Integrated Circuit

IC SUPERVISOR 1 CHANNEL 8TDFN

RF Amplifier x2 Active mult SMT, 9 - 16 GHz Fout

iency. The VDDQ output voltage can be set to a preset 1.8V or 1.5V, or be adjuste

DS2502X1+U is a Analog Devices integrated circuit for industrial electronics. It offers 2 pins, supporting reliable assembly in compact electronic equipment. From quote-based pricing, request stock for worldwide shipping.

The Analog Devices MAX1558HETB+ is a dual-channel USB power switch IC with 1.2 A per channel capacity and programmable current limiting in a compact 3 mm x 3 mm 10-pin LFCSP package. It features autoreset overcurrent protection, fault flag outputs, and a 2.7 V to 5.5 V input range for robust USB bus management. Available from authorized distributors with confirmed stock and worldwide shipping.

ADP151AUJZ-3.3-R7/BKN is a Linear Voltage Regulator IC Positive Fixed 1 Output 200mA TSOT-23-5 for electronic system designs. Key details include 5 pins in SOT23 (5-Pin) from Analog Devices. It supports industrial power rails, embedded control boards, instrumentation supplies, and maintenance replacement builds with worldwide sourcing support.

Real Time Clock 3V/5V Real-Time Clock

MAXIM INTEGRATED PRODUCTS - DS2430AP+ - EEPROM, 256 bit, 32 x 8bit, Serial 1-Wire, TSOC, 6 Pins

IC OPAMP CFA 1 CIRCUIT 8SO

IC ADDRESSABLE SWITCH 6TSOC

5 Volt and 3.3 Volt MicroMonitor

DG408MY/PR+ is a Analog Devices 16-position integrated circuit for reliable PCB assembly and replacement sourcing. It uses a Small Outline Packages format with documented specifications for engineering review. Request quote-based stock, lifecycle support, and worldwide.

Supervisory Circuits 3.3V and 5.0V MicroMonitor

0.150 INCH, LEAD FREE, PLASTIC, SOP-14

Voltage References 1uA Precision SOT-23 Reference 10ppm, 0.05%

LTC2858IMS-2#TRPBF is an Analog Devices RS-485/RS-422 full-duplex line transceiver operating at 5 V with up to 250 kbps data rate, featuring differential Schmitt-trigger inputs and driver enables, in a 10-pin MSOP package for robust industrial serial communication links.

MAXIM INTEGRATED PRODUCTS - MAX4514EUK+T - Analogue Switch, 1 Channels, SPST, 5 ohm, 2V to 12V, SOT-23, 5 Pins

Temperature Sensor Analog, Local -25°C ~ 105°C TO-92-3

GaAs, pHEMT, MMIC, Single Positive Supply,??DC to 10 GHz Power Amplifier

Linear Voltage Regulator IC Positive or Negative Adjustable 1 Output 3A 5-DDPAK

Hot Swap Voltage Controllers High Voltage Current Limit

Multi-Phase Current Mode Step-Up DC/DC Controller

MAX22700DASA+ is an ultra-high CMTI isolated gate driver IC from Analog Devices with a 5.7 A peak output current in an 8-pin SOIC package. It provides high-side MOSFET driving capability with differential Schmitt-trigger inputs for robust noise immunity across isolation barriers. Designed for inverters, motor drives, and power converters demanding fast, reliable gate switching in high-voltage environments.

The LT1767EMS8E-5 is a 1.5 A, 1.25 MHz monolithic buck switching regulator from Analog Devices (Linear Technology) with a fixed 5 V output and 3 V to 25 V input range in an 8-pin MSOP package. It uses constant-frequency current-mode control for stable operation. Available in stock with worldwide shipping.

IC OPAMP GP 1 CIRCUIT 8SO

Complete DDR2 and DDR3 Power-Management Solution

50ppm/°C (max) Temperature Coefficient Guaranteed over the -40°C to +125°C Temperature RangeUltra-Small 3-Pin SC70 Package0.1% (max) Initial AccuracyWide Operating Current Range: 60µA to 15mALow 28µVRMS Output Noise (10Hz to 10kHz)1.225V, 2.048V, 2.500V, 3.000V, 3.3V, 4.096V, and 5.000V Fixed Reverse Breakdown VoltagesNo Output Capacitors RequiredTolerates Capacitive LoadsAEC-Q100 Qualified, Refer to Ordering Information for the Specific /V Versions

Analog Devices MAX17220ENT+ is a nanoPower synchronous boost converter accepting 0.4 V to 5.5 V input and regulating output from 1.8 V to 5 V with pulse-frequency-modulation control and true shutdown in a 6-bump WLCSP. Available from stock with worldwide shipping.

The MAX1609EEE+T is an octal SMBus-to-parallel I/O expander from Analog Devices providing 8 bidirectional I/O lines via a 2-wire SMBus interface. In a 16-pin QSOP package, it is used to expand GPIO resources on microcontroller-based systems with minimal bus wiring.

