Integrated Circuit

Analog Devices MAX5900NNEUT+ is a single-channel hot-swap controller designed for -48 V telecom power systems, operating from -9 V to -100 V negative supply with adjustable current and voltage thresholds. Housed in a compact 6-pin SOT-23 package for space-efficient board-level power management.

U10CN+1

MAXIM INTEGRATED / ANALOG DEVICES - MAX5878EGK+D - Digital to Analogue Converter, High Dynamic Performance, LVDS Inputs, 16 bit, Parallel

14-Bit, 2.3Gsps Direct RF Synthesis DAC with Selectable Frequency Response

4.6Gsps Output Update Rate Direct RF Synthesis from 47MHz to 1003MHz No Aliasing of HD3 into Cable Band Industry-Leading DOCSIS 3.0 Performance Noise Floor -70dBc at fOUT = 900MHz, 8 Channel (256 QAM) -66dBc at fOUT = 900MHz, 16 Channel (256 QAM) -62dBc at fOUT = 900MHz, 32 Channel (256 QAM) -57dBc at fOUT = 500MHz, 128 Channel (256 QAM) High Output Power 9dBm (CW) Enables Low Solution Power4:1 Multiplexed LVDS Inputs Up to 1150Mwps Each Port Double Data Rate (DDR) Mode On-Chip DLL for Input Data Synchroni

0.6V to 5.5V Output, Parallelable, Average-Current-Mode DC-DC Controllers

MAX4721EBL+ is a 8.5A 5V integrated circuit by Analog Devices. Key specs: 8.5A, 5V, 9 pins. From quote-based pricing, in stock with worldwide shipping for production sourcing.

MAX5860FUXH+ is a 47MHz 1.006GHz voltage regulator by Analog Devices. Key specs: 47MHz, 1.006GHz, 280 pins. From quote-based pricing, in stock with worldwide shipping for production sourcing.

MAX4625EUT+

MAX5825AWP+ is a 5825A 20-W dac by Analog Devices. Key specs: 5825A, 20-W, 0.024%. From quote-based pricing, in stock with worldwide shipping for production sourcing.

Analog Devices MAX5078BATT+T is a low-side gate driver IC with differential input, available in inverting and non-inverting configurations, housed in a compact 6-pin LFCSP 3x3 mm package. Designed for high-frequency MOSFET switching in DC-DC converters, motor drives, and class-D amplifier power stages.

High-/Full-Speed USB 2.0 Switches

sc70-6

u10-2

The MAX4684EBC+ is a single-pole double-throw (SPDT) analog switch from Analog Devices offering 64 dB off-state isolation, 0.06 Ω on-resistance matching, and a single-channel CMOS switching function. Housed in a 12-ball WLCSP package measuring just millimeters across, it targets RF signal routing, audio path switching, and high-density portable electronics applications.

MAX4561EUT+ is a single-pole double-throw (SPDT) analog switch with 75 dB off-state isolation and rail-to-rail signal handling in a 6-pin SOT-23 package, operating from a single 5 V or dual ±4.5 V supply. It features low on-resistance and fast switching for audio, video, and signal routing applications. Available in stock worldwide for compact, portable signal-multiplexing designs.

Analog Devices MAX4599EXT+ is a single-channel SPDT analog switch with 76 dB off-state isolation and 0.2 Ω on-resistance matching, designed for precision signal routing in low-voltage portable systems. It comes in a miniature 6-pin SC-70 package for ultra-compact PCB designs.

MAX4634ETB+ is a Analog Devices integrated circuit for industrial electronics. It offers 2 pins, supporting reliable assembly in compact electronic equipment. From quote-based pricing, request stock for worldwide shipping.

Fault-Protected, High-Voltage Single 8-to-1/ Dual 4-to-1 Multiplexers with Output Clamps

The MAX4429MJA/883B is a high-speed, non-inverting single MOSFET gate driver capable of sourcing and sinking 6 A peak gate current for fast switching in power conversion circuits. Supplied in a military-grade 8-pin ceramic DIP package, it is qualified to MIL-883B and suited for aerospace, defense, and high-reliability industrial power electronics.

