Texas Instruments

Precision Amplifiers Low power, rail-to-rail input and output, 24-V, zero-drift operational amplifier

32-bit Microcontrollers - MCU C2000 32-bit MCU with 100-MHz, FPU, TMU, 128-kb flash, CLB 80-LQFP -40 to 125

Digital Signal Processors & Controllers - DSP, DSC Low power C55x fixed point DSP- up to 100MHz, USB, LCD interface 144-NFBGA -40 to 85

Digital Signal Processors & Controllers - DSP, DSC Low power C55x fixed point DSP- up to 100MHz 144-NFBGA -40 to 85

Digital Signal Processors & Controllers - DSP, DSC Low power C55x fixed point DSP- up to 100MHz 144-NFBGA -40 to 85

Digital Signal Processors & Controllers - DSP, DSC Low power C55x fixed point DSP- up to 100MHz, USB, LCD interface 144-NFBGA -10 to 70

Digital Signal Processors & Controllers - DSP, DSC Low power C55x fixed point DSP- up to 100MHz 144-NFBGA -10 to 70

OP Amp Single GP 18V 8-Pin SOIC

Bus Transceivers 8 to 9-Bit Parity Bus Transceivers

Use the download button to access the TLC2933AIPWG4 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS63900DSKR schematic symbol, PCB footprint, and 3D model.

Conv DC-DC 2.7V to 36V Inv/Step Up/Step Down Single-Out 0.8V to 22V

RS-422 Interface IC LoVltg Hi-Sp Quad Diff Line Drvr

Voltage References

Current Sense Amplifiers 2.7 to 110V, 800kHz, ultra-precise current sense amplifier in small (sc-70) package

Flip Flop D-Type Bus Interface Pos-Edge 3-ST 2-Element 24-Pin CDIP Tube

Flip Flop D-Type Bus Interface Pos-Edge 3-ST 2-Element 24-Pin CDIP Tube

LM2576xx Series SIMPLE SWITCHER® 3-A Step-Down Voltage Regulator

Use the download button to access the TLV9104IPWR schematic symbol, PCB footprint, and 3D model.

DRV5053RAEDBZTQ1

Precision Amplifiers Dual, 14MHz, MUX-friendly, low-noise, zero-drift, RRO, CMOS precision operational amplifier 8-VSSOP -40 to 125

The UC2845D8TRG4 is a current-mode PWM switching controller from Texas Instruments in an 8-pin SOIC package. It operates from 7.6 V to 28 V input with a nominal 15 V supply, featuring cycle-by-cycle current limiting and programmable oscillator frequency. Available with worldwide shipping from authorized distributors.

Current Mode PWM Controller 200mA 500kHz 14-Pin SOIC T/R

Operational Amplifiers - Op Amps 40-V, dual 4.5MHz, rail-to-rail input/output, low-offset-voltage, low-noise op amp

Use the download button to access the DRV8353HMRTAT schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - TPS62352YZGT - DC-DC Switching Sync- Buck (Step Down) Regulator, Adj., 2.7V-5.5Vin, 750mV-1.437V/0.8A out, DSBGA-12

Precision Amplifiers Low power, rail-to-rail input and output, 24-V, zero-drift operational amplifier 8-WSON -40 to 125

LDO Voltage Regulators Dual 200mA Out Lo Noise Hi PSRR

LDO Voltage Regulators Dual 200mA Out Low Noise High PSRR

Digital to Analog Converters - DAC Lo-Pwr R-To-R Output 12-Bit Serial Input

Gate Drivers 3-A, 120-V half bridge gate driver with 5-V UVLO, interlock and enable

The TPS61378-Q1 is a fully-integrated synchronous boost converter with an integrated load disconnect function. The input voltage covers 2.3 V to 14 V while the maximal output voltage covers up to 18.5 V. The switching current limit is programmable from 1 A to 4.8 A. The device consumes 25-μA quiescent current from VIN. The TPS61378-Q1 employs peak current mode control with the switching frequency programmable from 200 kHz to 2.2 MHz. The device works in fixed frequency PWM operation in medium to h

Bus Transceivers Octal Bus Transceivr And Register

Texas Instruments CD74ACT540M96G4 is an octal inverting buffer and line driver from the ACT logic family with dual active-low output enable control. Features unidirectional data flow, 24mA output low current capability, 50pF load capacitance rating, and 20-pin SOIC package for high-drive bus interfacing. Available in tape-and-reel with RoHS-compliant lead-free construction. In stock worldwide with fast shipping.

Use the download button to access the ISO1640BDR schematic symbol, PCB footprint, and 3D model.

Supervisory Circuits Nanopower high-input voltage supervisor with manual reset and programmable-reset time delay 5-SOT-23 -40 to 125

16-bit Microcontrollers - MCU 25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, Comparator, DMA, UART/SPI/I2C, USB, HW Multiplier 80-NFBGA -40 to 85

High Speed Operational Amplifiers 12.6V, Low-noise, single-ended-to-differential, high input impedance amplifier

DAC 1-CH Current Steering 8-bit 16-Pin SOIC T/R

Latches Mil Enhance 3.3V ABT 16B Transp D-Type

Use the download button to access the LM60430DRPKR schematic symbol, PCB footprint, and 3D model.

Voltage References Adj MicroPwr Vtg Ref

The ADC122S655CIMMX/NOPB is a 2-channel, 12-bit successive approximation ADC from Texas Instruments with a 500 ksps sample rate in a 10-pin VSSOP package. It features a serial SPI interface, up to 5.5 V analog input range, and a maximum conversion time of 7.5 µs for high-speed data acquisition. Available with worldwide shipping from authorized distributors.

REF3425S-Q 2.5V - 6 PPM/C SOT23-5

Use the download button to access the LM1875T/NOPB schematic symbol, PCB footprint, and 3D model.

Use the download button to access the PCM1840IRTWR schematic symbol, PCB footprint, and 3D model.

PARITY GENERATOR/CHECKER, 14 Pin, Ceramic, DIP

Analog to Digital Converters - ADC 8 Bit, 80 MSPS ADC Single Ch., High Ch. Bandwidth, Low Power 28-TSSOP 0 to 70

LDO Voltage Regulators 150-mA, off-battery (40-V), ultra-low-IQ, low-dropout (LDO) voltage regulator with enable

The TMUX6104 36-V is a precision 4:1 analog multiplexer from Texas Instruments rated for up to 36 V supply operation, featuring low channel capacitance and ultra-low leakage current for minimal signal distortion in high-accuracy measurement and data acquisition systems. Its rail-to-rail signal path and bidirectional switch channels support both single-ended and differential analog routing. Available from stock with worldwide shipping.