Integrated Circuit

Accelerometer Triple ±2g/±8g 3.3V 368mv/g to 432mv/g/92mv/g to 108mv/g 14-Pin CLLCC T/R

The MAX4514ESA+T is an Analog Devices low-voltage, low-on-resistance single-pole single-throw (SPST) CMOS analog switch in an 8-pin SOIC package, providing reliable signal routing for data acquisition and communications circuits. Available in tape-and-reel packaging with worldwide distribution.

Analog Devices MAX1196ECM+D is a dual 8-bit, 40 Msps analog-to-digital converter operating from a 3 V supply with an internal reference and multiplexed parallel outputs. Optimized for low-power dual-channel digitization in portable communications, imaging, and video processing applications.

Battery Management 200kHz, 1.5A Stepdn Bat Charger

Low-Cost Precision Sensor Signal Conditioner

Current & Power Monitors & Regulators >> MAX17612A: 4.5V to 60V, 200mA Overvoltage, Overcurrent Protector with Reverse Protection and UVLO/OVLO >> MAX17612B: 4.5V to 60V, 200mA Overvoltage, Overcurrent Protector with UVLO/OVLO >> MAX17612C: 4.5V to 60V, 200mA Overvoltage, Overcurrent Pro

LTM4613MPY#PBF is an Analog Devices ultralow-EMI step-down DC/DC power module accepting 5 V to 36 V input and delivering up to 8 A continuous output current with adjustable output voltage from 3.3 V to 15 V, using current-mode PWM control in a compact BGA power module package.

♦ Available in SOT23-5 Package ♦ +2V to +12V Single-Supply Operation ♦ Guaranteed On-Resistance: 20Ω with +5V Supply 10Ω with +12V Supply ♦ Guaranteed Low Off-Leak

LTC2226CUH#PBF is a 12-bit, 25 MSPS analog-to-digital converter from Analog Devices featuring a single differential input channel, 1 V to 1.9 V analog input range, and low-power CMOS architecture packaged in a 32-pin QFN for high-speed data acquisition systems.

MAX15093GWL+T is a 15 A eFuse hot-swap controller with an integrated power FET and adjustable overcurrent threshold. It provides inrush current limiting, overvoltage protection, and fault management for board-level power rails in servers and telecom equipment. Packaged in a compact 40-ball WLCSP for space-constrained high-density power designs.

Switching Voltage Regulators Ultralow EMI, 36V, 1A Step-down uModule Regulator LGA Package 71-Lead (15mm × 9mm × 2.82mm) (Reference LTC DWG # 05-08-1823 Rev Ø)

Fractional-N PLL with Integrated VCO SMT, 990 - 1105 MHz

Analog & Digital Crosspoint ICs +3.3V, 2.7Gbps Dual 2 x 2 Crosspoint Switch

Fractional-N PLL with Integrated VCO SMT, 990 - 1105 MHz

The LTC2377IMS-20#PBF is a 20-bit SAR ADC with 500 ksps sample rate, 104 dB SNR, and 0.5 ppm INL in a 16-pin MSOP package from Analog Devices. It features a serial SPI interface, 10.5 mW power consumption, and a wide analog input range from -2.5 V to 5.1 V for high-precision measurement. Suited for industrial instrumentation, medical imaging, and precision data acquisition systems requiring excellent linearity.

MAX4802ACCM+ is an 8-channel SPST analog switch with 38 Ω on-resistance, operating from 2.7 V to 6 V supply in a 48-pin LQFP package. It provides 33 dB off-state isolation and is designed for signal routing, test equipment multiplexing, and communication system switching applications.

IC AMPLIFIER 24QFN

The LT1634ACS8-5#PBF is a precision two-terminal 5 V shunt voltage reference with 0.05% initial accuracy and very low temperature coefficient, housed in an 8-pin SOIC package. It is designed for use in high-accuracy data conversion and instrumentation circuits. Available in global distribution with worldwide shipping.

