Integrated Circuit

Operational Amplifiers - Op Amps DUAL 16V 35mA CBCMOS AMPLIFIER

IC REG BUCK 3.3V 1A 10TDFN

Dual Precision Op Amp

The LT1374CR-5#PBF is a current-mode fixed 5 V output buck (step-down) switching regulator capable of delivering 4.5 A output current from a 5 V to 25 V input range, with internal 500 kHz switching frequency for compact filter design. It is packaged in a 7-pin TO-263 surface-mount package and is lead-free for RoHS compliance. Available globally with stock for immediate shipping.

20mA, 3V to 80V Low Dropout Micropower Linear Regulator

LINEAR TECHNOLOGY - LTM2881IV-3#PBF - Transceiver RS422/RS485, 3V-3.6V supply, LGA-32

High-Efficiency Buck-Boost Regulator with 5A Switches, WLP 20 W201F2+1

The LTC3630EMSE#PBF is a wide input voltage synchronous buck DC/DC converter from Analog Devices operating from 4 V to 65 V input and delivering up to 500 mA adjustable output from 0.8 V to 65 V. Housed in a 16-pin MSOP package, it features Burst Mode operation for high efficiency at light loads and targets industrial, automotive, and instrumentation power supplies.

50MHZ TO 1000MHZ, 75DB LOGARITHM Detector/Controller

HMC1099LP5DE is a Analog Devices integrated circuit for production electronic assemblies. It uses 32 pins with Quad Flat No-Lead packaging. From RFQ pricing with stock checks and worldwide shipping.

Ultra-High PSRR Stereo Drivers + Microphone Amp + 100mA Linear Regulator

EV1HMC797APM5 is an evaluation PCB assembly for the HMC797A wideband low-power RF amplifier IC, covering DC to 20 GHz frequency range for rapid prototyping and performance characterization. The evaluation board provides SMA connectors and matched input/output networks for immediate lab testing. Available in stock for RF engineers needing fast design validation in wireless and test instrumentation applications.

Analog Devices MAX4298EUB+T is a single-channel line driver IC optimized for driving capacitive loads and transmission lines, featuring low distortion output in a compact 10-pin µMAX (MSOP) package, suitable for consumer and industrial analog signal distribution applications.

MAX3669ETG+ is a high-speed laser driver IC supporting data rates up to 622 Mbps for fiber-optic transmitter applications in a 24-pin TQFN (4 mm × 4 mm) package. Provides precise modulation current and bias current control for laser diode driving in SONET/SDH and ATM optical links. Suited for telecom line cards, SFP modules, and optical network equipment operating at OC-12 rates.

Ultra-High PSRR Stereo Drivers + Microphone Amp + 100mA Linear Regulator

LTC1479CG#PBF is a dual battery power path controller and battery monitor PMIC from Analog Devices with 3 monitoring channels in a 36-pin SOIC package. It manages automatic switchover between two battery sources for uninterrupted power in portable and backup power systems.

AD5620ARJ is a single-channel 12-bit nanoDAC from Analog Devices with a 5 ppm/°C on-chip reference, SPI-compatible interface, and 2.7 V to 5.5 V supply in a compact SOT-23 package. Designed for precision analog output in portable and space-constrained applications.

ADR02BUJ-R2 is an ultracompact precision 5.0 V voltage reference from Analog Devices, featuring trimmed 5.000 V output in a compact SOT-23-5 package with low noise and high accuracy. Ideal for portable instrumentation and data converter references requiring stable supply.

The TMP35GT9Z is a precision analog voltage-output temperature sensor from Analog Devices with ±3°C maximum accuracy and 0.5°C linearity in a 3-pin TO-92 style plastic package. It produces a linear voltage output proportional to temperature, requiring no external calibration for most designs. Available through global distribution with a 10-year estimated product lifetime for industrial and consumer applications.

Linear Technology LT1218CS8#PBF Precision Op Amp, 0.3MHz Rail-Rail, 3 V, 5 V, 8-Pin SOIC

Switching Voltage Regulators 500kHz 6A Hi Eff Sw Reg

HDCP Gigabit Multimedia Serial Link Serializer/Deserializer

MAX9938WEBS+TG45 is a Analog Devices operational amplifier IC for signal conditioning and data acquisition. It combines 4 pins, 4-WLCSP-N/A, -40°C to 85°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Analog Devices, LT1936IMS8E#PBF Switching Regulator, 1-Channel 1.4A 8-Pin, MSOP

Linear Technology LT3760EFE#PBF, LED Display Driver, 6 → 40 V, 28-Pin TSSOP

The MAX9943ATT+ is a precision voltage-feedback operational amplifier with 125 dB typical CMRR and 240 µV maximum input offset voltage, housed in a compact 6-pin LFCSP (3x3x0.75 mm) package for high-accuracy signal conditioning.