Upgrade for TSC4426/TSC4427/TSC4428 S Lower On Resistance: 4Ω vs. 7Ω S Shorter Delay Times: tD1 - 10ns vs. 30ns tD2 - 25ns vs. 50ns S 1.5A Peak Output Current S Fast Rise and Fall Times: Typically 20ns with 1000pF Load S Wide Operating Range: 4.5V to 18V S Low Power Consumption: 1.8mA with Logic 1 Input 200µA with Logic 0 Input S TTL/CMOS Compatible S Latchup Protected-Withstand > 500mA Reverse Current S ESD Protected

MAX4428MJA/883B is a Analog Devices Dual High-Speed 1.5A MOSFET Drivers 8 CERDIP**. Key details include 8 pins, Ceramic Dual-In-Line Packages packaging, and Integrated Circuit classification for production BOM review. Request current pricing for stocked supply and worldwide shipping.

Upgrade for TSC4426/TSC4427/TSC4428 S Lower On Resistance: 4Ω vs. 7Ω S Shorter Delay Times: tD1 - 10ns vs. 30ns tD2 - 25ns vs. 50ns S 1.5A Peak Output Current S Fast Rise and Fall Times: Typically 20ns with 1000pF Load S Wide Operating Range: 4.5V to 18V S Low Power Consumption: 1.8mA with Logic 1 Input 200µA with Logic 0 Input S TTL/CMOS Compatible S Latchup Protected-Withstand > 500mA Reverse Current S ESD Protected

The MAX44284HAWT+ is a high-precision, low-power current-sense amplifier from Analog Devices supporting up to 36 V common-mode input voltage. Featuring 145 dB CMRR, 28 µV max input offset voltage, and a 6-ball WLCSP package, it enables accurate current monitoring in compact power management and battery charging designs.

Analog Devices MAX4173TEUT+ is an integrated circuit for electronic assemblies. It is specified around 6 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

MAX4004EUT+ is a Analog Devices integrated circuit for embedded, industrial, and mixed-signal electronic designs. It provides 23-pin, SOT23 (6-Pin) details for compact PCB layouts and purchasing checks. From RFQ pricing, it supports in-stock sourcing and.

MAX4231ART+ is a single-channel general-purpose operational amplifier with ultra-low bias current (1 pA typical at 25°C) and 70 dB typical CMRR in a tiny 6-ball UCSP package. It features voltage-feedback architecture with frequency compensation, suited for precision sensor interfaces and portable measurement circuits.

RS-422 Interface IC +/-15kV ESD-Protected, 3.3V Quad RS-422 Transmitters

MAXIM INTEGRATED PRODUCTS - MAX3841ETG+ - Crosspoint Switch, 2x2 Array, Serial, +3 V to +3.6 V, TQFN-24

The MAX326CEE+T is a quad single-pole single-throw (SPST) analog switch from Analog Devices, providing four independent switching channels in a compact 16-pin QSOP package. It supports dual supplies up to ±18 V (nominal ±15 V) for wide analog signal range switching in precision instrumentation and test equipment. Available through global distribution with RoHS-compliant lead-free construction.

MAX3397EELA+ is a dual bidirectional voltage-level translator in a 2x2x0.75 mm µDFN-8 package, supporting low-voltage logic-level shifting with open-drain outputs and up to 1000 ns propagation delay. It enables seamless signal translation between different voltage domains in mixed-supply PCB designs. Ideal for I2C, SPI, and GPIO level-shifting in portable, IoT, and battery-powered systems.

MAX3362EKA+ is a Analog Devices integrated circuit for PCB-level interconnects, replacement sourcing, or production BOMs. Key specs include 8 pins, -40°C to 85°C operating range, SOT23 (8-Pin). From inquiry pricing, in stock sourcing, and worldwide.

The MAX2650EUS+T is a DC-to-microwave low-noise amplifier from Analog Devices operating from a +5 V supply with 16.5 dB gain and 50 Ω characteristic impedance in a compact 4-pin SOT-143 package. It supports maximum input power of 13 dBm and is designed for wideband RF signal amplification from DC to microwave frequencies.

