is a +5V CAN FD/flexible data-rate transceiver IC with ±65V fault protection, ±25V common-mode range, and ±25kV ESD protection in an 8-pin SOIC package. It supports CAN FD data rates up to 5 Mbps and includes a standby mode for low-power operation. Available from authorized distributors with worldwide shipping.

Analog Devices MAX1577YETA+T is a regulated white LED driver with PWM dimming capability in a compact 8-pin TDFN package, designed to drive up to 4 LEDs in series from a single Li-ion cell. It operates from a 2.7 V to 5.5 V input, delivers up to 200 mA LED current, and supports 100:1 PWM dimming ratio. Available in tape-and-reel from authorized distributors with worldwide shipping.

RS-422/RS-485 Interface IC 20Mbps 60V Fault Protected RS485 Transceiver (Full Duplex)

Analog Devices MAX20303KEWN+T is a highly integrated PMIC for small Li-ion systems, combining ultra-low IQ voltage regulators, a battery charger, and a fuel gauge in a compact 56-bump WLCSP package. Available from stock with worldwide shipping.

The MAX6389XS31D2+T is a single-channel, low-power microprocessor supervisory/reset IC from Analog Devices in a compact 4-pin SC70 package. It monitors supply voltages with a 3.1 V reset threshold and provides reliable power-on reset for MCUs and digital systems. Available from stock worldwide with fast shipping.

Bidirectional Synchronous 100V Buck/Boost Controller with Reverse Supply, Reverse Current and Fault Protection

MAX20034ATIR/VY+T from Analog Devices is a dual switching controller for automotive high-voltage DC-DC power systems. Key specs include 3.5 V to 36 V input, current-mode PWM control, and 200 kHz to 2 MHz switching. RFQ sourcing supports in-stock offers and worldwide shipping.

Analog to Digital Converters - ADC Dual 12-bit, 80Msps Low Power ADC

Analog Devices MAX20034ATIS/VY+T is a dual high-voltage synchronous buck controller with ultra-low 17 µA quiescent current, supporting 3.5 V to 36 V input and switching frequencies from 200 kHz to 2 MHz. Features current-mode PWM control in a compact 28-LFCSP package for efficient DC-DC conversion.

IC INTERFACE SPECIALIZED 16DFN

Analog Devices MAX20034ATIR/VY+ is a dual high-voltage current-mode PWM switching controller supporting 3.5 V to 42 V input range with 17 µA quiescent current and 200 kHz to 2 MHz adjustable switching frequency in a 28-pin TQFN-EP package. It integrates a fixed 3.3 V LDO output and programmable dual output regulation for compact automotive and industrial power designs. Available from stock worldwide with volume pricing.

Analog to Digital Converters - ADC 16-bit, 500ksps Bipolar ADC with Internal Reference

High Speed Operational Amplifiers 650MHz Differential ADC Driver

Analog Devices MAXM17632AME+ is a non-isolated point-of-load DC-DC converter module delivering 1 A output from 4.5 V to 36 V input with adjustable 0.9 V to 12 V output in a compact 3x3 mm package. It integrates inductor and control circuitry using current-mode PWM with PFM support for high efficiency. Available from stock with worldwide shipping.

The Analog Devices MAX8614BETD/V+ is a dual-output current-mode PWM switching regulator for CCD and OLED power supply applications in a compact 3 mm x 3 mm TDFN package. It operates from a 3 V to 5.5 V input and supports adjustable outputs from 3 V to 24 V and -16 V to 0 V. Available in stock worldwide with fast shipping.

Active Filters LPF, Tunable, 2.2 to 4 GHz

Supervisory Circuits Single UV/OV Voltage Monitor

MAXM17631AME+ is a Analog Devices integrated circuit for industrial electronics and embedded systems. It combines 16 pins, 16-CSP_BGA_EM-3X3X1.55, -40°C to 125°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Supervisory Circuits Single UV/OV Monitor

Analog Devices MAX98307ETE/V+ is a 3.2 W mono Class DG multi-level speaker amplifier in a 16-pin 3×3 mm LFCSP package with 20 kHz audio bandwidth. Designed for high-efficiency digital audio amplification in portable and consumer electronics. RoHS compliant with worldwide shipping available.

IC DAS/ADC 12BIT 50K 20SOIC

Analog Devices MAX98307ETE/V+T is a 3.2W mono Class DG multi-level speaker amplifier IC with 20 kHz audio bandwidth in a compact 16-pin LFCSP 3x3 mm package. Features high-efficiency Class DG architecture delivering superior THD+N performance and reduced heat dissipation compared to Class D designs. Suitable for portable speakers, smartphones, and consumer audio applications requiring high output power in space-constrained designs.

Analog Devices MAX16822AASA/V+ is a 2 MHz high-brightness LED driver IC with integrated MOSFET and high-side current sense in an 8-SOIC package, enabling compact buck-topology LED current regulation for lighting applications. Supports wide input voltage range with precision current control. Available from stock with worldwide shipping.

MAXM15068AMB+ is an Analog Devices Himalaya uSLIC step-down power module with 7.5 V to 60 V input range and 200 mA output current. Current-mode PWM/PFM control enables high efficiency across industrial and automotive voltage rails. Available from Analog Devices in a compact 10-ball BGA module with worldwide shipping.

Translation - Voltage Levels Single 8Mbps 3.6V

MAX15093GWL+ is a Analog Devices power-management component for power-management designs. It supports 15A in a BGA package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

MAX7312AUG+T is a Analog Devices integrated circuit component for integrated circuit designs. It supports 1 channel in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

8 GHz to 16 GHz, 4-Channel, X Band and Ku Band Beamformer

Switching Voltage Regulators 4.5V to 42V Input, 300mA, fixed 5V output, Integrated Inductor, Compact Step-Down Power Module

MAX17853ACB/V+ is a 14-channel high-voltage data-acquisition IC optimised for multi-cell BMS designs. It achieves 12-bit precision over a ±2.5 V analog input range in a 64-LQFP package. In stock with worldwide shipping.

LED Lighting Drivers Synchronous Boost with Synchronous Buck LED Controllers

RS-422/RS-485 Interface IC 20Mbps 60V Fault Protected RS485 Transceiver (Full Duplex)

Analog Devices MAX1605EUT+T is a 30 V internal-switch boost converter IC specifically designed for LCD bias supply generation in portable and handheld devices. Operates from 2.4 V to 5.5 V input and delivers regulated high-voltage output for LCD panel biasing in a tiny 6-pin SOT-23 package. Available in tape-and-reel format for automated PCB assembly.

Fractional-N PLL with Integrated VCO SMT, 7.8 - 8.8 GHz

RS-422/RS-485 Interface IC +/-60V Fault Protected 3V to 5.5V RS485/R

Fractional-N PLL with Integrated VCO SMT, 7.8 - 8.8 GHz

Precision Amplifiers 1.5A Quad Prec R-to-R I/O OA

Digital to Analog Converters - DAC 8-Bit I2C DAC (2.5V ref, Reset to Zero-Scale)

MCU 32-bit ARM Cortex M3 RISC 128KB Flash Automotive 32-Pin LFCSP EP T/R