► Maximum temperature coefficient (TCVOUT): ► 0.8 ppm/°C (D grade 0°C to 70°C) ► 1 ppm/°C (C grade 0°C to 70°C) ► 2 ppm/°C (B grade −40°C to +125°C) ► 4 ppm/°C (A grade −40°C to +125°C) ► Output noise (0.1 Hz to 10 Hz): ► 1 μV p-p at VOUT of 2.048 V typical ► Initial output voltage error: ► B, C, D grade: ±0.02% (maximum) ► Input voltage range: 3 V to 15 V ► Operating temperature: ► A grade and B grade: −40°C to +125°C ► C grade and D grade: 0°C to +70°C ► Output current: +10 mA source/−10 mA s

LTC3633EUFD#TRPBF is a dual 3 A monolithic synchronous step-down regulator from Analog Devices with 3.6 V to 15 V input range, 4 MHz switching frequency, current-mode control, and LDO fallback operation. Ideal for point-of-load regulation in communications, industrial, and processor power supply designs.

The MAX20303JEWN+T is a highly integrated PMIC from Analog Devices featuring ultra-low IQ voltage regulators, a lithium-ion battery charger, and a fuel gauge in a single 56-ball WLCSP. Designed for small Li-ion wearable systems, it integrates 8 channels of power management to minimize BOM and PCB area.

The MAX9788ETI+ is a single-channel Class G ceramic speaker driver from Analog Devices delivering up to 14 V peak-to-peak output swing and 2.4 W nominal output power. Housed in a 28-pin 4×4 mm LFCSP package, it targets mobile phones, tablets, and portable consumer devices requiring high acoustic output with minimal power dissipation.

The LTC2912CDDB-3#TRPBF is a single-channel under/overvoltage supervisor IC from Analog Devices with an adjustable threshold, programmable reset delay, and active-low open-drain reset output. It operates in an ultra-compact 8-pad DFN package and is suitable for power-rail monitoring in portable and industrial systems.

LT6658AHDE-1.2#TRPBF is a precision dual-output, high-current, low-noise voltage reference from Analog Devices with a 1.2 V output. It provides two independent regulated outputs in a 16-pin DFN package and features extremely low output noise for sensitive analog circuits. Designed for high-accuracy ADC references, instrumentation, and medical equipment demanding stable low-noise voltage references.

MAX7312ATG+T is a Maxim/Analog Devices 16-bit I/O port expander using a 2-wire I2C interface with interrupt output and hot-insertion protection. It provides 2 ports of 8 I/O lines each, configurable as inputs or outputs. Packaged in a 24-pin LFCSP (4×4×0.75 mm) for compact expansion of microcontroller GPIO.

Analog Devices MAX16822AASA/V+T is a 2 MHz high-brightness LED driver with integrated MOSFET and high-side current sensing, housed in an 8-pin SOIC package, designed for efficient LED lighting control in automotive and industrial applications.

Multiple Functions for Small Size • Synchronous 750mA Boost Converter - Fixed from 3.8V to 8.5V in 100mV Steps • Synchronous Buck Converter Up to 3A - Factory-Configurable Output Voltage from 0.8V to 3.8V in 25mV Steps - Resistor-Adjustable • 3.0V to 5.5V Operating Supply Voltage • 2.2MHz Operation • 93% ±3% Undervoltage Threshold • 107% ±3% Overvoltage Threshold • Individual EN_ Inputs and RESET_ Outputs ● High Precision • ±2% Output-Voltage Accuracy (OUT1), and ±1.5% Output-Voltage Accuracy

8 GHz 16-Bit Fractional-N PLL

LTC6560HUD#WPBF is a single-channel transimpedance amplifier (TIA) from Analog Devices designed for high-speed photodiode signal conversion. It converts input current to voltage with low noise and wide bandwidth, housed in a 16-pin QFN package for precision optical receiver designs.

Analog Devices, AD8553ARMZ

Analog Devices LTC6908CS6-1#PBF is a CMOS output, resistor-programmable oscillator operating from 0.05 MHz to 10 MHz with a 9 ns maximum fall time, housed in a compact 6-pin SOT-23 package. Its frequency is set by an external resistor, eliminating the need for crystals or trimmers in low-cost clock generation designs. Ideal for microcontroller clocking, PWM generation, and frequency reference applications in space-constrained boards.