The MAX20075ATCB/V+T is a 36 V input, 600 mA / 1.2 A synchronous mini buck converter with current-mode PWM control in a compact 12-pin 3x3 mm LFCSP package. It accepts inputs from 3.5 V to 36 V, targeting automotive, industrial, and distributed power rails requiring a small, efficient step-down regulator.

Digital Isolator CMOS 4-CH 150Mbps 16-Pin SOIC W Tube

MAX320CUA+T is a precision, dual-supply SPST analog CMOS switch in an 8-pin Mini-SO package. It operates from dual supplies up to ±8 V and is designed for low on-resistance, high-accuracy signal routing in instrumentation, data acquisition, and audio switching circuits.

The MAX2674EWT+ is a GPS/GNSS low-noise amplifier integrating an antenna switch and active bias circuit in a 6-ball WLP package. It delivers high gain and low noise figure optimized for 1575 MHz GPS L1 band reception, targeting compact portable navigation, asset-tracking, and IoT devices.

MAX2650EUS+ is a DC-to-microwave low-noise amplifier from Analog Devices covering 800 MHz to 1000 MHz in a compact SOT-143 package. It delivers 16.5 dB gain with 50 ohm characteristic impedance and operates from a +5 V supply. Ideal for cellular RF front ends, GPS receivers, and wideband amplifier chains requiring low noise at L-band and UHF frequencies.

Analog Devices MAX2661EUT+ is a high-frequency upconverter mixer IC supporting IF input frequencies from 40 MHz to 500 MHz with a 50 Ω characteristic impedance, packaged in a compact 6-pin SOT-23 surface-mount package. It is designed for wireless transmitter up-conversion stages in portable radio, ISM band, and telemetry applications.

The MAX2550ETN+ is a highly integrated WCDMA femtocell transceiver supporting Band I, V, and VIII with simultaneous GSM monitoring capability. It combines transmit and receive paths for indoor cellular coverage base station designs. Available in a compact QFN package targeting femtocell access points and small cell base station applications.

Analog Devices MAX253EUA+T is a 1 W primary-side H-bridge transformer driver for generating isolated DC-DC supply voltages. It drives a transformer with an H-bridge output stage in a compact 8-pin SOIC package, enabling galvanic isolation in RS-485, CAN bus, and industrial interface circuits.

36V, 600mA/1.2A Mini Buck Converter

MAX1722EZK+ is a PFM step-up DC-DC switching regulator in 5-pin SOT-23 with a 0.8 V to 5.5 V input range. Designed for single-cell battery-powered portable and wearable electronics. Available worldwide from authorized distributors.

Automotive Low-Voltage 2-Channel Step-Down Controller

MAX17270ENE+ is a Analog Devices power management IC for regulated supplies and battery-powered products. It combines 16 pins, 16-WLCSP-N/A, -40°C to 85°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

HMC311LP3 is a IC RF AMP GP 0HZ-6GHZ 16SMT by Analog Devices. Key specs: 16 pins, -40°C to 85°C, 0HZ. From inquiry pricing, available through FindMyChip sourcing with worldwide shipping.

The MAX17050X+ is a 1-cell Li-ion battery fuel gauge IC using the ModelGauge m3 algorithm for accurate state-of-charge estimation, available in a tiny 9-bump WLCSP package for space-critical portable and wearable designs.

The MAX1763EUE+T is a 1.5 A low-noise 1 MHz PWM step-up DC-DC converter from Analog Devices operating from an input voltage as low as 1.1 V up to 5.5 V. It uses voltage-mode PWM control and comes in a 16-pin TSSOP with exposed pad for thermal relief in portable and battery-backed boost applications.

Analog Devices MAX17510ATB+ is a low-voltage DDR linear regulator with 0.015% maximum load regulation and a single output in a compact 10-pin 3x3 mm LFCSP package, ideal for precise DDR memory power supply rails. Available worldwide with fast shipping.

MAX1724EZK30+ is a 3.0 V PFM boost converter from Analog Devices in a 5-pin SOT-23, with 0.8 V to 5.5 V input range. Targets single-cell battery-powered portable devices. Stocked worldwide with fast shipping from authorized distributors.