MAX9019EKA+ is a Analog Devices integrated circuit for production electronic assemblies. It uses 8 pins with SOT23 (8-Pin) packaging. From RFQ pricing with stock checks and worldwide shipping.

Quad, Ultra-Low-Power, 300Mbps ATE Drivers/Comparators

The MAX9938FEUK+ is a nanoPower precision current-sense amplifier from Analog Devices with a 94 dB minimum CMRR, 600 µV maximum input offset voltage, and voltage-feedback architecture. It is supplied in a 5-pin SOT-23 package for compact battery current monitoring and power management circuits.

The MAX9723DETE+T is a stereo Class AB DirectDrive headphone amplifier with integrated BassMax bass enhancement, I2C-controlled volume control, and a 22 kHz audio bandwidth in a compact 16-pin 4x4 mm LFCSP package. It is designed for portable media players, smartphones, and tablet audio output stages requiring high-quality stereo headphone drive with minimal external components.

MAX6035AAUR50+ is an Analog Devices precision 5.0 V voltage reference in a 3-pin SOT-23 package, supporting high supply voltages. It delivers a tightly regulated output between 4.99 V and 5.01 V with low temperature coefficient. Ideal for ADC reference and precision analog measurement circuits in space-constrained designs.

MAX9273GTL+ is a GMSL (Gigabit Multimedia Serial Link) serializer IC from Analog Devices in a 40-pin TQFN package. It converts parallel video and control data into a high-speed serial stream for transmission over a single coaxial or shielded twisted-pair cable. Designed for automotive camera, infotainment, and industrial vision systems requiring reliable long-reach serial video transport.

28-Bit GMSL Deserializer for Coax or STP Cable

MAX9406ETM+T

MAX9272AGTM+ is an Analog Devices 28-bit GMSL deserializer supporting coaxial and shielded twisted-pair cable transmission, compliant with ISO 10605, housed in a 48-pin 7x7 mm LFCSP package for automotive camera and display link applications requiring high-speed serial link recovery.

The MAX9120EXK+ is a nanopower, beyond-the-rails single comparator operating from a 1.6 V supply in a 5-pin SC70 package. It features 1 nA typical bias current, 10 mV maximum input offset voltage, and rail-exceeding input range, ideal for ultra-low-power battery monitors and threshold-detection circuits.

MAX9093AKA+ is a Analog Devices integrated circuit for industrial electronics and embedded systems. It combines 8 pins, 8-SOT_23-N/A, -40°C to 125°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

MAX6642ATT90+ is a Analog Devices sensor for measurement, monitoring, automation, and embedded feedback systems. It combines 6-pin configuration, Small Outline No-lead assembly style, and datasheet-backed identification. From RFQ-based sourcing, in-stock options can support worldwide shipping.

MAX9063EUK+ is an ultra-small, nanoPower single comparator from Analog Devices in a 5-pin SOT-23 package. It features an open-drain output, extremely low bias current of 15 nA maximum, and operates over a wide supply voltage range for battery-powered applications. Ideal for threshold detection, battery voltage monitoring, and wake-up circuits in IoT sensor nodes and portable devices.

MAX6306UK29D3+ is a Analog Devices integrated circuit for industrial electronics and embedded systems. It combines 5 pins, 5-SOT_23-N/A, 0.1V for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

MAX6746KA29+ is a Analog Devices ceramic capacitor for decoupling networks and filtering stages. It combines 8 pins, 8-SOT_23-N/A, -40°C to 125°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Analog Devices MAX7423EUA+T is a 5th-order elliptic lowpass switched-capacitor filter with a tunable cutoff frequency from 0.001 kHz to 30 kHz, housed in an 8-pin MINI-SO package for precision signal conditioning applications.

The MAX4647EUT+ is a single-pole single-throw (SPST) analog switch from Analog Devices in a 6-pin SOT-23 package, with a negative supply range of -4.5 V to -20 V. Its normally-closed configuration, low on-resistance, and compact footprint suit precision signal routing in portable and battery-powered mixed-signal circuits.

3.3V, 14-Bit, 500Msps High Dyn

MAX6104EUR+ is a Analog Devices integrated circuit for industrial electronics and embedded systems. It combines 3 pins, 3-SOT_23-N/A, -40°C to 85°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

High-Side Current-Sense Amplifiers with Internal Gain, 5 SOT-23

t283555-1

MAX4252EBL+ is a dual general-purpose operational amplifier with ultra-low input bias current of 1 pA and 115 dB common-mode rejection ratio. Packaged in a 9-ball WLCSP for extremely compact designs, it suits precision sensor and signal conditioning applications.

W302A3+2

Analog Devices MAX3228AEEWV+ is a dual RS-232/EIA-232 line transceiver operating from 2.5 V to 5.5 V, featuring Schmitt-trigger inputs and 2 drivers plus 2 receivers in a compact 30-ball UCSP (wafer-level CSP) package. It is designed for space-constrained serial port implementations in portable instruments, handheld terminals, and industrial embedded systems.