Arm® Cortex®-A7 up to 1 GHz, LCD-TFT, camera interface, 2×ETH, 2×CAN FD, 2×ADC, 24 timers, audio, crypto and adv. security

The STEF512SRIPUR is a dual-channel electronic fuse (eFuse) IC from STMicroelectronics, protecting both 5 V and 12 V supply rails with integrated reverse current blocking. In a 20-pin SOIC package, it provides 2 independent fuse channels with programmable current limiting and auto-retry capability for robust power path protection.

STMicroelectronics STM32MP131FAF7T is a single-core ARM Cortex-A7 microprocessor running up to 1 GHz with integrated Ethernet, 12-bit ADC, 24 timers, audio interfaces, and hardware cryptographic security. It targets industrial HMI, gateway, and secure edge computing applications in a BGA package.

Arm® Cortex®-A7 up to 1 GHz, LCD-TFT, camera interface, 2×ETH, 2×CAN FD, 2×ADC, 24 timers, audio, crypto and adv. security

Arm® Cortex®-A7 up to 1 GHz, LCD-TFT, camera interface, 2×ETH, 2×CAN FD, 2×ADC, 24 timers, audio, crypto and adv. security

Arm® Cortex®-A7 up to 1 GHz, LCD-TFT, camera interface, 2×ETH, 2×CAN FD, 2×ADC, 24 timers, audio, crypto and adv. security

STM32U595VJT6Q is a 32-bit ARM Cortex-M33 ultra-low-power microcontroller from STMicroelectronics with up to 160 MHz clock, 4 MB Flash, and 786 KB SRAM in a LQFP-100 package with AEC-Q100 automotive qualification. Suitable for IoT edge devices, wearables, and smart industrial sensors.

Arm® Cortex®-A7 up to 1 GHz, LCD-TFT, camera interface, 2×ETH, 2×CAN FD, 2×ADC, 24 timers, audio, crypto and adv. security

STM32MP133DAF7 is a single-core 32-bit ARM Cortex-A7 microprocessor running up to 1 GHz, integrating dual Ethernet, 2x CAN FD, dual 12-bit ADC, and 24 timers for rich industrial connectivity. Housed in a 320-ball BGA package, it targets industrial HMI, gateway, and audio-enabled embedded Linux applications.

The STM32U599ZJT6Q is an ultra-low-power STMicroelectronics ARM Cortex-M33 32-bit microcontroller with TrustZone security, FPU, 240 DMIPS, up to 4 MB Flash, 2.5 MB SRAM, LTDC, and MIPI DSI display interface in a quad flat package, ideal for connected IoT and HMI applications. Available worldwide with approximately 13-week lead time.

STM32U5A9BJY6QTR is a 32-bit ARM Cortex-M33 ultra-low-power MCU with TrustZone, FPU, and 240 DMIPS performance. It integrates 4 MB Flash, 2.5 MB SRAM, LTDC display controller, MIPI DSI, and hardware crypto acceleration. Designed for IoT devices, wearables, and smart HMI applications requiring high security and low power consumption.

MAX9919NASA/V+T is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 8 pins, -20 V, 8-SOIC_N-150_MIL, -40°C to 125°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.

Hot Swap Voltage Controllers Hot Swap Contr. w/ADC and I2C

Analog Devices MAX16550AGPN+T is a 30 A integrated protection IC for 12 V bus applications, operating from 10.8 V to 13.2 V, housed in an 18-pin LFCSP package with adjustable threshold for bus protection.

ANALOG DEVICES - HMC797LP5E - RF Amplifier IC, 13.5 dB Gain / 6 dB Noise, DC to 22 GHz, 9 V to 11 V supply, QFN-32

LTM4657IY#PBF is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 49 pins, 8 A, BGA, -40°C to 125°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.

MAX6420UK31+T is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 5 pins, 5-SOT_23-N/A, -40°C to 125°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.

ADM5180APZ-REEL is an octal RS-232/RS-423 line receiver for multi-channel serial interface designs. It provides 8 receiver channels in a 28-pin PLCC package. Suitable for industrial terminals, instrumentation ports, and communication equipment needing reliable worldwide sourcing support.

MAXM17633AMG+ is a Analog Devices integrated circuit for industrial electronics and embedded systems. It combines 24 pins, 24-CSP_BGA_EM-4X4X1.55, -40°C to 125°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.