Switching Voltage Regulators 36V, 2.2MHz Step-Down Converter with Low Operating Current

MAX17000ETG+ is a complete DDR2 and DDR3 power-management IC from Analog Devices (Maxim) integrating a PWM step-down controller, VTT termination regulator, and voltage supervisors. It accepts a 3 V to 26 V input, supports adjustable output from 1 V to 2.5 V, and comes in a compact 24-pin LFCSP package for server and networking memory rails.

Analog Devices MAX1295 is a 12-bit successive-approximation ADC with up to 6 analog input channels, 265 ksps throughput, and an integrated 2.5 V reference operating from a single 3 V supply. Features a parallel interface for fast data transfer. Ideal for multi-channel data acquisition and industrial measurement systems.

Switching Voltage Regulators 36V, 2.2MHz Step-Down Converter with Low Operating Current

The MAX1556AETB+ is a current-mode PWM step-down DC-DC converter from Analog Devices with an input range of 2.6 V to 5.5 V and adjustable output from 0.75 V to 5.5 V or fixed 2.5 V and 3.3 V operation. It is housed in a compact 10-pin 3x3 mm LFCSP package for space-constrained portable and battery-powered applications.

MAX15027ATB+ is a BiCMOS adjustable LDO linear regulator from Analog Devices with a typical dropout voltage of only 75 mV and a single output in a compact 10-pin LFCSP (3x3x0.75 mm) package. Designed for low-noise, high-efficiency power rails in space-constrained portable and industrial electronics.

Analog Devices MAX15103EWL+ is a 3 A adjustable low-dropout linear regulator in a compact 2.7 mm x 1.6 mm 15-ball WLCSP package with 65 mV typical dropout voltage. Offers 0.15% per volt line regulation for stable output in space-constrained power designs. Available from authorized distributors with worldwide shipping.

The MAX16003ETE+T is a 6-channel voltage supervisor and reset IC with adjustable thresholds, open-drain outputs, and a manual reset input. It monitors up to 6 independent voltage rails and asserts reset signals when any rail drops below its threshold. Housed in a compact 16-TQFN (4x4 mm) package for dense multi-rail power management.

MAX15021ATI/V+ is a Analog Devices integrated circuit for industrial electronics and embedded systems. It combines 28 pins, 28-LFCSP-5X5X0.75, -40°C to 125°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Analog Devices MAX15096GWE+ is a single-channel input fault protection controller in a compact 16-bump WLCSP package with adjustable threshold, designed to protect downstream circuits from overvoltage and overcurrent faults. Available globally with fast shipping and competitive pricing.

MAX13055EETI+ is an 8-channel high-speed logic level translator supporting voltage levels from 1.62 V to 3.6 V per supply rail in a compact 28-pin LFCSP package. It enables bidirectional signal translation between different logic domains in mixed-voltage SoC and FPGA designs.

Analog Devices MAX149BMAP/PR3+T is a low-power 10-bit successive-approximation ADC with 8 analog input channels and a serial interface, operating from 2.7 V to 5.25 V with a maximum conversion time of 65 µs, housed in a 20-pin SSOP package. It is designed for portable data-acquisition instruments, battery-powered sensor hubs, and multichannel industrial monitoring applications.

The MAX15059BATE+ is a current-mode PWM switching regulator operating from a 2.8 V to 5.5 V input, with an adjustable mode extending operation from 7.8 V to 76 V for flexible boost or SEPIC topologies. Housed in a compact 16-pin 3x3 mm LFCSP QFN package, it delivers efficient DC-DC conversion for portable, industrial, and LED driver designs.

Maxim DS28EC20P+, 20kbit EEPROM Memory 64-Pin TSOC Serial-1 Wire

MAX14691ATP+T is a Analog Devices integrated circuit for embedded, industrial, and mixed-signal electronic designs. It provides Quad Flat No-Lead details for compact PCB layouts and purchasing checks. From RFQ pricing, it supports in-stock sourcing and.

The MAX147BEAP+T is an 8-channel, 12-bit successive approximation ADC operating from a 2.7 V to 5.25 V supply with a maximum conversion time of 65 µs. It communicates via a 3-wire SPI-compatible serial interface in a 20-pin SSOP package.

Translation - Voltage Levels MAX13058EETI+

Battery Battery Protection IC 15-WLP (1.57x2.14)

The MAX14509AEEVB+ is an Analog Devices evaluation board for the MAX14509AE USB 2.0 Hi-Speed audio DPDT analog switch IC featuring 2-channel switching, 65 dB off-state isolation, and 0.2 Ω on-resistance match. Enables rapid prototyping of USB and audio switching designs. Available in stock with worldwide shipping.

Analog Devices MAX13041ASD+T is a single-channel CAN bus transceiver IC supporting data rates up to 1000 Mbps, operating from -40°C to +125°C, housed in a 14-pin SOIC package. Designed for robust high-speed serial communication in automotive and industrial environments.

Dual Nonvolatile Digital Potentiometer and Secure Memory